TGL2927-SM 24 GHz 200 Watt VPIN Limiter Product Overview Qorvos TGL2927-SM is a high-power receive protection circuit (limiter) operating from 2-4 GHz. Capable of withstanding up to 200 W incident power levels, the TGL2927-SM allows < 18 dBm flat leakage to pass through and contributes < 0. 6dB in insertion loss. Using Qorvos passive GaAs VPIN technology, the TGL2927-SM does not require bias and is offered in a small 4 x 4 (mm) plastic overmold package. This simplifies 20 Pad 4x4mm QFN Package system integration while maximizing performance and protection. Key Features The TGL2927-SM is ideal for commercial and military radar applications where protecting sensitive receive Frequency Range: 2 to 4 GHz components from damage is critical. Insertion Loss: 0.5 dB Peak Power Handling: 200 W (pulsed) Lead-free and RoHS compliant. Flat Leakage: 15 dBm Spike Leakage: < 1 dB Recovery Time: < 20 nS Passive (no DC bias required) Integrated DC Block on output Package Dimensions: 4 x 4 x 0.85 mm Performance is typical across frequency. Please Functional Block Diagram reference electrical specification table and data plots for more details. 20 19 18 17 16 Applications 1 21 15 Receive Chain Protection 2 14 Commercial and Military Radar 3 13 Communications Electronic Warfare 4 12 5 11 Ordering Information 6 7 8 9 10 Part Description Top View TGL2927-SM 200W S-Band VPIN Limiter 200W S-Band VPIN Limiter TGL2927-SM EVB Evaluation Board Data Sheet Rev. C, June 20, 2018 Subject to change without notice 1 of 8 www.qorvo.com TGL2927-SM 24 GHz 200 Watt VPIN Limiter Absolute Maximum Ratings Recommended Operating Conditions Parameter Min Typ Max Units Parameter Rating Incident Power, Pulsed (500 us / 15%), Passive No Bias 54.0 dBm 50 , 25 C Temperature Range -40 25 85 C Incident Power, Pulsed (500 us / 15%), Electrical specifications are measured at specified test conditions. 50.5 dBm 50 , 85 C Specifications are not guaranteed over all recommended operating conditions. Mounting Temperature (30 s max) 260 C Storage Temperature -55 to 150 C Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. (1) Electrical Specifications Parameter Conditions Min Typ Max Units Operational Frequency Range 2 4.0 GHz Insertion Loss 2.0 4.0 GHz 0.2 0.50 0.85 dB Input Return Loss 10 15 dB Output Return Loss 11 15 dB Flat Leakage Power P > 30 dBm 15 20 dBm IN Spike Leakage < 1.0 dB Pulse Recovery Time < 20 nS Insertion Loss Temperature Coefficient 0.001 dB/ C Notes: 1. Test conditions unless otherwise noted: Temp=2+5 C, S-Parameters CW, Power Pulse Parameters: PW = 500 us, Duty Cycle = 15% Thermal and Reliability Information Parameter Test Conditions Value Units Incident Power Frequency = 3.3 GHz, Pulsed, PW = 100 us, 200 W (1) (RF Operational Life Test 168 Hours ) DC = 10%, 50 , 25 C Notes: 1. Test was terminated at 168 hours. Insertion Loss remained 1 dB for device under tes t. Data Sheet Rev. C, June 20, 2018 Subject to change without notice 2 of 8 www.qorvo.com