TQP369182 DC 6 GHz Gain Block General Description The TQP369182 is a general-purpose buffer amplifier that offers high dynamic range in a low-cost surface-mount package. At 1.9 GHz, the amplifier typically provides 20.7 dB gain, +28 dBm OIP3, and 3.9 dB Noise Figure while SOT-89 Package drawing 45 mA current. The device combines dependable performance with consistent quality to maintain MTTF values exceeding 100 years at mounting temperatures of +85C. The device is housed in a lead-free/green/RoHS- Product Features compliant industry-standard SOT-89 package. DC-6000 MHz The TQP369182 consists of a Darlington-pair amplifier Flat, broadband frequency response using TriQuints high reliability InGaP/GaAs HBT process 20.7 dB Gain at 1.9 GHz technology. Only DC-blocking capacitors, a bias resistor, 3.9 dB Noise Figure at 1.9 GHz and an inductive RF choke are required for operation. +28 dBm Output IP3 at 1.9 GHz This broadband MMIC amplifier can be directly applied to +15.1 dBm P1dB at 1.9 GHz various current and next generation wireless technologies 50 Ohm Cascadable Gain Block such as CDMA, W-CDMA, and LTE. In addition, the Single Supply, 45 mA Current TQP369182 will work for other applications within the DC to 6 GHz frequency range. SOT-89 Package Applications Wireless Infrastructure CATV / SATV / MoCA Point to Point Functional Block Diagram Defense & Aerospace GND Test & Measurement Equipment General Purpose Wireless 4 1 2 3 RF IN GND RF OUT Ordering Information Part No. Description TQP369182 InGaP / GaAs HBT Gain Block TQP369182-PCB 5006000 MHz Evaluation Board Standard T/R size = 2500 pieces on a 13 reel Datasheet, November 5, 2021 Subject to change without notice 1 of 10 www.qorvo.com TQP369182 DC 6 GHz Gain Block Absolute Maximum Ratings Recommended Operating Conditions Parameter Rating Parameter Min Typ Max Units Storage Temperature 55 to 150C TCASE 40 +85 C 6 RF Input Power, CW, 50, T=25 C +24 dBm Tj (for >10 hours MTTF) +170 C Device Voltage (VCC) +4.5 V Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all Operation of this device outside the parameter ranges given recommended operating conditions. above may cause permanent damage. Electrical Specifications Test conditions unless otherwise noted: I =45 mA, T = +25C, 50 system CC CASE Parameter Conditions Min Typ Max Units Operational Frequency Range DC 6000 MHz Test Frequency 1900 MHz Gain 19.2 20.7 22.2 dB Input Return Loss -21 dB Output Return Loss -20 dB Output P1dB +15.1 dBm Output IP3 Pout=0 dBm/tone, f= 1 MHz +25.5 +28.0 dBm Noise Figure 3.9 dB Device Voltage (VCC) 3.0 3.9 4.5 V Device Current (I ) 45 mA CC (1) Thermal Resistance (jc) Junction to case 128 C/W Notes: 1. Thermal path is from the device junction through the package ground tab (pins 2,4) to the backside mounting surface. Datasheet, November 5, 2021 Subject to change without notice 2 of 10 www.qorvo.com