R183405067W Radiall

Technical Data Sheet SQUARE FLANGE JACK RECEPTACLE PANEL SEAL WITH SOLDER POT CONTACT PAGE 1/2 ISSUE 04-01-16A SERIES 4.3-10 PART NUMBER R183405067 All dimensions are in mm . pn ao COMPONENTS MATERIALS PLATING (m) Body BRASS. BBR Center contact BRONZE,BRASS SILVER Outer contact BRONZE SILVER Insulator PTFE Gasket SILICONE RUBBER Others parts - - - - - - This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary. Technical Data Sheet SQUARE FLANGE JACK RECEPTACLE PANEL SEAL WITH SOLDER POT CONTACT PAGE 2/2 ISSUE 04-01-16A SERIES 4.3-10 PART NUMBER R183405067 PACKAGING Standard Unit Other 25 Contact us Contact us ELECTRICAL CHARACTERISTICS Impedance 50 Frequency 0-6 GHz VSWR 1.02* + 0.0100 x F(GHz) Maxi Insertion loss 0.05* F(GHz) dB Maxi RF leakage - ( ** - F(GHz)) dB Maxi ENVIRONMENTAL Voltage rating 1000 Veff Maxi Dielectric withstanding voltage 2500 Veff mini -55/+90 Operating temperature C 5000 Insulation resistance M mini Hermetic seal NA Atm.cm3/s Panel leakage IP67 MECHANICAL CHARACTERISTICS SPECIFICATION Center contact retention Axial force Mating End 30 N mini 30 Axial force Opposite end N mini Torque 5 N.cm mini OTHER CHARACTERISTICS Recommended torque Mating NA N.cm Panel nut NA N.cm Assembly instruction:NA Mating life 100 Cycles mini Weight 54.6700 g Others: *Coaxial Transmission Line Only. ** RF leakage typical >=110dB DC-3GHz PIM3<-123 dBm 2x20W This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.