R570442010

Technical Data Sheet SPDT Ramses SMA 18GHz Latching Indicators 12Vdc Positive common Pins Terminals PAGE 1/2 ISSUE 15.05.15 SERIE : SPDT PART NUMBER : R570442010 RF CHARACTERISTICS Frequency range : 0 - 18 GHz Impedance : 50 Ohms Frequency (GHz) DC - 3 3 - 8 8 - 12.4 12.4 - 18 VSWR max 1.10 1.20 1.20 1.40 Insertion loss max 0.15 dB 0.20 dB 0.25 dB 0.35 dB Isolation min 80 dB 75 dB 65 dB 60 dB Average power (*) 240 W 150 W 120 W 100 W ELECTRICAL CHARACTERISTICS Actuator : LATCHING Nominal current ** : 210 mA Actuator voltage (Vcc) : 12V (10.2 to 13V) / POSITIVE COMMON Terminals : solder pins (250C max. / 30 sec.) Indicator rating : 1 W / 30 V / 100 mA MECHANICAL CHARACTERISTICS Connectors : SMA female per MIL-C 39012 Life : 10 million cycles Switching Time*** : < 10 ms Construction : Splashproof Weight : < 45 g ENVIRONMENTAL CHARACTERISTICS Operating temperature range : -40C to +85C Storage temperature range : -55C to +85C (* Average power at 25C per RF Path) (** At 25 C 10%) (*** Nominal voltage 25 C) This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.Technical Data Sheet SPDT Ramses SMA 18GHz Latching Indicators 12Vdc Positive common Pins Terminals PAGE 2/2 ISSUE 15.05.15 SERIE : SPDT PART NUMBER : R570442010 DRAWING LABEL RADIALL R570442010 0 - 18 GHz Un : 12V Lot : General tolerances : 0.5 mm SCHEMATIC DIAGRAM Voltage RF Continuity Ind. +C -1 C 1 C.1 +C -2 C 2 C.2 This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.