R577832100 Radiall

Technical Data Sheet DPDT Ramses SMA2.9 40GHz Latching 12Vdc TTL Diodes Pins Terminals with bracket PAGE 1/2 ISSUE 11-04-17 SERIE : DPDT PART NUMBER : R577832100 RF CHARACTERISTICS Frequency range : 0 - 40 GHz Impedance : 50 Ohms Frequency (GHz) DC - 6 6 - 12.4 12.4 - 18 18 - 26.5 26.5 - 40 VSWR max 1.30 1.40 1.50 1.70 1.90 Insertion loss max 0.30 dB 0.40 dB 0.50 dB 0.70 dB 0.80 dB Isolation min 70 dB 60 dB 60 dB 55 dB 50 dB Average power (*) 80 W 60 W 50 W 20 W 10 W ELECTRICAL CHARACTERISTICS Actuator : LATCHING Nominal current ** : 320 mA Actuator voltage (Vcc) : 12V (10.2 to 13V) Terminals : solder pins (250C max. / 30 sec.) TTL inputs (E) - High level : 2.2 to 5.5 V / 800A at 5.5 V - Low level : 0 to 0.8 V / 20A at 0.8 V MECHANICAL CHARACTERISTICS Connectors : SMA 2.9 female per MIL-C 39012 Life : 2.5 million cycles Switching Time*** : < 15 ms Construction : Splashproof Weight : < 100 g ENVIRONMENTAL CHARACTERISTICS Operating temperature range : -40C to +85C Storage temperature range : -55C to +85C (* Average power at 25C per RF Path) (** At 25 C 10%) (*** Nominal voltage 25 C) This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.Technical Data Sheet DPDT Ramses SMA2.9 40GHz Latching 12Vdc TTL Diodes Pins Terminals with bracket PAGE 2/2 ISSUE 11-04-17 SERIE : DPDT PART NUMBER : R577832100 DRAWING LABEL RADIALL R577832100 0 - 40 GHz Un : 12V Lot : General tolerances : 0,5 mm 0,02 in SCHEMATIC DIAGRAM TTL input RF Continuity E1=1 / E2=0 1 3 / 2 4 E1=0 / E2=1 1 2 / 3 4 E1=0 / E2=0 Memory E1=1 / E2=1 Forbidden This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.