Qualified with 65kV/s Vcommon mode =1KV Features 6V Output for GaN driver Applications DC/DC Converter Pot-Core Transformer with separated windings High 6.4kVDC/sec Isolation in compact size Unregulated Low isolation capacitance (10pF max.) Converters UL/IEC/EN62368-1 and IEC/EN60950-1 certified RxxP06S Description 1 Watt High slew rate GaN transistor drivers require an isolated 6V supply with high isolation voltage SIP7 and low isolation capacitance. The RxxP06S series have been specially designed to fulfill this demanding requirement with 6400VDC/sec isolation and <10pF isolation capacitance. The internal Output for GaN transformer uses a pot-core to physically separate the input and output windings, yet the converter still fits into an industry standard SIP7 case. Input voltage options of 5, 12, 15 or 24V are available Application and the RxxP06S series is safety certified to the latest UL/IEC62368 standard. Selection Guide Part nom. Input Output Output Efficiency max. Capacitive (1) (2) Number Voltage Voltage Current typ. Load VDC VDC mA % F R05P06S 5 6 167 76 1000 R12P06S 12 6 167 81 1000 R15P06S 15 6 167 79 1000 R24P06S 24 6 167 80 1000 Notes: Note1: Efficiency is tested at nominal input and full load at +25C ambient Note2: Max Cap Load is tested at nominal input and full resistive load E224736 UL62368-1 certified CAN/CSA-C22.2 No. 62368-1-14 certified IEC/EN62368-1 certified IEC/EN60950-1 certfied CB Report Model Numbering R P06 S nom. Input Voltage Single Output Output Voltage www.recom-power.com/eval-ref-boards www.recom-power.com/bier www.recom-power.com REV.: 3/2018 ECO-1RxxP06S DC/DC Converter Series Specifications (measured Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Internal Input Filter capacitor type 5VDC 4.5VDC 5.5VDC 12VDC 10.8VDC 13.2VDC Input Voltage Range nom. Vin = 15VDC 13.5VDC 16.5VDC 24VDC 21.6VDC 26.4VDC (3) Minimum Load 0% Internal Operating Frequency 5VDC, 12VDC, 15VDC 55kHz nom. Vin = 20kHz 24VDC 60kHz Output Ripple and Noise 20MHz BW 200mVp-p Notes: Note3: Operation below 10% load wont harm the converter, but specifications may not be met Efficiency vs. Load 100 90 80 70 60 50 40 30 R05P06S R12P06S 20 R15P06S 10 R24P06S 0 0 10 20 30 40 50 60 70 80 90 100 Output Load % REGULATIONS Parameter Condition Value Output Accuracy 5.0% max. Line Regulation low line to high line, full load 1.2% typ. /1% of Vin 5VDC, 12VDC 6.0% typ. / 15.0% max. Load Regulation 10% to 100% load nom. Vin = 15VDC 5.0% typ. / 15.0% max. 4.0% typ. / 15.0% max. 24VDC continued on next page www.recom-power.com REV.: 3/2018 ECO-2 Efficiency %