RCD-24-0.30W

UL/ RAILWAYS Certified Constant Current LIGHTLINE Features LED Driver DC/DC-Converter Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming Regulated with 5 year Warranty Short Circuit Protected Converters Pinned or Wired Versions IP67 rated for /W Version 96% Efficiency 5 year Warranty Constant Description Current LED The RCD series is a step-down constant current source designed for driving high power white LEDs. Standard output currents available are 300mA, 350mA, 500mA, 600mA, 700mA, 1000mA and 1200mA to make this driver compatible with a wide range of LEDs applications. Despite its compact size, the RCD series is fully Driver featured with very high efficiency, wide input voltage range, high ambient operating temperature and two means of dimming: PWM/digital control and analogue voltage dimming. Both dimming controls are independent and can be combined. The driver is also designed to be as reliable as the LEDs it is driving, even at the full operating temperature. Options include an IP67-rated wired version (/W) and a version with built-in reference output vol- tage (/Vref) to power sensors or for easy analogue dimming. Selection Guide Part Input Output Output Dimming Options Mounting Number Range Current Voltage Control Style (VDC) (mA) (Vmin-Vmax) (a)(b) RCD-24-0.30 4.5-36V 0-300 2-35 Digital + Analogue Vref Pins or Wired (a)(b) RCD-24-0.35 4.5-36V 0-350 2-35 Digital + Analogue Vref Pins or Wired (a)(b) RCD-24-0.50 4.5-36V 0-500 2-35 Digital + Analogue Vref Pins or Wired RoHS (a)(b) 2011/65/EU RCD-24-0.60 4.5-36V 0-600 2-35 Digital + Analogue Vref Pins or Wired 6/6 (a)(b) E358085 RCD-24-0.70 4.5-36V 0-700 2-35 Digital + Analogue Vref Pins or Wired (b) RCD-24-1.00 6-36V 0-1000 3-31 Digital + Analogue Pins or Wired EN-50121-3-2 Certified (b) RCD-24-1.20 6-36V 0-1200 3-31 Digital + Analogue Pins or Wired EN-60950-1 Certified (a)(b) UL-60950-1 Certified Standard is no suffix with PCB Pins. (a) Add suffix /Vref for pinned version with Vref output and analogue dimming (b) Add suffix /W for wired version without dimming control (four wires) (b) Add suffix /W/X1 for wired version with analogue dimming control (five wires) RCD-24 (b) Add suffix /W/X2 for wired version with PWM dimming control (five wires) (b) Add suffix /W/X3 for wired version with both analogue and PWM dimming controls (six wires) (a) Add suffix /W/Vref for wired version with Vref output and analogue dimming (six wires) Specifications (typical at 25C, nominal input voltage, rated output current unless otherwise specified ) Derating-Graph Input Voltage (absolute maximum) 40VDC max Recommended Input Voltage 300mA-700mA 5V min. / 24V typ. / 36VDC max (Ambient Temperature) 1000mA-1200mA 6V min. / 24V typ. / 36VDC max Input Filter Capacitor Output Current Accuracy 300mA-700mA 1% typ, 3% max. (Vin = 24DC) 1000mA-1200mA 2% typ, 5% max. Internal Power Dissipation Worst case load of 5 LEDs 800mW max Output Current Stability Vin=36V, Vout =1-9 LEDs 1% max Output Ripple and Noise (20MHz BW) 300mA-700mA 150mVp-p max Vin=36V, Vout =1-9 LEDs 1000mA-1200mA 300mVp-p max Temperature Coefficient -40C to +85C ambient 0.015%/C max Maximum Capacitive Load 100F Operating Frequency 300mA-700mA 210kHz min/ 250kHz typ/ 280kHz max 1000mA-1200mA 350kHz min/ 450kHz typ/ 550kHz max Efficiency at Full Load 96% max. Short Circuit Protection Regulated at rated output current continued on next page Refer to Application Notes www.recom-power.com REV: 1/2016 L-3 RCD-24 LIGHTLINE DC/DC-Converter Series Specifications (typical at 25C, nominal input voltage, rated output current unless otherwise specified ) Operating Temperature Range 300mA-350mA -40C to +85C Digital Dimming (free air convection) 500mA -40C to +80C 600mA -40C to +75C 700mA-1000mA -40C to +71C 1200mA -40C to +65C Storage Temperature Range -55C to +125C % Maximum Case Temperature 100C Thermal Impedance Natural Convection 55C/Watt Case Material (Pinned or Wired Versions) Non Conductive Black Plastic Potting Material (Pinned or Wired Versions) Epoxy (UL94-V0) Dimensions Pinned/Wired 22.1 x 12.6 x 8.5mm Weight Pinned/Wired 4.5g/6.8g Soldering Profile Pinned 265C/10 sec. max Packing Quantities Pinned Versions 39pcs per Tube (Refer to App Notes for Tube sizes) Wired Versions 5pcs per Bag PWM Dimming and ON/OFF Control (Leave open if not used - do not tie to +Vin) % Remote ON/OFF DC/DC ON 300mA-700mA Open or 0V<Vr<0.6V Threshold Voltages 1000mA-1200mA Open or 0V<Vr<0.8V DC/DC OFF (Standby) 300mA-700mA 0.6<Vr<2.9V 1000mA-1200mA 1.4<Vr<2.2V DC/DC OFF (Shutdown) 300mA-700mA 2.9V<Vr<6V Analogue Dimming 1000mA-1200mA 2.2V<Vr<15V Remote Pin Drive Current Vr=5V 1mA max Standard Version: Quiescent Input Current in Shutdown Mode Vin=36V 200A max % ) % Maximum PWM Frequency For Linear Operation 200Hz max. Frequency Limit 1000Hz max. Analogue Dimming Control (leave open if not used - do not tie to +Vin) Input Voltage Limits Standard -0.3V - 15V Vref Version -0.3V - 5V Control Voltage Range Full On 0.13V 50mV * * (see Graphs) 300, 700, 1200mA: Full Off 4.2V 150mV ( ( 1000mA: Full Off 4.35V 100mV ( % & Vref Version: Full Off 2.6V 100mV Analogue Pin Drive Current Vc=5V 0.2mA max. Vref Version: Vref Version Vref Voltage 3.3V 70mV + , % ) % Vref Output Current 5mA Vref Output Short Circuit Current 18mA typ. Environmental Relative Humidity 5% to 95% RH, non-condensing /W Versions IP67 Shock / Vibration EN61373 EMC Railways EN50121-3-2:2006 Conducted Emissions (with filter, see note) EN55022 Class B ( ( Radiated Emissions (all series except >700mA) EN55022 Class B % & ESD EN61000-4-2 Criterion A Radiated Immunity EN61000-4-3 Criterion A Combined PWM and Analogue Dimming Fast Transient EN61000-4-4 Criterion A Conducted Immunity EN61000-4-6 Criterion A MTBF (RCD-24-0.70, Nominal Vin, Full Load) +25C 605 x 10 hours using MIL-HDBK 217F +71C 516 x 10 hours Safety Standards EN General Safety Report: SPCLVD1109081EN60950-1 2nd Edition EMC Railway Report: 12A082105E-C EN50121-3-2 UL General Safety Report: E358085-A3 UL60950-1 CSA C22.2 No 60950-1-03 & Note: 1. Requires an input filter to meet EN55022 Class B conducted emissions - see next page & ( ( ) 2. All LED Drivers may not be used without a load. They must be switched on the primary side only. Noncompliance may damage the LED or reduce its lifetime. L-4 REV: 1/2016 www.recom-power.com RCD-24