Universal AC input range: 90-264VAC Features Suitable for DALI installation AC/DC Converter EN61347-1 certified DALI Cooling by free air convection Over current and short circuit protected Power Supply RELV4-16 Description DALI The RELV4-16 is designed to power a DALI digital lighting control bus. The output is current limited to 200mA, sufficient to power a complete DALI zone with up to 64 addressable DALI devices. The universal Bus input voltage range from 90V to 264VAC enables the RELV4-16 to be used anywhere in the world. Due to its compact design with mounting tabs, it can be easily and conveniently integrated into any DALI Power Supply network. An indicator LED shows Power OK and DALI bus traffic to aid installation and commissioning. The RELV4-16 comes with a 5 year warranty. Selection Guide Part Input Input Current Output Output Output Efficiency Number Voltage Range ( 115VAC) Voltage Current Power typ. VAC mA VDC mA W % RELV4-16 90-264 110 16 200 3.2 68 Specifications (measured Ta= 25C and 230VAC) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Voltage Range 90VAC 230VAC 264VAC Output Voltage Range full load 16VDC EN61347-1 certified DC Voltage Range 13.6VDC 18.4VDC EN61347-2-11 certified 115VAC 21A EN55015 certified Inrush Current 230VAC 42A EN61547 certified 13.6VDC 240mA DC Output Current Range 18.4VDC 180mA 115VAC 1s Start-up Time 230VAC 0.5s Rise and Fall Times 10s 100s Input Frequency Range 47Hz 63Hz (1) Ripple and Noise 150mVp-p Notes: Note1: Ripple and Noise is measured 20MHz BW by using a 12 twisted pair-wire terminated with 0.1F & 47F parallel capacitor REGULATIONS Parameter Condition Value (2) Output Accuracy 15% typ. Current Tolerance +20% / -10% typ. Notes: Note2: Voltage Tolerance includes line regulation, load regulation and set-up tolerance www.recom-power.com REV.: 1/2019 L-1RELV4-16 AC/DC Converter Series Specifications (measured Ta= 25C and 230VAC) PROTECTION Parameter Condition Value Short Circuit Protection (SCP) with terminal switch (80C typ.) Limiting Current Mode Over Current Protection (OCP) 240mA max. Limiting Current Mode Isolation Voltage 3.75kVAC / 1 Minute Isolation Resistance 500VDC at 25C 100MW Isolation Grade Double Isolated for SELV Output ENVIRONMENTAL Parameter Condition Value Operating Temperature Range -20C to +45C Max. Case Temperature +65C Operating Humidity non-condensing 20% to 90% RH IP Rating IP20 Vibration 10-500Hz, 2G, 60Min. along X, Y and Z MTBF MIL-HDBK-217F, at 25C 200 x 10 hours Derating Graph 100 80 60 40 20 0 -20 -10 0 10 20 30 40 50 60 45 Ambient Temperature C SAFETY AND CERTIFICATIONS Certificate Type (Safety) File Number Standard Lamp Controlgear - Part 1: General and safety requirements EN61347-1:2015 Lamp Controlgear - Part 2-11: Particular requirements for miscellaneous IEC61347-2-11:2001, 1st Edition electronic circuits used with luminaires EN61347-2-11:2001 RoHS 2+ RoHS 2011/65/EU + AM2015/863 continued on next page www.recom-power.com REV.: 1/2019 L-2 Output Power %