RPP20-4805SW

115C Maximum Case Temperature Features POWERLINE+ -40C Minimum Temp. DC/DC-Converter UL Certified with 3 year Warranty Built-in FCC/EN55022 Class B Filter ICE 4:1 Wide Input Voltage Range Technology* Six Sided Shielded Enclosure Ribbed or Baseplate Case Styles Min. Efficiency 86% 2kVDC Isolation Low Quiescent Current 20 Watt The RPP20-W series 4:1 input range DC/DC converters are ideal for high end industrial Description 4:1 Single & applications and COTS Military applications where a very wide operating temperature range of -40C to +115C is required. Although the case size is compact, the converter contains a built-in filter EN55022 Class B / FCC Level B without the need for any external Dual Output components. The RPP20-W is available in two case styles: the ribbed case for active cooling and the baseplate case for high vibration, bulkhead-mounting or for passive cooling appli- cations. They are UL-60950-1 certified. Selection Guide 24V and 48V 4:1 Input Types (1) (2) Part Number Input Output Output Input Efficiency Range Voltage Current Current (Min.) VDC VDC mA mA RPP20-243.3SW** 9-36 3.3 6000 59/955 87% RPP20-2405SW** 9-36 5 4000 65/946 86% RPP20-2412SW** 9-36 12 1666 23/946 86% RoHS 2011/65/EU 6/6 RPP20-2415SW** 9-36 15 1333 25/931 86% UL-60950-1 Certified RPP20-2424SW** 9-36 24 830 25/931 86% E224736 RPP20-483.3SW** 18-75 3.3 6000 28/465 87% RPP20-4805SW** 18-75 5 4000 33/465 86% RPP20-4812SW** 18-75 12 1666 13/470 86% RPP20-4815SW** 18-75 15 1333 12/466 86% RPP20-W RPP20-4824SW** 18-75 24 830 12/466 86% RPP20-2412DW** 9-36 12 833 28/930 86% RPP20-2415DW** 9-36 15 666 24/946 87% RPP20-2424DW** 9-36 24 416 24/946 87% RPP20-4812DW** 18-75 12 833 16/472 86% * ICE Technology RPP20-4815DW** 18-75 15 666 13/466 87% ICE (Innovation in Converter Excellence) RPP20-4824DW** 18-75 24 416 13/466 87% uses state-of-the-art techniques to ** add suffix for case options minimise internal power dissipation and to increase the internal temperature limits to extend the ambient operating SUFFIX INFORMATION temperature range to the maximum. Refer to Application Notes none = Standard Ribbed Case -B = Baseplate Case For other CTRL logic (-1), case style (-F) or low temperature options (-L, -M, -T) please contact RECOM for availability. www.recom-international.com REV: 0/2014 PP-7RPP20-S DW POWERLINE+ DC/DC-Converter Series Specifications (typical at nominal input and 25C unless otherwise noted) Input Voltage Range 24V nominal input 9-36VDC 48V nominal input 18-75VDC Under Voltage Lockout 24V input DC-DC ON (min.) 8.5VDC DC-DC OFF (max.) 8VDC 48V input DC-DC ON (min.) 17.5VDC DC-DC OFF (max.) 17VDC Input Filter Common Mode EMC Filter Input Surge Voltage (100 ms max.) 24V Input 50VDC 48V Input 100VDC Input Reflected Ripple nominal Vin and full load 200mAp-p Start Up Time nominal Vin and constant resistor load 20ms typ., 50ms max. (3) Remote ON/OFF Logic High Open or 3.0V < Vr < 5.5V Logic Low Short or 0V < Vr < 1.2V Remote OFF input current Nominal input 2mA typ. Output Power 20W Output Voltage Accuracy Nominal Vin 1.5% Voltage Adjustability Single Output only 5% Minimum Load 0% Line Regulation low line, high line at full load 0.3% Load Regulation 10% to 100% full load 0.5% Cross Regulation (10% <> 100% Load) Dual Outputs only 3% typ. / 5% max. Ripple and Noise (20MHz bandwith limited) 3.3V 100mVp-p typ. (measured with 1F capacitor across outputs) All others 40mV-75mVp-p typ. Temperature Coefficient 0.04%/C max. Transient Response 25% load step change 800s Over Load Protection % of full load at nominal Vin 120% typ. Short Circuit Protection Power Limit, automatic recovery Output Over Voltage Protection (refer to block diagram in Application Notes) Converter shutdown if Vout > Vout nominal + 20% Isolation Voltage Rated at 1600VDC/1 minute, Flash tested at 2000VDC/1 second Isolation Resistance 10M min. Isolation Capacitance (refer to block diagram in Application Notes) 1500pF max. Operating Frequency 260kHz 40kHz Operating Temperature Range Ambient, Free Convection -40C to see Calculation (Note 7) Maximum Case Temperature +115C Storage Temperature Range -55C to +125C Over Temperature Protection (refer to block diagram in Application Notes) internal thermistor Thermal Impedance Ribbed Case: Vertical 7.5C/Watt (Natural convection) Ribbed Case: Horizontal 11.5C/Watt Relative Humidity 5% to 95% RH (6) Case Material Aluminium Potting Material Silicone (UL94-V0) continued on next page PP-8 REV: 0/2014 www.recom-power.com RPP20-W