Twin independent outputs Features 1kVDC or 2kVDC input/output basic isolation 1kVDC output/output isolation DC/DC Converter Power sharing on outputs Unregulated Standard and miniature versions Optional continued short circuit protected Converters RU/RUM Efficiency up to 76% Description 1 Watt The RU DC/DC converter offers two independent isolated outputs. Typical applications include multiple SIP7 channel circuits where inter-channel isolation is also required. The RUM offers similar specifications in a miniature case for applications where space is at a premium. Both converters offer 1KVDC input/output isolation and 1kVDC output/output isolation. The /H versions offer 2kVDC isolation Isolated between input and outputs. Dual Output Selection Guide Part nom. Input Output Output Output Efficiency max. Capacitive (1) (2) Number Voltage Voltage V1 Voltage V2 Current typ. Load VDC VDC VDC mA % F (3,4) RU-3.30505 3.3 5 5 100/100 76 470/470 (3,4) RU-050505 5 5 5 100/100 72 470/470 (3,4) RUM-3.30505 3.3 5 5 100/100 78 470/470 (3,4) RUM-050505 5 5 5 100/100 72 470/470 Notes: Note1: Efficiency is tested at nominal input and full load at +25C ambient Note2: Max Cap Load is tested at nominal input and full resistive load and is defined as the capacitive load that will allow start up in under 1s without damage to the converter Model Numbering IEC60950-1 certified EN60950-1 certified RU- / (3) Protection nom. Input Voltage (4) Isolation Option Output Voltage RUM- / (3) Protection nom. Input Voltage (4) Isolation Option Output Voltage Notes: Note3: standard part is without continuous short circuit protection add suffix /P for continuous short circuit protection Note4: add suffix /H for 2kVDC isolation or add suffix /HP for 2kVDC isolation and continuous short circuit protection Ordering Examples: RU-050505/P= 5V Input Voltage, 5V Output Voltage (V1VDC), 5V Output Voltage (V2VDC) with continuous short circuit protection RUM-3.30505/HP= 12V Input Voltage, 24V Output Voltage (V1VDC), 24V Output Voltage (V2VDC) with 2kVDC isolation and continuous short circuit protection www.recom-power.com REV.: 1/2018 ECO-1RU/RUM DC/DC Converter Series Specifications (measured Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Voltage Range 10% (5) Minimum Load 0% Internal Operating Frequency 20kHz 70kHz 105kHz RU 75mVp-p Output Ripple and Noise 20MHz BW RUM 100mVp-p Notes: Note5: Operation below 10% load will not harm the converter, but specifications may not be met Efficiency vs. Load 100 90 80 70 60 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80 90 100 Output Load % REGULATIONS Parameter Condition Value Output Accuracy 5.0% max. Line Regulation low line to high line 1.2% of 1.0% Vin typ. 15.0% max. 3.3, 5Vout Load Regulation 10% to 100% load 12, 15, 24Vout 10.0% max. Deviation vs. Load 25 20 15 10 5 0 -50 -10 0 10 20 30 40 50 60 70 80 90 100 Output Load % continued on next page www.recom-power.com REV.: 1/2018 ECO-2 Deviation % Efficiency %