Phone +1 (717) 767-6511 Bulletin No. G307K2-F Fax +1 (717) 764-0839 Drawing No. LP0889 www.redlion.net Released 2015-11-23 MODELG307K2KADET2OPERATORINTERFACEWITH7 TFTDISPLAY CONFIGURED USING CRIMSON 3 SOFTWARE THREE SERIAL COMMUNICATIONS PORTS (1 RS-232 AND 2 RS-232/422/485 PORTS) 10 BASE-T/100 BASE-TX ETHERNET PORT COMMUNICATES WITH UP TO FOUR PROTOCOLS SIMULTANEOUSLY UNITS CONFIGURATION IS STORED IN NON-VOLATILE FLASH MEMORY SD CARD SOCKET FOR LOADING DATABASE IN FIELD 7-INCH TFT LCD 32k COLOR 800 X 480 PIXEL DISPLAY NEMA 4/IP65 FRONT PANEL THREE FRONT PANEL LED INDICATORS POWER UNIT FROM 24 20% VDC U RESISTIVE ANALOG TOUCHSCREEN R C L US LISTED IND. CONT. EQ. 22SV GENERALDESCRIPTION CONTENTSOFPACKAGE The G307K2 is the perfect solution for applications that require the - G307K2 Operator Interface. operator to monitor and control more than just a single device. With three - Hardware packet for mounting unit into panel. serial ports and an Ethernet port, the 7 Kadet 2 can connect to multiple - Terminal block for connecting power. serial and Ethernet devices simultaneously, including PLCs, motor - Spare fuse. drives, bar code scanners, etc. The G307K2 performs the functions of a multiple protocol converter, ORDERINGINFORMATION using three high-speed RS-232/422/485 communications ports and a 10 Base-T Ethernet port. The Ethernet port supports up to four protocols MODEL NO. DESCRIPTION PART NUMBER simultaneously, allowing dissimilar Ethernet based products to G307K2 7 TFT Operator Interface G307K200 communicate with one another. 1 The SD card slot can be used to load the unit s configuration file, SD SDxxxxxx SD Card allowing configuration changes to be made and saved to the card for 1 CBL CBLxxxxx Communications Cables and Adaptor later transfer. The G3 Kadet 2 range of HMIs is programmed with Red Lion s free G3FILM Protective Film G3FILM7K Crimson 3 software. Crimson offers easy to use drag and drop communications configuration, while the embedded image library allows 1 Contact your Red Lion distributor or visit our website for selection of SD the programmer to create intuitive screens and prompts for the operator. cards, adapters and cables. SAFETYSUMMARY Note: If replacing Model G306K000, see Tech Note TNG3K6. All safety related regulations, local codes and instructions that appear in the manual or on equipment must be observed to ensure personal safety and to prevent damage to either the instrument or equipment connected to it. If equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. Do not use the controller to directly command motors, valves, or other actuators not equipped with safeguards. To do so can be potentially harmful to persons or equipment in the event of a fault to the unit. CAUTION: Risk Of Danger. CAUTION: Risk of electric shock. Read complete instructions prior to installation and operation of the unit. -1-Released 2015-11-23 Bulletin No. G307K2-F Drawing No. LP0889 1. POWER REQUIREMENTS: Serial Ports: Format and Baud Rates for each port are individually Must use Class 2 or SELV rated power supply. software programmable up to 115,200 baud. Power connection via removable three position terminal block. Ethernet Port: 10/100 Mbps Supply Voltage:24 VDC 20%, Class 2 7. ENVIRONMENTAL CONDITIONS: Maximum Power:250 mA 24 VDC Operating Temperature Range: 0 to 45C Fuse:Fast-blow 800 mA, 5x20 mm Operating and Storage Humidity: 10-90% relative humidity (non- 2. BATTERY: Lithium coin cell. Typical lifetime of 10 years. condensing) from -20 to 60C. 3. LCD DISPLAY: Vibration: Operational 10 to 25 Hz, in X, Y, Z direction, 30 minutes, 2 g. 8. CERTIFICATIONS AND COMPLIANCES: SIZE 7-INCH SAFETY TYPE TFT UL Listed, File E302106, UL508 COLORS 32K UL Type 4 Indoor Use Only Enclosure rating (Face only), UL50 PIXELS 800 X 480 IP65 Enclosure rating (Face only), IEC 529 2 ELECTROMAGNETIC COMPATIBILITY BRIGHTNESS 375 cd/m Consult factory for EMC specifications BACKLIGHT TYPE LED 9. CONNECTIONS: Compression cage-clamp terminal block. BACKLIGHT LIFE 30,000 HR TYP. Wire Gage: 12-28 AWG copper wire 4. TOUCHSCREEN: Four-wire resistive analog Communications: DB9 connectors 5. MEMORY: 10. CONSTRUCTION: Plastic enclosure with Type 4/IP65 front panel On Board User Memory: 128 Mbyte of non-volatile Flash memory. when properly installed. Memory Card: SD slot accepts standard capacity cards up to 2 Gbyte. 11. WEIGHT: 30 oz. (850 g) 6. COMMUNICATIONS: Three Serial Ports - One RS-232 port, two RS- 232/422/485: One Ethernet Port DIMENSIONS In inches (mm) 7.888 (200.35) 7.476 (189.9) 1.675 (42.55) COM CPU PWR 5.762 5.350 (146.35) (135.9) VESA Mount: VESA 75 (75 mm x 75 mm). Use four screws (M4-0.7 mm) less than 8 mm long. INSTALLINGANDPOWERINGTHEG307K2 MOUNTINGINSTRUCTIONS 7.56 (192) The unit can be mounted into enclosures with a depth of 4 . It is recommended that the unit be mounted on the front panel of a steel enclosure. Allow clearance of 1 around the sides of the unit for the mounting hardware. Allow 2.5 along the bottom edge if using Red Lion R.08 (R2) communication cables. Place the unit in the panel cutout. Slide clamps into the four holes provided at the top and bottom of the case. Tighten the clamping screws in an even pattern until the unit is secured in the panel. Caution: Do not over tighten the clamps. To seal to Type 4 specifications, all supplied mounting 5.43 (138) clamps must be used. (Torque is 2.6 3.5 in/lb.) The panel must not flex more than 0.010 . -2-