Copyright, RF Digital 
RFDP8 RFDP8
7/10/2011 1:40 AM  
RF Module RFDANT 
 
Patents Pending 
RFD21733 RFD21742
 
RoHS   CE  ESTI 
RFD21735 RFD21743
13715 Alton Pkwy  Irvine  CA  92618 
RFD21733  FCC  IC 
RFD21737 RFD21772
Tel: 949.610.0008  www.RFdigital.com 
RFD21743  FCC 
RFD21738 RFD21773
RFD21739 KEYFOBs
Approved & Certified Fast Answers: support@rfdigital.com 
 
Compliance Approved 2.4 GHz RF Transceiver Modules 
with Built-In RFDP8 Application Protocol 
 
Complete Compliance Approved & Certified, READY-TO-USE, 2.4 GHz wireless solution with built-in RFDP8 
interference-tolerant user application protocol.  Includes RFID, 32 Bit ESN, Logic Switch Transmitter / Receiver, 
 
9600-8N1 Serial UART Transceiver and many easy-to-use addressable network modes.  No development required at 
 
all, no RF layout, no code writing, all features are built-in.  Be up and running with a wireless solution in minutes.
 
 
 
RFD21735
 RFD21733   IC & FCC APPROVED
Optional Configuration
 
 
CE  ESTI TESTED & COMPLIANT  Easy to solder 0.050 Inch SMT pads
 
 
 
 
 
 
CE  ESTI
 For use with any 
External Antenna
 
 
 
 
15mm x 15mm 
 
 KEYFOBs & RFID
(0.600 x 0.600 Inch) 
500 Foot Range 
 
 
IC  FCC APPROVED
 
 
CE  ETSI Compliant
 
RFDANT  RFD21743 FCC APPROVED Standard & Custom 
 
  
Simple CE  ESTI TESTED & COMPLIANT 
 
 
Drill Hole  
Complete 
 
Mount 
RADIO
 
 
 
INSIDE
 
 
Antenna
  rw 
Use any plastic or metal 
 
Standard RFDP8 Interface 
enclosure. 
 
 
 
 
 
 
 
 
 
No Need for RF cables. 
 
Only +3V  GND  Data. 
 
1.5mm 11pin Connector. 
 
Fits onto any PCB. 
 
SMT or Through Hole. 
 
Patents 
 
Pending 
 
 2,000 FOOT ULTRA LONG RANGE 
 
Free Applications Support  Email your application questions to support@rfdigital.com 
1 
 Copyright, RF Digital 
RFDP8 RFDP8
7/10/2011 1:40 AM  
RF Module RFDANT 
 
Patents Pending 
RFD21733 RFD21742
 
RoHS   CE  ESTI 
RFD21735 RFD21743
13715 Alton Pkwy  Irvine  CA  92618 
RFD21733  FCC  IC 
RFD21737 RFD21772
Tel: 949.610.0008  www.RFdigital.com 
RFD21743  FCC 
RFD21738 RFD21773
RFD21739 KEYFOBs
Approved & Certified Fast Answers: support@rfdigital.com 
 
 
 
KEYFOBs
 
 
The RFD21733 Module with its RFID interval factory set to 30 seconds is inside of a KEYFOB 
 
enclosure with a CR2032 battery.  The reference layout for this device is available through 
 support@rfdigital.com if you want to build it yourself.  However if you wish to purchase the 
ready-made  KEYFOBs from RF Digital they are available, part numbers shown below. 
 
 
 
There are two modes of use, one is in Active RFID mode were the KEYFOB automatically 
 
transmits its ESN once every 30 seconds.  The other mode of use is SWITCH transmitter, which 
 
is available in 1, 2 or 3 buttons.  The RFID versions also have 1, 2 or 3 buttons so they serve as 
 
an automatic RFID transmitter and in addition have the switch buttons in one KEYFOB. 
 
 
 
If you do not need the automatic Active RFID feature, just use the Switch Button KEYFOBs. 
 
 
 
 
  RFD21783 RFD21793 
 
 
3 Button Switch Keyfob 3 Button RFID Keyfob
 
Pressing button 1, 2 or 3 will cause the output 1, 2 
 
or 3 on the RFD21733 Module or RFD21743 / 
 
RFD21732 RFDANT to go high for the duration the 
 
button is pressed, when in one of the 4 switch 
 
modes.  If in Serial UART mode, then you will 
 
 
receive 1 byte representing which button is 
Rotatable Buttons 
  pressed or if RFID transmission and 4 more bytes 
 
 indicating the 32 bit unique ESN of the KEYFOB.
 
 
 
  RFD21782 RFD21792 
 
2 Button Switch Keyfob 2 Button RFID Keyfob
 
 
Pressing button 1 or 3 will cause the output 1 or 3 
 
on the RFD21733 Module or RFD21743 / RFD21732 
 RFDANT to go high for the duration the button is 
pressed, when in one of the 4 switch modes.  If in 
 
Serial UART mode, then you will receive 1 byte 
 
 
representing which button is pressed or if RFID 
 
Rotatable Buttons 
transmission and 4 more bytes indicating the 32 
 
bit unique ESN of the KEYFOB. 
 
 
 
  RFD21781 RFD21791 
 
 
 
1 Button Switch Keyfob 1 Button RFID Keyfob
 
Pressing button 2 will cause the output 2 on the 
 
RFD21733 Module or RFD21743 / RFD21732 
 
RFDANT to go high for the duration the button is 
 
pressed, when in one of the 4 switch modes.  If in 
 
Serial UART mode, then you will receive 1 byte 
 
 
representing which button is pressed or if RFID 
 
 
 
transmission and 4 more bytes indicating the 32 
 bit unique ESN of the KEYFOB. 
 
Free Applications Support  Email your application questions to support@rfdigital.com 
2