HMP2020 Rohde & Schwarz

Programmable Power Supplies 188 W 384 W HMP SeriesHMP Series The HMP Series Key facts Low residual ripple due to linear post-regulators Real-time voltage, current and watt values High setting and read-back resolution: 1 mV and 0.1 / 0.2 / 1.0 A (current output and model dependent) FuseLink (electronic fuse) freely combinable for all channels FuseDelay tunable up to 250 ms EasyArb function directly programmable at the device PC software (free of charge) to easily generate user-defined waveforms Independently adjustable over-voltage protection (OVP) for each channel Advanced parallel- and serial operation through V/I tracking Front connectors: 4 mm safety sockets Rear connectors for all channels including SENSE RS-232/USB dual interface, remote control via SCPI based commands HMP series HMP4040 HMP4030 HMP2030 HMP2020 model overview: Output voltage per channel 0 V to 32 V Output current per channel 0 A to 10 A 0 A to 5 A 1 x 0 A to 10 A 1 x 0 A to 5 A Maximum output power 160 W 80 W 1 x 160 W per channel 1 x 80 W Total output power 384 W 188 W Channels 4 3 3 2 2 HAMEG INSTRUMENTS Series HMP