R&S HM8135

3 GHz RF-Synthesizer HM8135 Frequency range from 1 Hz to 3 GHz HO870 USB Interface Output power from -135 dBm to +13 dBm Frequency resolution 1 Hz (accuracy 0.5 ppm) Input for external time base (10 MHz) Modulation modes: AM, FM, Pulse, , FSK, PSK Internal modulation source Rapid pulse modulation: typ. 200 ns Internal modulator from 10 Hz to 200 kHz High spectral purity Internal modulation source OCXO optional RS-232 Interface optional: USB, IEEE-488Ext. frequency resp. (to - 1dB): 10 Hz to 100 kHz for AC 3 GHz RF-Synthesizer HM8135 2 % (AM-depth 60 %, fmod 1 kHz) Distortion: Valid at 23 C after a 30 minute warm-up period 6 % (AM-depth 80 %, fmod 20 kHz) Frequency modulation Frequency internal or external Source: Range: 1 Hz to 3 GHz Deviation: 200 Hz to 400 kHz Resolution: 1 Hz (depending on frequency band) Settling time: 10 ms Resolution: 100Hz Frequency Reference 10 MHz Accuracy: 3% + residual FM (fmod 5 kHz) Standard: TCXO 7% + residual FM (5 kHz fmod 100 kHz) Stability (0 to 50C): 0.5 ppm Ext. frequency response: (to 1dB): Aging: 1 ppm/year DC coupling: 0 to 100 kHz Option: OCXO (HO85) 100 Hz to 100 kHz AC coupling: -8 Stability: 1x10 Distortion: 1 % for deviation 50 kHz at 1 kHz -8 Aging: 5x10 /year 3 % for deviation 10 kHz (rear panel) Internal reference output: Phase modulation Level: TTL Source: internal or external External reference input: (rear panel) Deviation: Level: 0 dBm 16 MHz: 0 to 3.14 rad Frequency: 10 MHz 20 ppm 16 MHz: 0 to 10 rad Spectral purity (without modulation) Resolution: 0.01 rad Harmonics: - 35 dBc (typ.) Accuracy: 5 % to 1 kHz + residual PM Non-harmonics: - 50 dBc ( 15 kHz from carrier) Ext. frequency response (to 1dB): - 50 dBc (typ.) Sub-harmonics: 0 to 100 kHz DC coupling: Phase noise: (at 20 kHz from carrier) AC coupling: 100 Hz to 100 kHz f 16 MHz: - 120 dBc/Hz Distortion: 3 % for fmod = 1 kHz and deviation = 10 rad - 95 dBc/Hz 16 MHz f 250 MHz: FSK modulation 250 MHz f 500 MHz: - 105 dBc/Hz Range (F0 F1): 16 to 3000 MHz 500 MHz f 1000 MHz: - 100 dBc/Hz Mode: 2 FSK levels 1 GHz f 2 GHz: - 95 dBc/Hz Data source: external 2 GHz f 3 GHz: - 90 dBc/Hz Max. rate: 10 kbit/s Residual FM: typ. 4 Hz 6.5 Hz (in 0.3 - 3 kHz bandwidth) Shift (F1 F0): 0 to 10 MHz Residual AM: typ. 0.06 % (in 0.03 - 20 kHz bandwidth) Resolution: 100 Hz Accuracy: see under FM PSK modulation Mode: 2 PSK levels Data source: external 10 kbit/s Max. rate: Shift (Ph1 Ph0): 16 MHz: 0 to 3.14 rad 0 to 10 rad 16 MHz: Resolution: 0.01 rad Accuracy: see under PM Pulse modulation Source: external (rear panel) Dynamic range: f 2 GHz: 80dB (Typical phase noise at 1 GHz) f 2 GHz: 55dB Output level 50 ns (typ. 10 ns) Rise/fall times: Range: -135 to +13 dBm Delay: 100 ns Resolution: 0.1 dB Max. frequency: 2.5 MHz (typ. 5 MHz) Precision f 1.5 GHz level - 120 dBm TTL Input level: for level - 57 dBm: 0.5 dB Sweep mode for level - 57 dBm: (0.5 dB + (0.2 x (-57 dBm level))/10) Range: 1 MHz to 3000 MHz Precision f 1.5 GHz level - 120 dBm Depth: 500 Hz to 2999 MHz for level - 57 dBm: 0.7 dB Sweep time: 20 ms to 5 s for level - 57 dBm: (0.7 dB + (0.5 x (-57 dBm level))/10) Trigger: internal Impedance: 50 Protective functions V.S.W.R.: The synthesizer is protected against reverse power applied on RF output f 1 GHz: 1.5 up to 1 W for a 50 source and against any DC source up to 7 V. The f 1 GHz: 2.5 protection disconnects the output until manually rearmed by operator. Modulation sources Miscellaneous 10 Hz - 200 kHz sine wave Internal: RS-232 (standard), IEEE-488 (optional), Interfaces: 10 Hz - 20 kHz square wave, triangle, sawtooth USB (optional) Resolution: 10 Hz Configuration memories: 10 External: (input on front panel) Safety class: Safety Class I (EN61010-1) Impedance: 10 k II 50 pf Power supply: 115/230V 10%, 50/60Hz Input level: 2 Vpp for full scale Power consumption: approx. 40 VA Coupling: AC or DC Operating temperature: + 10 to + 40 C Output: front panel Max. relative humidity: 10 to 90 % (without condensation) 2 Vpp Level: 285 x 75 x 365 mm Dimensions (W x H x D): Impedance: 1k Weight: approx. 5 kg Amplitude modulation (Level + 7 dBm) internal or external Source: AM-depth: 0 to 100 % Accessories supplied: Operators manual, power cable Resolution: 0.1 % Optional accessories: HZ33/HZ34 Test Cable 50 (BNC-BNC), HZ21 Adapter Accuracy: 4 % displayed rate 0.5 % plug, HZ42 19 Rackmount kit 2RU, HO870 USB Interface, HO880 IEEE-488 Interface, HO890 RS-232 Interface, HO85 OCXO (Installation only ex factory) (AM-depth 80 %, fmod 50 kHz) HM8135E/311007/ce Subject to alterations HAMEG Instruments GmbH Registered Trademark DQS-certified in accordance with DIN EN ISO 9001:2000, Reg.-No.: DE-071040 QM HAMEG Instruments GmbH Industriestr. 6 D-63533 Mainhausen Tel +49 (0) 6182 800 0 Fax +49 (0) 6182 800 100 www.hameg.com info hameg.com A Rohde & Schwarz Company