BA30E00WHFP-TR

Datasheet Dual-Output (Fixed/Variable) LDO Regulators BA3259HFP BA30E00WHFP General Description The BA3259HFP and BA30E00WHFP are 2-output, low-saturation regulators. These units have both a 3.3 V fixed output as well as a variable output with a voltage accuracy of 2%, and incorporate an overcurrent protection circuit to prevent IC destruction due to output shorting along with a TSD (Thermal Shut Down) circuit to protect the IC from thermal destruction caused by overloading. Features Packages W (Typ.) x D (Typ.) x H (Max.) Output voltage accuracy: 2%. HRP5 9.395mm x 10.54mm x 2.005mm Reference voltage accuracy: 2% HRP7 9.395mm x 10.54mm x 2.005mm Ceramic capacitor can be used to prevent output oscillation (BA3259HFP) Low dissipation with two voltage input supported (BA30E00WHFP) Built-in thermal shutdown circuit Built-in overcurrent protection circuit Key Specifications Input Power Supply Voltage: BA3259HFP 14.0V(Max.) BA30E00WHFP 16.0V(Max.) Output Voltage type: V1 Fixed O HRP5 HRP7 V2 Variable O Output Current: BA3259HFP 1A (MAX) BA30E00WHFP 0.6A (MAX) Operating temperature range: BA3259HFP 0 to 85 BA30E00WHFP 25 to 105 Applications Available to all commercial devices, such as FPD, TV, and PC sets besides DSP power supplies for DVD and CD sets. Ordering Information B A 3 x x x H F P - TR Part Number Package Packaging and forming specification HFP:HRP5 TR: Embossed tape and reel HRP7 Lineup Maximum Output Current Output Voltage 1 Output Voltage 2 Package Orderable Part Number (Max.) (Typ.) (Typ.) 1.0A 3.3V 0.8 to 3.3V HRP5 Reel of 2000 BA3259HFP-TR 0.6A 3.3V 0.8 to 3.3V HRP7 Reel of 2000 BA30E00WHFP-TR Product structureSilicon monolithic integrated circuit This product is not designed protection against radioactive rays. www.rohm.com TSZ02201-0R6R0A600100-1-2 2012 ROHM Co., Ltd. All rights reserved. 1/16 TSZ2211114001 26.Jun.2012 Rev.001Datasheet BA3259HFP BA30E00WHFP Block Diagrams / Standard Example Application Circuits / Pin Configurations / Pin Descriptions GND(Fin) Vcc1 Vcc1 V O1 3.3V Reference 5 Current Voltage C O1 Limit Current 1 F Limit Sat. Prevention V O2 1.5V Vcc2 Vcc2 4 Current C Limit O2 GND Thermal GND Current 3 1 F Shut Down Thermal FIN Limit Sat. Shutdown R2 Prevention ADJ 2 R1 Vcc V IN V 1 2 3 4 5 6 7 REF 1 EN Vcc2 Vcc1 GND Vo1 Vo2 ADJ C IN 1 F 1 F 47F 47 F R2 R1 3.3 F Fig.1 BA3259HFP Block Diagram Fig.2 BA30E00WHFP Block Diagram Pin Pin Pin Pin Function Function No. name No. name 1 V Power supply pin 1 EN Output on/off control pin: High active CC 2 ADJ Variable output voltage detection pin 2 Vcc2 Power supply pin 2 3 GND GND pin 3 Vcc1 Power supply pin 1 4 Vo2 Variable output pin 4 GND GND pin 5 Vo1 3.3 V output pin 5 Vo1 Power supply pin for 3.3 V output Variable output voltage detection pin FIN GND GND pin 6 Vo2 (0.8 V to 3.3 V) 7 ADJ Variable output voltage detection pin FIN GND GND pin TOP VIEW TOP VIEW External capacitor External capacitor PIN PIN setting range setting range Vcc1 (3Pin) Approximately 1 F Vcc (1Pin) Approximately 3.3F Vcc2 (2Pin) Approximately 1 F Vo1 (5Pin) 1 F to 1000 F Vo1 (5Pin) 47 F to 1000 F Vo2 (4Pin) 1 F to 1000 F 1 2 3 4 5 Vo2 (6Pin) 47 F to 1000 F 1 2 3 4 5 6 7 HRP5 HRP7 Absolute Maximum Ratings BA3259HFP BA30E00WHFP Parameter Symbol Ratings Units Parameter Symbol Ratings Units *1 *1 Applied voltage Vcc 15 V Applied voltage Vcc 18 V *2 *2 Power dissipation Pd 2300 mW Power dissipation Pd 2300 mW Operating Operating Topr 0 to 85 Topr 25 to 105 temperature range temperature range Ambient storage Ambient storage Tstg 55 to 150 Tstg 55 to 150 temperature range temperature range Maximum junction Maximum junction Tjmax 150 Tjmax 150 temperature temperature *1 Must not exceed Pd. *2 Derated at 18.4 mW/ at Ta>25 when mounted on a glass epoxy board (70 mm 70 mm 1.6 mm). www.rohm.com TSZ02201-0R6R0A600100-1-2 2012 ROHM Co., Ltd. All rights reserved. 2/16 TSZ2211115001 26.Jun.2012 Rev.001