BD30HC0WEFJ-E2 ROHM

Datasheet 1A Fixed Output LDO Regulators BDxxHC0WEFJ General Description BDxxHC0WEFJ series devices are LDO regulators with an output current of 1.0A. The output accuracy is 1% of the output voltage. Various fixed output voltage devices that do not use external resistors are available. It can be used for a wide range of digital appliance applications. It has a small package type: HTSOP-J8 (4.90mm x 6.00mm x 1.00mm). These devices have built in over current protection to protect the device when output is shorted, 0A shutdown mode and thermal shutdown circuit to protect the device during over load conditions. These LDO regulators are usable with ceramic capacitors that enable a smaller layout and longer life. Features Package (Typ.) (Typ.) (Max.) +/-1% output voltage accuracy HTSOP-J8 4.90mm x 6.00 mm x 1.00mm Built-in Over Current Protection circuit (OCP) Built-in Thermal Shut Down circuit (TSD) Zero A shutdown mode Key Specifications Input Power Supply Voltage range: 4.5V to 8.0V Output voltage: 1.5V/1.8V/2.5V/3.0V/3.3V/5V/6V/7V Output current: 1.0A(Max.) Shutdown current: 0A(Typ.) Operating temperature range: -25 to +85 HTSOP-J8 Typical Application Circuit V V CC O C C IN OUT V O S EN GND FIN C ,C : Ceramic Capacitor IN OUT Product structureSilicon monolithic integrated circuit This product is not designed protection against radioactive rays. www.rohm.com TSZ02201-0R6R0A600330-1-2 2012 ROHM Co., Ltd. All rights reserved. 1/18 TSZ2211114001 28.Dec.2012 Rev.002Datasheet BDxxHC0WEFJ Ordering Information B D x x H C 0 W E F J - E 2 Part Output Input Output Shutdown Package Packaging and forming specification Number voltage voltage current mode range 15:1.5V H:10V C0:1.0A W:Included EFJ:HTSOP-J8 E2:Emboss tape reel 18:1.8V 25:2.5V 30:3.0V 33:3.3V 50:5.0V 60:6.0V 70:7.0V www.rohm.com TSZ02201-0R6R0A600330-1-2 2012 ROHM Co., Ltd. All rights reserved. 2/18 TSZ2211115001 28.Dec.2012 Rev.002