Datasheet Voltage Detector IC Series for Automotive Standard CMOS Voltage Detector IC BD48Exxx-M series BD49Exxx-M series General Description Key Specifications ROHMs BD48Exxx-M and BD49Exxx-M series are Detection voltage: 2.3V to 6.0V (Typ.), highly accurate, low current consumption Voltage 0.1V steps Detector IC series. The line up includes BD48xxx High accuracy detection voltage: 1.0% devices with N-channel open drain output and BD49xxx Ultra-low current consumption: 0.9A (Typ.) devices with CMOS output. The devices are available for Operating temperature range: -40C to +105C specific detection voltages ranging from 2.3V to 6.0V in increments of 0.1V. Package SSOP5: 2.90mm x 2.80mm x 1.25mm Features Applications High accuracy detection Circuits using microcontrollers or logic circuits that Ultra-low current consumption require a reset for automotive applications (car navigation, car audio, meter panel, exterior lamp etc.) Two output types (N-ch open drain and CMOS output) Wide Operating temperature range Very small and low height package Package SSOP5 is similar to SOT-23-5(JEDEC) AEC-Q100 Qualified Typical Application Circuit VDD1 V DD2 V DD1 R L Micro BD49Exxx-M R ST Micro Controller R ST BD48Exxx-M Controller L CL C Capacitor ( ( Capacitor for for noise filtering noise filtering GND GND (CMOS Output type (Open Drain Output type BD49Exxx-M series BD48Exxx-M series Product structureSilicon monolithic integrated circuit This product is not designed for protection against radioactive rays . www.rohm.com TSZ02201-0R7R0G300070-1-2 2013 ROHM Co., Ltd. All rights reserved. 1/17 TSZ22111 14 001 25.Nov.2020 Rev.005DatasheetDatasheet BD48Exxx-M series BD49Exxx-M series Connection Diagram N.C. N.C. SSOP5 Marking Lot. No VOUT VDD GND TOP VIEW Pin Descriptions SSOP5 PIN No. Symbol Function 1 VOUT Reset Output 2 VDD Power Supply Voltage 3 GND GND 4 N.C. Unconnected Terminal 5 N.C. Unconnected Terminal Ordering Information BD x x Ex x x - M T R Part Output Type Reset Voltage Value Package Product Category Packaging and Number 48 : Open Drain 23 : 2.3V G : SSOP5 M : Automotive Category forming specification 49 : CMOS 0.1V step TR : Embossed tape 60 : 6.0V and reel SSOP5 <Tape and Reel information> 2.90.2 + 6 4 Tape Embossed carrier tape 4 5 4 Quantity 3000pcs TR Direction The direction is the 1pin of product is at the upper right when you hold of feed () reel on the left hand and you pull out the tape on the right hand 12 3 1pin +0.05 0.13 0.03 +0.05 0.42 0.04 0.95 0.1 Direction of feed Reel (Unit : mm) Order quantity needs to be multiple of the minimum quantity. www.rohm.com TSZ02201-0R7R0G300070-1-2 2013 ROHM Co., Ltd. All rights reserved. 2/14 TSZ22111 15 001 25.Nov.2020 Rev.005 1.25Max. 2.80.2 1.10.05 +0.2 1.6 0.1 0.050.05 0.2Min.