Primary lithium battery LS 14250 3.6 V Primary lithium-thionyl chloride (Li-SOCl ) 2 High energy density 1 2AA-size bobbin cell Benefits 1 1 2 2 Cell size references R6 AA High voltage, stable during most of the applications lifetime Electrical characteristics Wide operating temperature range (typical values relative to cells stored for one year or less at +30 C max.) Low self-discharge rate Nominal capacity 1.20 Ah (less than 1 % per year of (at 1 mA +20C 2.0 V cut-off. The capacity restored by the cell varies storage at +20C) according to current drain, temperature and cut-off) Easy integration into compact Open circuit voltage (at +20 C) 3.67 V systems Nominal voltage (at 0.1 mA +20C) 3.6 V Superior resistance to atmospheric corrosion Pulse capability : Typically up to 100 mA (100 mA/0.1 second pulses, drained every 2 mn at +20C from undischarged cells with 10 A base current, yield voltage readings above 3.0 V. The readings may vary according Key features to the pulse characteristics, the temperature, and the cell s previous history. Fitting the cell with a capacitor may be recommended in severe conditions. Stainless steel container Consult Saft) and end caps Maximum recommended continuous current 35 mA (low magnetic signature) (Higher currents are possible, consult Saft) Hermetic glass-to-metal sealing Storage (recommended) +30C(+86F) max Non-flammable electrolyte (for more severe conditions, consult Saft) Compliant with IEC 86-4 safety Operating temperature range -60C/+85C standard and IEC 60079-11 (Operation above ambient T may lead to reduced capacity and (-76F/+185F) intrinsic safety standard lower voltage readings at the beginning of pulses. Consult Saft) Underwriters Laboratories (UL) Component Recognition Physical characteristics (File Number MH 12609) Diameter (max) 14.65 mm (0.58 in) Non-restricted for transport Height (max) 24.8 mm (0.98 in) Main applications Typical weight 8.9 g (0.3 oz) Utility metering Li metal content approx. 0.3 g Automatic meter reading Available termination suffix Alarms and security devices CN, CNR radial tabs 2 PF, 3 PF, 3 PF RP, 4 PF radial pins Memory back-up CNA (AX) axial leads Computer real-time clocks FL flying leads ...etc. Tracking systems Automotive electronics Professional electronics March 2008Voltage plateau versus Current and Temperature (at mid-discharge) LS 14250 Current (mA) Typical discharge profiles at + 20C Dimensions in mm. Time (hours) Storage Restored Capacity versus Current and Temperature (2.0 V cut-off) 1300 The storage area should be 1200 clean, cool (preferably not 1100 exceeding +30 C), dry and 1000 ventilated. 900 800 700 Warning 600 Fire, explosion and burn hazard. 500 400 Do not recharge, short circuit, 300 crush, disassemble, heat above 200 100 C (212 F), incinerate, 100 or expose contents to water. 0 Do not solder directly to the cell Current (mA) (use tabbed cell versions instead). Doc. N 31072-2-0308 Saft Information in this document is subject to change without notice Specialty Battery Group and becomes contractual only after written confirmation by Saft. For more details on primary lithium technologies please refer to 12, rue Sadi Carnot o Primary Lithium Batteries Selector Guide Doc N 31048-2. 93170 Bagnolet - France Published by the Communications Department Tel.: +33 (0)1 49 93 19 18 Photo credit: Saft Fax: +33 (0)1 49 93 19 69 Societe anonyme au capital de 31 944 000 RCS Bobigny B 383 703 873 www.saftbatteries.com Produced by Arthur Associates Limited. Capacity (mAh) Cell voltage (V) Cell voltage (V)