Primary lithium battery LS 33600 3.6 V Primary lithium-thionyl chloride (Li-SOCl ) 2 High energy D-size bobbin cell Benefits Cell size references D l High voltage response, stable during most of the lifetime of the Electrical characteristics application (typical values relative to cells stored for one year or less at + 30C max.) l Wide operating temperature Nominal capacity 17.0 Ah range (-60C/85C) (at 5 mA + 20C 2.0 V cut-off. The capacity restored by the cell varies l Easy integration in compact according to current drain, temperature and cut-off) system Open circuit voltage (at + 20C) 3.67 V l Low self-discharge rate Nominal voltage (at 0.7 mA + 20C) 3.6 V (less than 1 % after 1 year of Nominal energy 61.2 Wh storage at + 20C) Pulse capability: Typically up to 400 mA (400 mA/0.1 second pulses, drained every 2 mn at + 20C from undischarged cells with 10 A Key features base current, yield voltage readings above 3.0 V. The readings may vary according to the pulse l Stainless steel container characteristics, the temperature, and the cells previous history. Fitting the cell with a capacitor may be recommended in severe conditions. Consult Saft) l Hermetic glass-to-metal sealing Maximum recommended continuous current 250 mA l Built-in safety vent (to maintain cell heating within safe limits. Battery packs may imply lower l Finish with or without flat level of maximum current and may request specific thermal protection. positive end Consult Saft) l Non-flammable electrolyte Storage (recommended) + 30C (+ 86F) max l Compliant with IEC 60086-4 (for more severe conditions, consult Saft) safety standard and Operating temperature range - 60C/+ 85C IEC 60079-11 intrinsic safety (Operation above ambient T may lead to reduced capacity and (- 76F/+ 185F) standard lower voltage readings at the beginning of pulses. Consult Saft) l Underwriters Laboratories (UL) Physical characteristics Component Recognition Diameter (max) 33.4 mm (1.32 in) (File Number MH 12609) l Restricted for transport (Class 9) Height (max) 60.2 or 61.6 mm (2.37 in or 2.42 in) depending on finish type Main applications Typical weight 90 g (3.2 oz) l Utility metering Li metal content approx. 4.5 g l Automatic meter readers Available termination suffix l Buoys CN, CNR radial tabs l Measuring equipment CNA (AX) axial leads l Industrial applications FL flying leads... etc. l Professional electronics l Marine equipment Optional upon request l Low magnetic version July 2010- 20C - 20C - 20C Voltage plateau versus Current and Temperature (at mid-discharge) LS 33600 3.6 3.6 3.5 3.6 3.5 33.1 0.3 3.4 3.5 3.4 9.3 0.1 33.1 0.3 (on flat surface) 3.3 3.4 + 55C 3.3 + 55C 9.3 0.1 3.2 3.3 3.2 (on flat surface) + 55C 3.1 3.2 3.1 2.1 0.2 3.0 3.1 3.0 2.1 0.2 2.9 3.0 2.9 - 20C - 20C 2.8 2.9 2.8 - 20C 61.0 0.6 2.7 2.8 2.7 + 20C + 20C 2.6 2.7 - 40C 61.0 0.6 2.6 - 40C + 20C 2.5 2.6 2.5 - 40C 2.5 0.1 1 1 10 100 1000 0.5 0.1 1 1 10 100 1000 0.1 1 1 10 100 1000 0.5 Current (mA) 18.0 0.2 (on flat surface) 18.0 0.2 (on flat surface) Typical discharge profiles at + 20C Finished version with protruding positive end cap 3.5 3.5 33.1 0.3 3.53.3 3.3 13.8 0.2 (on flat surface) 3.3 33.1 0.3 3.1 3.1 13.8 0.2 3.1 2.9 (on flat surface) 2.9 2.9 2.7 0.6 0.2 2.7 2.72.5 2.5 0.6 0.2 2.5 2.3 2.3 59.6 0.6 2.32.1 2.1 2.1 59.6 0.6 1.9 1.9 1.91.7 1.7 0.5 1.70.1 1 10 100 1000 10000 0.1 1 10 100 1000 10000 0.1 1 10 100 1000 10000 0.5 Time (hours) 18.0 0.2 (on flat surface) 18.0 0.2 (on flat surface) Finished version with Restored Capacity versus Current and Temperature (2.0 V cut-off) flat positive end cap 16.0 Dimensions in mm. 16.0 16.0 14.0 14.0 14.0 Storage 12.0 12.0 12.0 The storage area should be clean, 10.0 10.0 cool (preferably not exceeding 10.0 + 20C 8.0 + 20C 8.0 + 30C), dry and ventilated. + 20C 8.0 6.0 6.0 Warning 6.0 4.0 4.0 - 40C Fire, explosion and burn hazard. 4.0 - 40C 2.0 2.0 - 40C Do not recharge, short circuit, 2.0 0 0 crush, disassemble, heat above 0 0.1 1 10 100 1000 0.1 1 10 100 1000 100C (212F), incinerate, Current (mA) 0.1 1 10 100 1000 or expose contents to water. Do not solder directly to the cell (use tabbed cell versions instead). o Doc. N 31007-2-0710 Information in this document is subject to change without notice Saft and becomes contractual only after written confirmation by Saft. Specialty Battery Group For more details on primary lithium technologies please refer to o 12, rue Sadi Carnot Primary Lithium Batteries Selector Guide Doc N 31048-2. 93170 Bagnolet - France Published by the Communications Department. Tel.: +33 (0)1 49 93 19 18 Photo credit: Saft Socit anonyme au capital de 31 944 000 Fax: +33 (0)1 49 93 19 69 RCS Bobigny B 383 703 873 Produced by Arthur Associates Limited. www.saftbatteries.com Capacity (Ah) Cell voltage (V) Cell voltage (V) 15 Ohms/200 mA15 Ohms/200 mA15 Ohms/200 mA 30 Ohms/107 mA30 Ohms/107 mA30 Ohms/107 mA 515 Ohms/6.9 mA 515 Ohms/6.9 mA515 Ohms/6.9 mA 1000 Ohms/3.5 mA1000 Ohms/3.5 mA1000 Ohms/3.5 mA