1. C REPRESENTS A CRITICAL DIMENSION
REVISION CW
CLP-1XX-XX-XXX-D-XX
2. MINIMUM PUSHOUT FORCE: .5LB (8 OZ)
3. ONE POSITON WILL BE LOST FOR EVERY CUT MADE ON A
No OF POSITIONS PER ROW OPTION
SOCKET STRIP
-02 THRU -50 -P: PICK & PLACE PAD (USE LMP-01)
4. TUBE PACKAGE POSITIONS 5-50 ONLY. POSITIONS 2-4 ARE
(AVAILABLE ON POSITON -05 THRU -50 ONLY)
TO BE PLACED IN ANTISTATIC BUBBLE BAGS P/N ASBBLT4X5.5.
(NOT AVAILABLE WITH -PA OR -K OPTIONS)
DO NOT 5. SHEAR TAILS TO DIMENSIONS SHOWN
LEAD STYLE SPEC (SEE FIG 3, SHT 2)
C
SCALE FROM 6. PARTS TO BE SYMMETRICAL ABOUT WITHIN .0015[0.038].
L
-A: ALIGNMENT PIN (USE CLP-XX-D-XX)
-02: SURFACE MOUNT
THIS PRINT
7. ENDWALL AFTER CUTTING: .0185[0.470].0025[0.064]
(NOT AVAILABLE WITH -PA OPTION)
(USE C-106-X2-XXX)
8. VOID CORES MAY NOT BE PRESENT.
(SEE FIG 2, SHT 2)
(SEE NOTE 9)
9. HAND FILL USE C-106-01-XX.
-TR: TAPE AND REEL
C-106-02-XX CAN BE
AUTOMATION USE C-106-22-XX.
-BE: BOTTOM ENTRY ONLY (USE CLP-XX-DBE-XX)
SUBBED FOR C-106-22-XX.
-PA: PICK & PLACE PAD WITH ALIGNMENT PINS
C
C 10. MAX CUT FLASH: .010[0.27] WITH NO FLASH ALLOWED IN
(NOT AVAILABLE WITH -P, -A, OR -K OPTIONS)
.0100 0.254
HOLES OR EXTENDING BELOW LEADS. (SEE SHT 2, TABLE 3)(SEE NOTE 12)
.005 0.12
C
11. MAX BURR: .005[.13]. -K: POLYIMIDE FILM PAD (AVAILABLE ON -05 THRU -50
POSITIONS. USE K-DOT-.157-.250-.005, (SEE FIG 5, SHT 2)
12. ALL -PA OPTION PARTS SHIP IN EIA-960 TRAYS. (SEE NOTE 13)
(NOT AVAILABLE WITH -P OR -PA OPTIONS)
13. DOES NOT APPLY TO -BE END OPTION.
C
BODY SPEC
-D: DOUBLE ROW
(USE CLP-XX-D)
PLATING SPEC
DETAIL 'D'
-F: 3" FLASH SELECTIVE GOLD IN CONTACT AREA
SCALE 16 : 1
MATTE TIN ON TAIL
-L: 10" LIGHT SELECTIVE GOLD IN CONTACT AREA
No OF POS x .0500[1.270]) - .0500[1.270]
MATTE TIN ON TAIL
(TOLERANCE ACCUM .0020[0.051])
-S: 30" SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
C
.034 0.85 (No OF POS X .0500[1.270]) + .017[0.43].008[0.20] -G: 10" GOLD IN CONTACT AREA
3 ON TAIL
REF (SEE NOTE 3 AND 7)
-H: 30" HEAVY GOLD IN CONTACT AREA
3" ON TAIL
-LM: 10" LIGHT SELECTIVE GOLD IN CONTACT AREA
'D'
02
MATTE TIN ON TAIL
-FM: 3" FLASH SELECTIVE GOLD IN CONTACT AREA
.120 3.05
MATTE TIN ON TAIL
REF -SM: 30" SELECTIVE GOLD IN CONTACT AREA
MATTE TIN ON TAIL
01
-LTL: 10" LIGHT SELECTIVE GOLD IN CONTACT AREA
TIN/LEAD (90/10+/-5%) TAIL
-D -D-BE
CLP-XX-D-XX CLP-XX-DBE-XX
C
.050 1.27 REF
+.003 +0.08
.090 2.29
-.001 -0.03
(MEASURE AT BEND)
4
.084 2.12 REF
.004[[0.10] POS. 02-35
.006[0.15] POS. 36-50 C C
L L SECTION
-D -D-BE
.170.010 4.310.25 3
(-D-BE BODY: CLP-XX-DBE-XX)
(DIFFERENT AS SHOWN,
.016 0.41 x .005[0.13] REF
SECTION
OTHERWISE SAME AS -D BODY)
(-D BODY: CLP-XX-D-XX)
2.5 MAX SWAY
(TYP)
PROPRIETARY NOTE
* *
UNLESS OTHERWISE SPECIFIED,
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
C C-106-22-XXX DIMENSIONS ARE IN INCHES.
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
TOLERANCES ARE:
88 AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
.010 0.25
REF DECIMALS ANGLES
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
90
.012 0.30 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
.XX: .01 [.3] 2
520 PARK EAST BLVD, NEW ALBANY, IN 47150
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
.XXX: .005 [.13]
PHONE: 812-944-6733 FAX: 812-948-5047
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
.XXXX: .0020 [.051]
WRITTEN CONSENT OF SAMTEC, INC. e-Mail [email protected] code 55322
MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 3:1
DESCRIPTION:
-D-BE
-D
LOW PROFILE .050 x .050 DOUBLE ROW ASM
DWG. NO.
INSULATOR: LCP, UL 94 VO, COLOR: BLACK
IN-PROCESS
FIG 1 CONTACT: PHOS BRONZE CLP-1XX-XX-XXX-D-XX
SCALE 8:1
SHEET OF
BY: PURVIS 01/31/1994 1 3
F:\DWG\MISC\MKTG\CLP-1XX-XX-XXX-D-XX-MKT.SLDDRWAVAILABLE ON POSITIONS 05 THRU 50 ONLY
REVISION CW
NOTE: = USED MEASURED DIMENSION (REF)
= [ - .250[6.35])/2] .020[0.51]
C (SEE NOTE)
C 3.45
.100 2.54
(SEE NOTE)
.005 X 45 REF (TYP 4 SIDES)
.019 0.47
(No OF POS x .0500[1.270]) - .100[2.54] 22.86
LMP-01
.250 6.35 REF
.0070 0.178
FIG 2 FIG 3
REF (TYP)
-A: ALIGNMENT PIN -P: PICK AND PLACE PAD
.025 0.64 REF (TYP)
(3 POSITION MINIMUM) (AVAILABLE ON POSITION 05 THRU 50 ONLY)
.0100 0.254 REF (TYP)
(NOT AVAILABLE WITH -PA OPTION) (NOT AVAILABLE WITH -PA OR -K OPTIONS)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
.0050 0.127 REF (TYP)
C
.121 3.07
.051 1.30
C
(SEE NOTE)
.019.020 0.480.51
.035 0.89 REF
.325 8.26
REF
.095 2.41
C
C .275 6.99
(SEE NOTE)
PPP-38-X-X-XX
.1575.0050 4.0000.127
FIG 5
FIG 4
-K: POLYIMIDE FILM PAD
-PA: PICK & PLACE PAD WITH ALIGNMENT PINS (AVAILABLE ON POSITION 05 THRU 50 ONLY)
(NOT AVAILABLE WITH -P, -A OR -K OPTIONS) (NOT AVAILABLE WITH -P OR -PA OPTIONS)
NOTE: = USED MEASURED DIMENSION (REF)
= { - .1575[4.000])/2} .020[0.51]
PROPRIETARY NOTE
*
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
520 PARK EAST BLVD, NEW ALBANY, IN 47150
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
PHONE: 812-944-6733 FAX: 812-948-5047
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
e-Mail [email protected] code 55322
WRITTEN CONSENT OF SAMTEC, INC.
DESCRIPTION:
DO NOT SCALE DRAWING
LOW PROFILE .050 x .050 DOUBLE ROW ASM
DWG. NO.
SHEET SCALE: 4:1
CLP-1XX-XX-XXX-D-XX
SHEET OF
BY: PURVIS 01/31/1994 2 3
F:\DWG\MISC\MKTG\CLP-1XX-XX-XXX-D-XX-MKT.SLDDRW