DCA-17-03 Samtec

DESIGNED & DIMENSIONED REVISION E DCA-17-XX IN MILLIMETERS[INCHES] STYLE -01: PANEL MOUNT DUST CAP -02: CABLE DUST CAP -03: USB FLASH DRIVE COVER 16.35 .644 REF 1.20 .047 REF (SEE NOTE 3) 39.51 1.556 REF DO NOT SCALE FROM DCFS-17-01 THIS PRINT 7.50 .295 REF DC-17-01 125.00 4.921 REF FIG 1 DCA-17-01 SHOWN UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE DIMENSIONS ARE IN MILLIMETERS. THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO TOLERANCES ARE: SAMTEC, INC. AND SHALL NOT BE REPRODUCED DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR NOTES: DISCLOSED TO OTHERS OR USED FOR ANY .X: 0.3 [.01] 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS .XX: 0.13 [.005] PHONE: 812-944-6733 FAX: 812-948-5047 C OBTAINED WITHOUT THE EXPRESSED WRITTEN 1. REPRESENTS A CRITICAL DIMENSION. .XXX: 0.051 [.0020] CONSENT OF SAMTEC, INC. e-Mail: info@SAMTEC.com code: 55322 2. VENDOR TO ASSEMBLE PARTS. MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 1:1 DESCRIPTION: 3. COMPONENTS MUST BE PRESSED DOWN BELOW SNAPS. STRAP: LDPE DUST CAP ASSEMBLY 4. DCA-17-03 WILL ACCOMODATE USB DEVICE WITH DIMENSIONS 80.00mm X CAP: PA66 O-RING: SILICONE 13.30mm X 20.25mm. DWG. NO. 5. TORQUE SPECIFICATION FOR SCN-17-04 IS 12 IN-LB. DCA-17-XX 6. MIN BEND RADIUS: 6.00 [.24] BY: CHAD F 11/22/2004 SHEET OF1 3 F:\DWG\MISC\MKTG\DCA-17-XX-MKT.SLDDRWREVISION E 16.80 .661 REF (SEE NOTE 3) 39.50 1.555 REF DCFS-17-01 DC-17-02 FIG 2 DCA-17-02 SHOWN (SAME AS FIG 1, UNLESS OTHERWISE STATED) OR-17-01 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN e-Mail: info@SAMTEC.com code: 55322 CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING DUST CAP ASSEMBLY DWG. NO. SHEET SCALE: 1:1 DCA-17-XX F:\DWG\MISC\MKTG\DCA-17-XX-MKT.SLDDRW BY: CHAD F 11/22/2004 SHEET OF2 3