DESIGNED AND DIMENSIONED ERM8-XXX-XX.X-X-DV-XXXX-XX REVISION AK PACKAGING IN MILLIMETERS INCHES No OF POSITIONS (PER ROW) -TR: TAPE & REEL (SEE NOTES 4 & 7) -005, -010, -011, -013, -020, -025, -030, -TY: TRAY (SEE NOTE 7) C -035, -040, -049, -050, -060, -070, -075,-100 POSITION 1 REF OPTIONS (-100 AVAILABLE ON -09.0 LEAD STYLE ONLY DO NOT INDICATOR SEE NOTE 8) -K: POLYIMIDE FILM PAD SCALE FROM (USE K-DOT-.157-.250-.005) REF LEAD STYLE THIS PRINT -DS: DIFFERENTIAL PAIR (HOT SWAP) 01 59 -02.0 = 2mm (AVAILABLE ONLY ON -05.0 LEAD STYLE) -05.0 = 5mm (SEE TABLE 4 FOR POSITION AVAILABILITY) -08.0 = 8mm -L : LATCHES 3.25 .128 5.60 .220 -09.0 = 9mm (AVAILABLE ONLY ON -05.0) REF REF (SEE TABLE FOR AVAILABILITY)(SEE TABLE 3, SHT 2) ***-15.0 = 15mm (NOT AVAILABLE WITH -EGP & -EGPS PLATING SPECIFICATION OPTIONS) C 0.800 .031 02 -EGP: EXTENDED GUIDE POSTS -L: 10 LIGHT SELECTIVE GOLD 60 (AVAILABLE ONLY ON -05.0 LEAD STYLE) (TOL. NON-ACCUM) IN CONTACT AREA, (NOT AVAILABLE WITH -L OPTION) MATTE TIN ON TAIL -EGPS: EXTENDED GUIDE POST SHIELD -S: 30 SELECTIVE GOLD (AVAILABLE ONLY ON -05.0 LEAD STYLE) IN CONTACT AREA, (NOT AVAILABLE WITH -L OPTION) C MATTE TIN ON TAIL (-010, -020, -025, & -030 POSITIONS ONLY) -DSP: -DS OPTION WITH -EGP: (-13 & -25 POS ONLY) -DSS: -DS OPTION WITH -EGPS: (25 POS ONLY) ROW SPECIFICATION ERM8-XXX-XX.X-DV-01 1.10 .043 (SEE SHT 2, TABLE 3) -DV: DOUBLE VERTICAL REF ** = NOT RELEASED FOR PRODUCTION *** = NOT TOOLED 0.23 .009 REF 1.32 .052 REF C NOTES: 1.10 .043 3 MAX (SEE TABLE 8) 1. REPRESENTS A CRITICAL DIMENSION.C REF SWAY C L 2. BURR ALLOWANCE: 0.038 .0015 MAX. 3. MINIMUM PUSHOUT FORCE: TERMINAL 2.22 N .5 LB. , WELD TAB 4.45 N 1 LB. 4. FOR QUANTITY UP TO 49 PIECES, NO LEADER, TRAILER, OR C EIA-481-D REEL WILL BE SUPPLIED. FOR QUANTITY OF 50-124 L PIECES, NO LEADER OR TRAILER WILL BE SUPPLIED. 1.50 .059 5. DIMENSION DOES NOT APPLY TO -EGP & -EGPS OPTION, SEE FIG. 5 & 6. 1.32 .052 R 6. NOTE DELETED. REF C 0.800 .0315 (TYP) 7. -TR PACKAGING NOT AVAILABLE ON THE 100 POSITION -TY PACKAGING ONLY AVAILABLE ON -100 POSITION. (TOL. NON-ACCUM) 8. NOT AVAILABLE WITH -L, -EGP & -EGPS OPTIONS. DETAIL R REF SCALE 4 : 1 FIG 1 (ERM8-030-02.0-X-DV-XX SHOWN) (SOME CENTER FEATURES REMOVED FOR CLARITY) UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE DIMENSIONS ARE IN THIS DOCUMENT CONTAINS INFORMATION MILLIMETERS INCHES . CONFIDENTIAL AND PROPRIETARY TO TOLERANCES ARE: SAMTEC, INC. AND SHALL NOT BE REPRODUCED DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY X.X: 0.3 .01 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS X.XX: 0.13 .005 PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN X.XXX: 0.050 .0020 CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2:1 DESCRIPTION: INSULATOR: LCP, COLOR: BLACK 0.8MM EDGE RATE TERMINAL ASSEMBLY TERMINAL: PHOS BRONZE DWG. NO. LATCH: BeCu SHIELD: PHOS BRONZE ERM8-XXX-XX.X-X-DV-XXXX-XX F: DWG MISC MKTG ERM8-XXX-XX.X-X-DV-XXXX-XX-MKT.SLDDRW BY: KNOWLDEN 9/27/2005 SHEET OF1 6REVISION AK (SEE SHT 1, TABLE 6) +0.050 +.0020 0.65 .025 3.200 .1260 -A PIN VOID CORES -0.060 -.0024 C C L REF C (SEE TABLE 6) L T-1MXX-XX.X-X (SEE NOTE 5) (SEE TABLE 3) REF C (SEE SHT 1, TABLE 6) CORE SUPPORT SEE SHT1, TABLE 1 FEATURE PRESENT IN LAST 5 POSITIONS ON 1.07 .042 REF C EACH END (SEE SHT 1, TABLE 6) IN-PROCESS 1 0.9 .03 REF +0.18 +.007 4.67 .184 BOTTOM VIEW -0.13 -.005 (ERM8-030-09.0-X-DV-XX SHOWN) C SECTION (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) SCALE 4 : 1 3.20 .126 1.35 .053 REF REF SIGNAL SHORT PIN SIGNAL SHORT PIN (SIGNAL PINS) GROUND LONG PIN GROUND LONG PIN WT-XX-XX-X C (SEE TABLE 3) T-1M48-XX.X-X 2.10 .082 (SEE TABLE 3) C L C SECTION REF 0.62 .025 REF ERM8-XXX-XX.X-DV-L (SEE TABLE 3) (GROUND PINS) C L 0.64 .025 REF REF C 0.30 .012 2 MAX SWAY REF C (EITHER DIRECTION) FIG 3 C L REF -DS WITH -L OPTION (-DS AVAILABLE ON -05.0 LEADSTYLE ONLY) SECTION (-L AVAILABLE ON -05.0 LEAD STYLE ONLY) (ERM8-025-05.0-X-DV-DS-L SHOWN) (SAME AS FIG 1, EXCEPT AS SHOWN) (SOME CENTER FEATURES REMOVED FOR CLARITY) PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN e-Mail info SAMTEC.com code 55322 CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING 0.8MM EDGE RATE TERMINAL ASSEMBLY DWG. NO. SHEET SCALE: 2:1 ERM8-XXX-XX.X-X-DV-XXXX-XX KNOWLDEN BY: 9/27/2005 SHEET OF2 6 F: DWG MISC MKTG ERM8-XXX-XX.X-X-DV-XXXX-XX-MKT.SLDDRW