F-219 (Rev 22AUG19) ET60TD04308A04SR1S RIGHT-ANGLE POWER/SIGNAL HEADER Mates with: POWER ET60S ROWS SIGNAL POSITIONS ET60T POSITIONS (LEFT) SPECIFICATIONS For complete specifications and 0 00 recommended PCB layouts see www.samtec.com ET60T = No Signal = No Signal AXX = AC Power Positions Insulator Material: Black LCP (02, 03, 04, 05, 06) 3 08 Terminal Material: = 3 Rows = 3 Row only Signal: Phosphor Bronze DXX Power: Copper Alloy = DC Power Positions 5 01, 02, 03, 04, Plating: (02, 03, 04, 05, 06, 07, 08, 09, 10) = 5 Rows Au or Sn over 05, 06, 07, 08 50 (1.27 m) Ni = 5 Row only Current Rating: SXX* Power: 60 A per blade = Split Power (2 pins powered) Signal: 2.8 A per pin (6 pins powered) 000 Note: Operating Temp Range: = No Power SXX* & T* are Preliminary -40 C to +105 C Voltage Rating: B 280 VAC A (2.54) .100 C RoHS Compliant: Yes (10.00) .394 PROCESSING Lead-Free Solderable: (0.64) .025 SQ Yes A + B + C + (26.98) 1.062 (2.84) .112 A + B + C + (33.98) 1.338 RECOGNITIONS (1.27) (7.50) (5.50) For complete scope of .217 .050 .295 recognitions see www.samtec.com/quality (10.00) .394 (2.50) .098 (29.25) (24.90 FILE NO. E111594 1.152 .980 (9.40) .370 (5.00) .197 (3.33) CREEPAGE (5.17) (4.81) .1131 (3.00) (3.00) .118 .204 (5.50) .118 .189 DIA AND CLEARANCE .217 ET60TD03308A03XR1S D (2.00) A .079 C (10.00) .394 Selectively loading contacts achieves customer specific creepage and (0.64) .025 SQ clearance requirements. A + D + C + (27.21) 1.071 Contact asp samtec.com A + D + C + (34.21 ) 1.347 (5.50) (1.27) .050 .217 (24.45) Notes: .963 Some lengths, styles and options are non-standard, non-returnable. EXTreme Ten60Power is a trademark of Molex (5.50) .217 (5.64) .222 (4.57) .180 Incorporated and is dual ET60TD04503A04XR1S sourced by Molex Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.ET60TD04308A04LR1T ET60TD04503A04LR1S ET60TD04308000SR1S ET60T SERIES RIGHT-ANGLE POWER/SIGNAL HEADER POWER GUIDE OPTION PLATING TAIL POSITIONS (RIGHT) POST (Required callout) R1 H AXX L = Right-angle = Hot Swap = AC Power Positions = 10 (0.25 m) Gold on contact, S Through-hole (Leave blank for (02, 03, 04, 05, 06) Matte Tin on tail = Side (Use with no Hot Swap (Not available for 5 rows) Guide Post (1.60 mm) .062 DXX thick card) = DC Power Positions S T* (02, 03, 04, 05, 06, = 30 (0.76 m) Gold on contact, = Top 07, 08, 09, 10) Matte Tin on tail Guide Post SXX* = Split Power 000 = No Power Note: SXX* & T* are Preliminary A + D + C + (11.47) .452 POWER POWER A C POSITIONS POSITIONS DC AC D (LEFT) (RIGHT) (2.00) POWER POWER .079 (5.50) (7.50) 02 02 (14.98) .217 .295 .590 (11.00) (15.00) 03 03 .433 .591 (16.50) (22.50) 04 04 .650 .886 C A (0.64) .025 SQ A + D + C + (19.71) .776 (22.00) (30.00) 05 05 .866 1.181 ET60TD04503A04XR1T (27.50) (37.50) 06 06 1.083 1.476 (33.00) 07 07 N/A 1.299 (38.50) N/A 08 08 1.516 C A (44.00) 09 09 N/A 1.732 (49.50) 10 10 N/A 1.949 A + C + (21.50) .846 SIGNAL SIGNAL A + C + (28.50) 1.122 POSITIONS POSITIONS B D PER ROW PER ROW (3 Row) (5 Row) (1.27) (5.50) 01 N/A .050 .217 (2.00) 02 .079 (4.00) 03 (3.33) .157 .1131 (29.25) 1.152 (6.00) DIA 04 .236 (17.78) 08 .700 (8.00) 05 .315 (10.00) 06 .394 (5.50) (4.50) .177 (5.50) .217 .217 (12.00) 07 .472 (14.00) ET60TD04000A04XR1S 08 .551 Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.