F-208 FTMH12502LDV FTMH11602FDVES 1mm MICRO HEADERS FTMH SERIES Mates with: SPECIFICATIONS ALSO AVAILABLE CLM, MLE For complete speci cations and (1,27mm) rec om mend ed PCB layouts .050 see www.samtec.com FTMH OPTIONS Insulator Material: Ultra-low Black Liquid Crystal pro le P OPTION Polymer option ES OPTION Terminal Material: available. Phosphor Bronze End Shrouds Current Rating: available. Call 1.5A 80C ambient Operating Temp Range: for FTM Series -55C to +125C speci cations. Plating: Sn or Au over 50 (1,27m) Ni EC OPTION RoHS Compliant: APPLICATION Yes SPECIFIC OPTION Processing: End shrouds with EP OPTION Max Processing Temp: board locks available. 230C for 60 seconds, or TR OPTION Molded end shrouds available 260C for 20 seconds 3x for 05 through 08 positions. Lead-Free Solderable: Call Samtec. Yes -DV Lead Coplanarity: (0,10mm) .004 max -DH Lead Coplanarity: (0,10mm) .004 max (05-25) (0,15mm) .006 max (26-50) LEAD PLATING NO. PINS 1 FTMH STYLE OPTION PER ROW L 02 = 10 (0,25m) Gold on post, = (1,91) .075 Post Matte Tin on tail (Mates with MLE) 05 thru 50 F 03 = Gold ash on post, = (1,65) .065 Post Matte Tin on tail (Mates with CLM) No. of positions x (1,00) .03937 02 100 (3,17) .125 OPTION Z 01 99 LEAD (1,57) ES A .062 STYLE No. of positions (4,06) (1,91) x (1,00) .03937 + Z EC 02 .160 .075 (5,49) (1,65) 03 EP .216 .065 (1,00) (0,30) .012 SQ TYP A (5,00) .03937 .197 A (1,49) (1,80) .059 .071 (2,59) (5,21) .102 .205 Shrouded option removed for clarity DH OPTION DV OPTION Note: Some lengths, styles and options are non-standard, non-returnable. WWW.SAMTEC.COMFTMH11002LDVP FTMH12002FDVEC FTMH12802LDVEP FTMH13002LDVES Optional Pick & Place pads Low pro le (1,79mm) .071 Flex Shroud options available (1,00mm) .03937 Surface micro pitch Mount ROW OTHER FLEX SHROUD OPTIONS OPTION (DV only) 9 pins/row minimum OPTIONS ES DV EP A = End Shroud = Dual Vertical = End Shroud with Guide Post = Alignment Pin (Use only when mating with CLM) (3 positions minimum) Metal or plastic at Samtec discretion EC DH (DV only) = End Shroud with Locking Clip = Dual Horizontal K = (2,50mm) .098 DIA Polyimide Film Pick & Place Pad (DH only) (1,91) (3,18) .075 .125 DIA P X (3,10) = Plastic Pick & Place Pad (5,08) (4,32) .122 .200 (DV only) .170 (7 positions minimum) (3,18) .125 (3,84) .151 TR = Tape & Reel EP OPTION P OPTION ES OPTION (0,69) (1,22) .027 .048 (0,64) .025 DIA A OPTION EC OPTION WWW.SAMTEC.COM