SURFACE MOUNT MICRO HEADER 8 Gbps (1.27 mm) .050 PITCH FTSH SERIES FTSH NO. PINS LEAD PLATING TAIL FLEX SHROUD OTHER 1 OPTION FTSH Board Mates: - PER ROW- STYLE - OPTION - OPTION- - OPTIONS - OPTIONS CLP, FLE Cable Mates: Leave Blank (Style 02 & 03 02 01 F DV K FFSD, FFTP for -DH & only, DH & MT = (3.05 mm) = Gold flash = Double = Keying thru -MT not available) .120 Post on post, Vertical Shroud 9 pins/row 50 (Mates with Matte Tin (For mating SPECIFICATIONS minimum XXX FFSD) on tail with FFSD DH (Other positions = Polarized Style 01 only = Double Insulator Material: available. Call Position and 05, 08, 10, 02 L Horizontal Black Liquid Crystal Polymer Samtec.) (Specify 13, 15, 17, = (1.91 mm) = 10 (Styles Terminal Material: position 20 & 25 .075 Post (0.25 m) 01, 02 & Phosphor Bronze of ES pins/row only. (Mates with Gold 04 only) Plating: omitted = End Shroud 13, 17, 20 & 25 FLE) on post, Sn or Au over pin) pins/row only Matte Tin 50 (1.27 m) Ni MT (Not with EJ option) EC on tail Current Rating (FTSH/CLP): 03 = Mixed available (DV only) = End Shroud 3.4 A per pin = (1.65 mm) Technology with -EX with Locking Clip (2 pins powered) .065 Post (Styles options) (Manual A Operating Temp Range: (Mates with 01, 02 & placement = Alignment -55 C to +125 C CLPD) 04 only) required) Pin (DV 3 positions 04 minimum) EP PROCESSING = (3.81 mm) (DH 5 positions = End Shroud .150 Post minimum) with Guide Post Lead-Free Solderable: (Mates with (Metal or Yes CLP-DH) plastic at SMT Lead Coplanarity: EL Samtec MT & DV Tail Option: = End Shroud with 05 discretion) (0.10 mm) .004 max (02-25) Board Lock = (4.32 mm) MT & DH Tail Option: (Boards are .170 Post (0.15 mm) .006 max (26-50)* C positively locked (Mates with *(.004 stencil solution = (5.00 mm) OPTION Z and cannot be CLPBE) may be available contact .197 DIA unmated) ES (2.57) .101 IPG samtec.com) Polyimide film Pick & Place Pad No. of positions x (1.27) .050 + Z EJ EJ (15.77) .621 (DH only) = Ejector Shroud EC (3.33) .131 (Style 01 only) P DH & MT (4.78) ALSO AVAILABLE EP (5.87) .231 = Pick & not available .188 MOQ Required Place Pad 10 pins/row EL (6.53) .257 (DV 4 positions minimum Molded Pick & Place pads minimum) EX OPTION SHOWN 25 pins/row Latches (DH & MT maximum not available) Other platings No. of positions x (1.27) .050 + Z TR = Tape & Reel (Flex Shroud (5.64) LEAD A options .222 A STYLE not available (3.05) except ES 01 .120 & EJ) EJ OPTION SHOWN (1.91) 02 MT .075 FR (Styles 01, 02 & 04 only) = Full Reel (1.65) No. of positions x (1.27) .050 10 YEAR MFG 03 Tape & Reel .065 WITH 30 GOLD (must order (3.81) EXTENDED LIFE A A maximum 04 .150 PRODUCT quantity (2.92) per reel HIGH MATING (4.32) 05 CYCLES .115 contact .170 Samtec for DH DV quantity breaks) (Styles 01, 02, 04 only) Notes: Some sizes, styles and options are non-standard, non-returnable. ES EL EJ P EP K See SFM/TFM for positive A EC alignment feature. F-221 samtec.com FTSH Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Headers & Wire Housings category: Click to view products by Samtec manufacturer: Other Similar products are found below : 892-18-020-10-001101 58102-G61-06LF 582553-1 0009485154 009176003701906 0050291907 LY20-4P-DT1-P1E-BR 02.125.8002.8 609-3404 61062-3 61082-181009 622-3653LF 63453-116 636-1030 636-1427 636-3427 636-4007 641938-9 641991-4 644827-2 65817- 010LF 65817-015LF 65863-015LF 66207-023LF 67095-007LF 67601157 68645-018 68648-049 70.362.1628.0 70-4210 70-4226B 70- 4853B 707-5020 707-5028 71.350.2428.0 71918-208LF 71961-016LF 733-134 733-162 754199-000 760-3052 79531-3000 FCN- 360C032-B FCN-367T-T012/H FCN-723D010/2 80.063.4001.1 800-90-001-10-001000 800-90-010-10-002000 801-43-002-10-013000 801-43-006-10-002000