NOTES: FTSH-1XX-XX-XXX-DV-XXX REVISION ET C 1. REPRESENTS A CRITICAL DIMENSION. OPTIONS No OF POSITIONS 2. PARTS MAY BE CUT TO POSITION. -P: PICK & PLACE PAD (4 POS MIN) -02 THRU -50 3. MAXIMUM CUT FLASH: .015 0.38 , (SEE FIG 11, SHT 4 & TABLE 5) (PER ROW) LOOSE FLASH MUST BE REMOVED. -TR: TAPE & REEL PACKAGING 4. MINIMUM PUSHOUT FORCE: 1.0 LB. -ES: END SHROUDS (SEE FIG 6, SHT 3) LEAD STYLE 5. MEASURED AT BEND RADIUS, NOT AT END OF PIN. (MOLDED IN 5 POS MIN -02 & -03 LEAD STYLE ONLY) 6. TUBE ONLY -04 THROUGH -50 POSITIONS (SEE TABLE 2). -01: .120 3.05 DO NOT (SNAP SHROUDS 9 POS MIN -02 & -03 LEAD STYLE ONLY) 7. SHEAR TAILS TO DIMENSION SHOWN. -02: .075 1.91 SCALE FROM (MUST USE FTSH-50-D) 8. MAXIMUM BURR ALLOWANCE: .003 0.08 -03: .065 1.65 THIS PRINT -EJ: EJECTOR SHROUDS: SEE FIG 4, SHT 2) 9. GOLD PLATING TO BE ON POST, TIN PLATING TO BE ON TAIL. -04: .150 3.81 (10 POS MIN -01 LEAD STYLE ONLY)(MUST USE FTSH-50-D) 10. FILL WITH ALIGNMENT PIN HOLES TO TAIL SIDE. -05 .170 4.32 -EJM: EJECTOR SHROUDS WITH MOLDED ALIGNMENT PIN 11. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, LOCKING CLIPS -14: .150 3.81 (SEE FIG 5, SHT 2 10 POS MIN -01 LEAD STYLE ONLY) ARE NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS (NOT AVAILABLE WITH (NOT VALID WITH -A OPTION)(MUST USE FTSH-50-D) MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH LOCKING CLIPS. -SM, FM, LM PLATING OPTIONS) -EJC: EJECTOR SHROUDS WITH LOCKING CLIP 12. VOIDS MAY OR MAY NOT BE PRESENT ON POSITIONS 5 THRU 8 AND CAN (SEE FIG 5, SHT 2 & NOTE 11) BE MIXED WITHIN AN ORDER. PLATING SPECIFICATION (10 POS MIN -01 LEAD STYLE ONLY NOT VALID WITH -A 13. ON LEAD STYLES -01 THROUGH -04 THE T-1S15-03 CAN OPTION) BE SUBSTITUTED FOR T-1S15-14. -L: 10 SELECTIVE GOLD IN CONTACT AREA, (MUST USE FTSH-50-D) MATTE TIN ON TAIL C -EC: LOCKING CLIP (SEE FIG 7, SHT 3 & NOTE 11) -F: 3 SELECTIVE GOLD IN CONTACT AREA, +.005 +0.13 (9 POS MIN -02 & -03 LEAD STYLE ONLY)(MUST USE FTSH-50-D) MATTE TIN ON TAIL No OF POS x .0500 -.010 -0.25 -EP: GUIDE POST (SEE FIG 8, SHT 3 9 POS MIN -02 & -03 LEAD STYLE -S: 30 SELECTIVE GOLD IN CONTACT AREA, ONLY) MATTE TIN ON TAIL (USE ONLY WHEN MATING WITH CLP)(MUST USE FTSH-50-D) (No OF POS x .0500 1.27 ) - .050 1.27 -H: 30 GOLD IN CONTACT AREA, -EL: BOARD LOCK (SEE FIG 9, SHT 3) 3 GOLD ON TAIL (9 POS MIN -02 & -03 LEAD STYLE ONLY) 02 -LM: 10 SELECTIVE GOLD IN CONTACT AREA, 50 (USE ONLY WHEN MATING WITH CLP)(MUST USE FTSH-50-D) MATTE TIN ON TAIL -EPC: GUIDE POST & LOCKING CLIP -FM: 3 SELECTIVE GOLD IN CONTACT AREA, (SEE FIG 10, SHT 3 & NOTE 11 USE ONLY WHEN MATING WITH CLP) (9 POS MIN -02 & -03 LEAD STYLE ONLY NOT VALID MATTE TIN ON TAIL WITH -A OPTION)(MUST USE FTSH-50-D) -SM: 30 SELECTIVE GOLD IN CONTACT AREA, .135 3.43 -A: ALIGNMENT PIN (MOLDED OR STAKED SEE FIG 3, SHT 2) MATTE TIN ON TAIL REF (MOLDED: 3 POS MIN STAKED: 6 POS MIN) -LTL: 10 SELECTIVE GOLD IN CONTACT AREA, (SAMTEC DISCRETION ON WHICH -A PIN USED) TIN/LEAD (90/10+/-5%) TAIL (MUST USE FTSH-50-D) -G: 10 GOLD IN CONTACT AREA, -K: KEYING OPTION FOR MATING WITH FFSD 3 GOLD ON TAIL (SEE TABLE 3, SHT 2 05 THRU 25 AVAILABLE AS STANDARD) 49 01 TAIL OPTION (POSITION 13, 17, 20 & 25 AVAILABLE WITH -EJ OPTION) -DV: DOUBLE VERTICAL (LEAD STYLE -01 ONLY, SEE FIG 2, SHT 2 & NOTE 12) FTSHC-50-D 2 MAX SWAY (USE **FTSHC-1XX-XX-XXX-DV FOR ALL OPTIONS (ALIGNMENT PIN AVAILABLE WITH -K OPTION BUT MUST BE MOLDED) (EITHER DIRECTION) EXCEPT -ES, -EJ, -EJM, -EJC, -EC, -EP, -EL, -EPC, -A, (MUST USE FTSH-XX-CN-XX) THEN USE FTSH-50-D AND BUILD PER PRINT) -M: METAL PICK & PLACE PAD (5 POS MIN USE MPP-22-5) * ** = SEE FTSHC-1XX-XX-XXX-DX-XX PRINT FOR DETAILS (SEE FIG 12, SHT 4 NOT AVAILABLE WITH -K OPTION) * = NOT ENGINEERING APPROVED 2 MAX SWAY C (EITHER DIRECTION) .016 0.41 SQ 2 MAX SWAY .050.008 1.270.20 REF (TYP) (EITHER DIRECTION) SEE TABLE 1 C 903 CONTACT AREA C (SEE NOTE 9 & TABLE 1) +.005 +0.13 .099 2.51 .115 2.92 -.003 -0.08 REF (SEE NOTE 5) SEE NOTE 3 .004 .10 (2 PLCS) .23 5.8 .230 5.84 REF PATENT NUMBERS FIG 1 SEE NOTE 8 (SEE NOTE 7) HAND FILL USING T-1S40 FTSH-1XX-XX-XXX-DV SHOWN 5713755 / 5961339 (SEE FTSHC-1XX-XX-XXX-DX-XX PRINT FOR DETAILS) UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO TOLERANCES ARE: SAMTEC, INC. AND SHALL NOT BE REPRODUCED DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY .XX: .01 .3 1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS .XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN .XXXX: .0010 .025 CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 5:1 DESCRIPTION: .050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP INSULATOR: LCP UL 94 VO TERMINAL: PHOSPHOR BRONZE DWG. NO. FTSH-1XX-XX-XXX-DV-XXX * = SEE NOTE 13 BY: PURVIS 10/12/1995 SHEET OF1 5 F: DWG MISC MKTG FTSH-1XX-XX-XXX-DV-XXX-MKT.SLDDRWFIG 4 FIG 2 SCALE 2 : 1 REVISION ET -K OPTION -EJ OPTION (LEAD STYLE -01 ONLY) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) (-01 LEAD STYLE ONLY) (POSITION 13, 17, 20 & 25 AVAILABLE WITH -EJ OPTION) USE SUB-FTSH-EJEHA .222 5.65 ((No OF POS x .0500 1.270 ) (2 REQ D PER ASSEMBLY, EACH REF - .003 .08 ).006 0.15 USES 1 EHA-02 & 1 FTSH-EJ) 02 .135 3.43 .440 11.18 REF REF 01 (No OF POS x .050 1.27 )+.621 15.77 C L .085 2.16 REF .010 0.25 C .200 5.08 REF (No OF POS x .050 1.27 )+.772 19.61 REF .126 3.20 REF FTSH-50-D .392 9.96 REF FTSH-50-CN-XX SEE NOTE 12 -EJ OPTION (SHROUDS OPEN) .076 1.93 REF FIG 3 FIG 5 -A OPTION SCALE 2 : 1 (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) -EJC & -EJM OPTIONS (6 POSITION MINIMUM FOR STAKED ALIGNMENT PINS) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 4) (3 POSITION MINIMUM FOR MOLDED ALIGNMENT PINS) (-01 LEAD STYLE ONLY) C L USE SUB-FTSH-EJEHA-A USE SUB-FTSH-EJEHA FTSH-50-D (2 REQ D PER ASSEMBLY, EACH (2 REQ D PER ASSEMBLY, EACH (SEE NOTE 10) USES 1 EHA-02 & 1 FTSH-EJ-A) C C L USES 1 EHA-02 & 1 FTSH-EJ) L .034 0.86 C (No OF POS - 2) SM-A9H x .050 1.27 .035 0.89 REF C LC-05-TM 2 MAX SWAY .05 1.3 (EITHER DIRECTION) -EJM -EJC .035 0.89 (STAKED ALIGNMENT PINS) REF .010 0.25 REF C REF L -EJC -EJM +.005 +0.13 FTSH-50-D-XX .085 2.16 -.000 0.00 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION .034 0.86 CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 .050 1.27 REF PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN e-Mail info SAMTEC.com code 55322 CONSENT OF SAMTEC, INC. (No OF POS - 2) DESCRIPTION: x .050 1.27 .035 0.89 DO NOT SCALE DRAWING FULL R .050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP REF DWG. NO. (MOLDED ALIGNMENT PINS) SHEET SCALE: 3:1 FTSH-1XX-XX-XXX-DV-XXX F: DWG MISC MKTG FTSH-1XX-XX-XXX-DV-XXX-MKT.SLDDRW BY: PURVIS 10/12/1995 SHEET OF2 5