NOTES: REVISION CR FW-XX-XX-XX-D-XXX-XXX-XX PATENT NUMBERS 1. C REPRESENTS A CRITICAL DIMENSION. 5713755 / 5961339 2. MINIMUM PUSHOUT FORCE SHALL BE 1 LB. 3. GOLD AREA TO APPEAR ON POST. POSITION SPEC 4. TAILS TO BE SHEARED TO DIMENSION SHOWN. DO NOT No. OF POS PER ROW OPTION SCALE FROM (FOR HAND TOOLING ONLY) -02 THRU -50 -P: PICK & PLACE PAD (USE PPP-25) THIS PRINT 5. TO BE VALID ALL PART NUMBERS MUST MEET THE (USE PPP-25-NT WITH -TR ONLY) FOLLOWING PARAMETERS: THE BOARD SPACE (SEE FIG. 3, SHT 2)(5 POS. MIN) LEAD STYLE RANGE, POST HEIGHT MIN. AND BOARD + POST -TR: TAPE & REEL COMBINATION FOR EACH STYLE. -03: USE T-1S15-XX-X .740 18.80 MAX OVERALL HEIGHT AVAILABLE FOR -05: USE T-1S15-XX-X 6. MAXIMUM BURR: .003 0.08 ON CUT TAIL. -TR. MAX OVERALL HEIGHT = POST + BOARDSPACE (SEE TABLE 1) 7. MAXIMUM CUT FLASH TO BE .010 0.25 ON CRITICAL + PAD + ALIGNMENT PIN = .740 18.80 AREAS AS SHOWN. -ES: END SHROUDS (SEE FIG. 5, SHT 2) PLATING (9 POS PER ROW MIN) 8. AVAILABLE ONLY W/BOARD SPACE .215 5.46 -G: 10 GOLD IN CONTACT AREA, (MAX POST: .075 1.91 ) TOP .610 15.49 . 3 GOLD ON TAIL (SEE NOTE 8) 9. PARTS TO BE ASSEMBLED WITH ALIGNMENT HOLES -F: 3 SELECTIVE GOLD IN CONTACT AREA, -EP: GUIDE POST (FIG. 6, SHT 3) (IN BODY) FACING THE TAILS MATTE TIN ON TAIL (9 POS PER ROW MIN) 10. LOWER BODY MAY BE BLACK OR WHITE. -L: 10 SELECTIVE GOLD IN CONTACT AREA, (MAX POST: .075 1.91 ) 11. FILL BODY SO THAT THE LEAD IN OF THE CORE IS MATTE TIN TAIL (USE ONLY WHEN MATING WITH CLP) ON THE TAIL SIDE. -H: 30 GOLD IN CONTACT AREA, (SEE NOTE 8) -A: ALIGNMENT PIN (MOLDED OR STAKED, SAMTEC S 12. MAXIMUM HEIGHT VARIATION BETWEEN ROWS: .005 0.13 . 3 GOLD ON TAIL DISCRETION ON WHICH) -LM: 10 SELECTIVE GOLD IN CONTACT AREA, 13. FOR ADDED MECHANICAL STABILITY, SAMTEC (SEE FIG. 7 & 8 SHT 3) MATTE TIN TAIL RECOMMENDS MECHANICAL BOARD SPACERS (STAKED: 6 POS. MIN)(MOLDED: 3 POS. MIN) -FM: 3 SELECTIVE GOLD IN CONTACT AREA, BE USED IN APPLICATIONS WITH GOLD OR SELECTIVE (SEE NOTE 8) MATTE TIN ON TAIL GOLD PLATED CONNECTORS. CONTACT -S: 30 SELECTIVE GOLD IN CONTACT AREA, IPG SAMTEC.COM FOR MORE INFORMATION. POST HEIGHT (SEE NOTE 5) MATTE TIN ON TAIL 14. SUB-FW-50-03-XX-D-280-015 TO USE T-1S15-08, .065 1.65 MIN SUB-FW-50-05-XX-D-400-065 TO USE T-1S15-03. POST + BOARD SPACE = = -03: .150-.400 3.81-10.16 C (NO OF POSITIONS X .050 1.27 ) .010 0.25 *.401-.675 10.19-17.15 L -05: *150-.400 3.81-10.16 02 50 .401-.675 10.19-17.15 DOUBLE ROW (SEE TABLE 1 FOR BODY STYLE) BOARD SPACE OPTION (SEE NOTE 5) SEE TABLE 1 -03 LEAD STYLE (.085 2.16 MIN - .335 8.51 MAX) C .135 3.43 REF -05 LEAD STYLE (.248 6.30 MIN - .610 15.49 MAX) L MAX = - POST (SEE TABLE 1) * = FOR EXISTING CUSTOMERS ONLY .050 1.27 REF 01 49 SEE NOTE 7 .050 1.27 REF POST HEIGHT .070 1.78 REF .016 0.41 (SEE NOTE 12) 2 MAX SWAY (CONTACT AREA) SQ REF (TYP) (EITHER DIRECTION) .034 0.86 REF 904 C .005 0.13 FTS-XX-DV C (BOARD SPACE) T-1S15-XX-X 02-30POS. = .004 .010 +.005 +0.13 C .050 1.27 31-50 POS. = .006 0.15 -.000 0.00 SEE NOTE 7 C .229.010 5.820.25 (SEE NOTE 4) PROPRIETARY NOTE UNLESS OTHERWISE SPECIFIED, * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND FIG 1 DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR .XX: .01 0.3 5 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 0.13 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS .XXXX: .0020 0.051 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 4:1 DESCRIPTION: BODY: LCP, UL 94 VO, COLOR: FTS-50-DV & FTSH-50-D: BLACK .050 x .050 SURFACE MOUNT BOARD SPACERS FW-50-D: NATURAL DWG. NO. TERMINAL: PHOS BRONZE FW-XX-XX-XX-D-XXX-XXX-XX MAX FLASH ALLOWED: .002 0.05 MAX GATE VESTIGE: .002 0.05 BY: BRATCHER 11-03-1994 SHEET OF1 3 F: DWG MISC MKTG FW-XX-XX-XX-D-XXX-XXX-XX-MKT.SLDDRWIN-PROCESS 3 REVISION CR IN-PROCESS 2 IN-PROCESS 1 .248 6.30 - .610 15.49 .248 6.30 - .610 15.49 FTSH-XX-D .065 1.65 MIN (SEE NOTE 12) .065 1.65 MIN .065 1.65 MIN (SEE NOTE 12) (SEE NOTE 12) .099 2.51 REF (TYP) .099 2.51 .099 2.51 REF (TYP) REF (TYP) BOARD SPACE - .050 1.27 +.005 +0.13 .149 3.78 -.000 0.00 +.005 +0.13 C .115 2.92 -.001 -0.03 .125.010 3.180.25 (SEE NOTE 4) FTSH-XX-D .229.010 5.820.25 .229.010 5.820.25 T-1S15-03-X NOTE: SHEAR TAILS TO DIM SHOWN. FIG 4 DIFFERENT AS SHOWN, OTHERWISE THE SAME AS FIG 1 .215 5.46 - .335 8.51 No OF POSITIONS x .050 1.27 + .101 2.57 34.32 .008 .20 .065 1.65 MIN (SEE NOTE 12) .188 4.78 REF .099 2.51 REF (TYP) FTSH-XX-D .265 6.73 REF (TYP) ES-FTSH T-1S15-03-X .168 4.27 +.005 +0.13 .115 2.92 REF FW-XX-D -.000 0.00 +.005 +0.13 .115 2.92 -.000 0.00 FIG 5 SCALE 2:1 FIG 2 -ES OPTION (BKT MACHINE) DIFFERENT AS SHOWN, OTHERWISE THE SAME AS FIG 1 DIFFERENT AS SHOWN, OTHERWISE THE SAME AS FIG 1 9 POSITION MINIMUM (SEE NOTE 8) ((NO OF POS X .025 .635 - .100 2.54 ).010 .25 REF .200 5.08 REF .160 4.06 REF PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND .317 8.05 REF PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING .050 x .050 SURFACE MOUNT BOARD SPACERS SHOWN WITH LEAD STYLE -03 FIG 3 DWG. NO. SHEET SCALE: 4:1 (PICK AND PLACE PAD) FW-XX-XX-XX-D-XXX-XXX-XX (5 POSITION MINIMUM) F: DWG MISC MKTG FW-XX-XX-XX-D-XXX-XXX-XX-MKT.SLDDRW BY: BRATCHER 11-03-1994 SHEET OF2 3