(1.27 mm) .050 PITCH DISCRETE WIRE ASSEMBLY/COMPONENTS POSITIONS WIRE PLATING ASSEMBLED END END 2 SERIES - PER ROW - GAUGE - OPTION - LENGTH - OPTION - OPTION Requires SFSS 03, 04, 05, 28 G XX.XX S D or DR = Single Row = 28 AWG = 10 = Assembled = Single Ended 07, 10, 15, (End 1 Notch Up) PVC Cable (0.25 m) Length in Inches 20, 25, 40, 50 Gold on 28C D (76.20 mm) (Standard sizes) NUS contact, SFSST = Color = Double Ended 03.00 min. for = Notch up, Gold Flash = Single Row Coded Cable S end option straight on balance Blue *Teflon Cable (SFSS only) SR (82.60 mm) (Pin 1 to Pin N) = Single Ended 03.25 min. for 30 Retention Latch D end option NDS = 30 AWG (TFM-WT option 28C CABLE = Notch down, required for mating) COLOR CODING No. of Positions straight SFSS(T) x (1.27) .050 (Pin 1 to Pin 1) PIN COLOR + (0.53) .021 Board Mates: DR 1 BROWN = Double Ended TFM, TFC Retention Latch 2 RED (SR & DR requires (TFM-WT option 3 ORANGE WT option) required for mating) 4 YELLOW End 1 Notch (5.08) (Always Up) .200 5 GREEN 6 VIOLET SPECIFICATIONS 7 GRAY Insulator Material: 8 WHITE (11.18) Black LCP .440 9 BLACK Contact Material: BeCu 10 BLUE Plating: ETC REPEAT Au over 50 (1.27 m) Ni Assembled Current Rating: Length 2.9 A per pin (2 pins powered) (3.18) *DuPont Teflon is a Operating Temp Range: .125 registered trademark of the -10 C to +80 C (PVC) E.I. du Pont de Nemours -40 C to +125 C (*Teflon ) and Company or its affiliates. Voltage Rating: End 2 275 VAC (PVC) notch Notes: location 235 VAC (*Teflon ) Teflon cable is intended determined Wire: by part for crimp only. Contact 28 or 30 AWG number Samtec for solderable cable applications. DNUS SFSS OR SFSST SR For wiring option information refer to drawings on web. View complete specifications at: samtec.com SFSS & samtec.com SFSST POSITIONS ROW WIRE OPTION PLATING ISDF SERIES 01 - PER ROW - OPTION - - GAUGE - - 03, 04, 05, S M CC03R 2830 GF = Single = Metal = Contact, Full Reel = 28 to 30 = Gold flash 07, 10, 15, Row Retention (35,000 Parts per Reel) AWG contact 20, 25, 40, 50 Latch (Standard sizes) CC03M G = Contact, Mini Reel = 10 (0.25 m) No. of Positions x (1.27) .050 (1,000 - 5,000 Parts Gold on contact + (0.53) .021 per Reel) (5.08) .200 (15.37) .605 (11.18) .440 (3.81) (6.32) .150 .249 S M TOOLING Hand Tool: CAT-HT-203-2830-12 Mini Applicator: CAT-MC-203-2830-XX-01 Clamp for mounting hand tool: CAT-HT-MNT-01 Extraction Tool: CAT-EX-169-01 Note: Some lengths, styles and options are non-standard, View complete specifications at: samtec.com ISDF, samtec.com CC03R & samtec.com CC03M non-returnable. F-221 samtec.com/127mm-TigerEye Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Headers & Wire Housings category: Click to view products by Samtec manufacturer: Other Similar products are found below : 892-18-020-10-001101 58102-G61-06LF 582553-1 0009485154 009176003701906 0050291907 LY20-4P-DT1-P1E-BR 02.125.8002.8 609-3404 61062-3 61082-181009 622-3653LF 63453-116 636-1030 636-1427 636-3427 636-4007 641938-9 641991-4 644827-2 65817- 010LF 65817-015LF 65863-015LF 66207-023LF 67095-007LF 67601157 68645-018 68648-049 70.362.1628.0 70-4210 70-4226B 70- 4853B 707-5020 707-5028 71.350.2428.0 71918-208LF 71961-016LF 733-134 733-162 754199-000 760-3052 787-8014-00 79531-3000 FCN-360C032-B FCN-367T-T012/H FCN-723D010/2 80.063.4001.1 800-90-001-10-001000 800-90-010-10-002000 801-43-002-10-013000