MICRO EDGE CARD SYSTEMS 0.50 mm, 0.635 mm, 0.80 mm, 1.00 mm, 1.27 mm, 2.00 mm PITCH FEATURES & BENEFITS Up to 56 Gbps PAM4 PCI Express 4.0 (MEC5 Series) Solutions for .062 (1.60 mm), and .093 (2.36 mm) thick cards Choice of pitch: 0.50 mm, 0.635 mm, 0.80 mm, 1.00 mm, 1.27 mm, 2.00 mm Vertical, right-angle, edge mount Staggered press-fit tails Justification beam ensures (MEC8-VP) card and body are flushed Available in surface mount and through-hole (MEC5) KEY SPECIFICATIONS TOTAL INSULATOR CONTACT OPERATING CURRENT VOLTAGE LEAD-FREE SERIES PITCH POSITIONS MATERIAL MATERIAL TEMP RANGE RATING RATING SOLDERABLE MEC5 0.50 mm 60-200 Black LCP Phosphor Bronze -55 to +125 1.5 A (2 pins) 125 VAC Yes MEC6 0.635 mm 20-140 Black LCP Phosphor Bronze -55 to +125 2.4 A (2 pins) 195 VAC Yes MEC8 0.80 mm 20-140 Black LCP Phosphor Bronze -55 to +125 1.8 A (4 pins) 185 VAC Yes MEC1 1.00 mm 20-140 Black LCP Phosphor Bronze -55 to +125 2.2 A (2 pins) 250 VAC Yes MECF 1.27 mm 10-100 Black/Natural LCP BeCu -55 to +125 3.5 A (2 pins) 280 VAC Yes MEC2 2.00 mm 10-100 Black/Natural LCP BeCu -55 to +125 3.5 A (2 pins) 238 VAC Yes F-221 samtec.com/EdgeCard Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.14 Gbps (1.00 mm) .0394 PITCH MINI EDGE CARD SOCKET PLATING OTHER POSITIONS PER ROW 1 02 D NP MEC1 - - - OPTION - - - OPTIONS 05, 08, 20, 30, 40, F NP A = Gold flash on =No Polarization = Alignment Pin 50, 60, 70 contact, Matte Tin (05, 08, 20 & 30 metal or plastic at on tail positions only) Samtec discretion Leave blank for L K polarization = 10 (0.25 m) = (7.87 mm) .310 Gold on contact, DIA Polyimide film Matte Tin on tail Pick & Place Pad TR =Tape & Reel (05-60 only) FR = Full Reel Tape & Reel (must order max. quantity per reel contact Samtec for quantity breaks) POSITIONS POLARIZED POSITIONS (05-60 only) MEC1 PER ROW (No Contact) Card Mates: 05 3, 4 (1.60 mm) .062 08 5, 6 thick card 20 15, 16 30 21, 22 40 31, 32 50 41, 42 60 31, 32, 63 & 64 70 53, 54, 115 & 116 (No. of Positions + 2) x (1.00) .03937 + (2.54) .100 (6.99) .275 (No. of Positions + 2) x (1.00) .03937 (9.04) (1.40) .356 .055 (8.51) .335 A OPTION Note: Some sizes, styles and options are non-standard, View complete specifications at: samtec.com MEC1 non-returnable. F-221 samtec.com/EdgeCard Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.