REVISION X MMT-1XX-XX-X-XV-XX-XX-XX OPTION No OF POSITIONS -P: PICK & PLACE PAD DO NOT -02 THRU -36 (SEE FIG 6, SHT 3) SCALE FROM (PER ROW) -TR: TAPE & REEL (SEE NOTE 6) THIS PRINT -FR: FULL REEL QTY. TAPE & REEL C LEAD STYLE (SEE NOTE 7) +.005 .13 SEE TABLE 1 (NO OF POS X .07874 2.0000 ) -.010 .25 OPTION POLARIZED (SPECIFY POS -XX PLATING SPECIFICATION ((NO OF POS - 1) X .07874 2.0000 ) .003 0.08 AS POS TO BE OMITTED) -T: MATTE TIN CONTACT AND TAIL -S: 30 SELECTIVE GOLD IN CONTACT OPTION C AREA, MATTE TIN ON TAIL L 02 -LC: LOCKING CLIP (SEE NOTE 5) -L: 10 SELECTIVE GOLD IN CONTACT (USE LC-05-TM SEE FIG 4 & 5, SHT 3) AREA, MATTE TIN ON TAIL -A: ALIGNMENT PIN -F: 3 SELECTIVE GOLD IN CONTACT (SEE FIG 3, SHT 2) AREA, MATTE TIN ON TAIL .0787 1.999 (FOR -DV USE 2TS-XX-DV-A) REF (FOR -SV USE 2TS-XX-SV-A) BODY SPECIFICATION -SV: SINGLE (USE 2TS-XX-SV-X) -DV: DOUBLE (USE 2TS-XX-D-X) 01 2 MAX SWAY (EITHER DIRECTION) 2 MAX SWAY T-1S13-XX-X-2 (EITHER DIRECTION) (TYP) .0197 0.500 SQ 2 MAX SWAY REF (TYP) (EITHER DIRECTION) C +.000 0.00 POST HEIGHT 0.13 -.005 C (SEE TABLE 1) 903 +.0100 +0.254 .0394 1.001 .079 2.00 -.0000 0.000 REF (SEE NOTE 4) C .006 0.15 2TS-XX-SV-X .060 1.52 (TYP) FIG 1 .1987 5.05 REF MMT-110-01-X-SV SHOWN (SEE NOTE 3) PROPRIETARY NOTE * * NOTES: UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS C 1. REPRESENTS A CRITICAL DIMENSION. TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES 2. MINIMUM PUSHOUT FORCE: 2 LB INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 3. TAILS WILL BE SHEARED ON -02 LEAD STYLEXX: .01 0.3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 0.13 PHONE: 812-944-6733 FAX: 812-948-5047 4. MEASURED FROM BEND. OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS .XXXX: .0020 0.051 e-Mail info SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. 5. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 4:1 IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS DESCRIPTION: MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION. INSULATOR: LCP, UL 94 VO, COLOR: BLACK 2 mm TERMINAL SV/DV 6. -TR OPTION ORDERS INVOLVING PARTIAL REEL QUANTITIES MAY BE PACKAGED TERMINAL: PHOS BRONZE DWG. NO. ACCORDING TO THE SAMTEC PACKAGING EFFICIENCY STANDARDS (SPES) FOUND ON WWW.SAMTEC.COM. MMT-1XX-XX-X-XV-XX-XX-XX 7. -FR OPTION WILL BE SHIPPED AT THE MAX QUANTITY PER REEL, BASED ON OPTIONS SELECTED. SHEET OF BY: GREG R 06/22/1992 1 3 F: DWG MISC MKTG MMT-1XX-XX-X-XV-XX-XX-XX-MKT.SLDDRWREVISION X C 02 L 2TS-XX-D-X .157 4.00 REF 01 2 MAX SWAY (EITHER DIRECTION) .0787 2.000 C L .2774 7.05 REF FIG 2 (SEE NOTE 3) MMT-110-01-X-DV SHOWN (DIFFRENT AS SHOWN, OTHERWISE SAME AS FIG 1) .061 1.54 .043 1.09 REF (TYP) PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, ((NO OF POS - 2) X .07874 2.0000 ) .003 0.08 MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 FIG 3 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. -A: ALIGNMENT PIN DESCRIPTION: MMT-110-01-X-XV-A SHOWN DO NOT SCALE DRAWING 2 mm TERMINAL SV/DV (DIFFRENT AS SHOWN, OTHERWISE SAME AS FIG 1) DWG. NO. SHEET SCALE: 4:1 MMT-1XX-XX-X-XV-XX-XX-XX F: DWG MISC MKTG MMT-1XX-XX-X-XV-XX-XX-XX-MKT.SLDDRW SHEET OF BY: GREG R 06/22/1992 2 3