(2.00 mm) .0787 PITCH CABLE ASSEMBLY/COMPONENTS PINS WIRE PLATING ASSEMBLED END END 2 SERIES - - - - - - PER ROW GAUGE OPTION LENGTH OPTIONS OPTIONS (Only available with S2SD 05, 07, 10, 24 L XX.XX S D, DR & DS) = Double Row = 10 = Wire Length in = Single End 15, 20, 25, 30 PVC Cable 24C (0.25 m) Inches (69.85 mm) (Standard sizes) NUS = Color Gold on 02.75 min. D = Notch up, straight Coded contact S2SDT = Double End (Pin 1 to Pin N-1) Cable = Double Row (S2SD only) Blue *Teflon Specify S for single ended NDS Cable and D for double ended. 26 = Notch down, straight (24, 28, 30 (Pin 1 to Pin 2) Gauge only) (X)R 28 = Retention Latch NUX (SR mates with T2M-WT) 30 = Notch up, crossed (Pin 1 to Pin N) S2SD(T) (X)S = Screw Down Board Mates: No. of positions x NDX (10 positions minimum) (2.00) .0787 + (3.50) .138 T2M = Notch down, crossed (mates with T2M-DS) (Pin 1 to Pin 1) 24C CABLE SPECIFICATIONS COLOR CODING (7.52) .296 PIN COLOR Insulator Material: Black LCP 1 BROWN (5.15) Contact Material: .203 2 RED BeCu 3 ORANGE Plating: 4 YELLOW Au over 50 (1.27 m) Ni Wire: 5 GREEN (11.38) *DuPont Teflon is a 24, 26, 28 or 30 AWG .448 6 VIOLET Assembly registered trademark of the Operating Temp Range: Length 7 GRAY E.I. du Pont de Nemours -10 C to +105 C (PVC) (3.18) .125 and Company or its affiliates. -40 C to +125 C (*Teflon ) 8 WHITE Current Rating 9 BLACK (S2SD-24/T2M): Notes: 10 BLUE 3.8 A per pin Teflon cable is intended ETC REPEAT (2 pins powered) for crimp only. Contact Voltage Rating: Samtec for solderable cable 250 VAC applications. For wiring option information View complete specifications at: samtec.com S2SD and samtec.com S2SDT refer to drawings on web. POSITIONS ROW LATCH WIRE ISD2 SERIES 01 L - PER ROW - OPTION - OPTION - GAUGE - - 05, 07, 10, 15, D M CC81L 2426 L = Double = Metal = Contact, Loose = 24 to 26 AWG = 10 (0.25 m) 20, 25, 30 Row Retention Gold on contact (Standard sizes) Latch CC81R 2830 = Contact, = 28 to 30 AWG S Full Reel = Screw (17,000 Parts Down per Reel) (2.00) (2.03) .079 (2.07) .081 .080 DIA (3.68) (2.64) .145 .104 (1.78) (12.35) .070 .486 (3.17) .125 M S TOOLING Hand Tool: CAT-HT-281-2430-13 Mini Applicator: CAT-MC-281-2426-XX-01 (24-26 AWG) Extraction Tool: CAT-EX-169-01 Mini Applicator: CAT-MC-281-2830-XX-01 (28-30 AWG) Note: Some lengths, styles and options are non-standard, non-returnable. View complete specifications at: samtec.com ISD2, samtec.com CC81R & samtec.com CC81L F-221 samtec.com/2mm-TigerEye Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Rectangular Cable Assemblies category: Click to view products by Samtec manufacturer: Other Similar products are found below : MC320E-N-23 A08KR08KR26E203B G125FC10668L0-0300L G125FC10668L0-0150L G125-FC11068L0-0150L G125-FC11068L0-0300L A06XAF06XAF22K254B A10XAF10XAF22K152B A13KR13KR26E254B A12SUR12SUR32W203A A16KR16KR26E203B A12KR12KR26E305A A12KR12KR26E305B A12ZR12ZR28H203B A12ZR12ZR28H203A A10SR10SR30K254A A09SR09SR30K305A A14KR14KR26E254A A14KR14KR26E254B A10ZR10ZR28H254A A09ZR09ZR28H305A A09ZR09ZR28H305B A13ZR13ZR28H203A A15KR15KR26E254A A13KR13KR26E305B A11ZR11ZR28H254A A11ZR11ZR28H254B A11SR11SR30K254A A12SUR12SUR32W254A A10ZR10ZR28H305B A12ZR12ZR28H254A A15KR15KR26E305A A15KR15KR26E305B A11SR11SR30K305A A11ZR11ZR28H305A A11ZR11ZR28H305B A13ZR13ZR28H254A A12SUR12SUR32W305A A12ZR12ZR28H305A A12ZR12ZR28H305B A20XAF20XAF22K51B A13ZR13ZR28H305A A20XAF20XAF22K102B A20XAF20XAF22K152B A20XAF20XAF22K203B A20XAF20XAF22K254B A20XAF20XAF22K305B A16XSR16XSR36R254B A03ZR03ZR28H51B A03SR03SR30K51B