SC-1P1-GG Samtec

F-213 SUPPLEMENT SC8P1GG EZ2P3GT SC, EZ SERIES STANDARD, LOW PROFILE & SMT SOCKETS Speci cations: SC1P1, SC6P1, SC, EZ Contact: EZ1P1, EZ6P1 BeCu Shell: (0,76) Brass (1,83) .030 -GG Plating: .072 30 (0,76 m) Au over DIA 50 (1,27 m) Ni on contact X Y Z Part No. 10 (0,25 m) Au over DIA .010 .015 (1,52) .061 50 (1,27 m) Ni on shell SC1P1 (0,51) (3,18) (7,62) DIA -GT Plating: (0,71) EZ1P1 .020 .125 .300 30 (0,76 m) Au over .028 SC6P1 50 (1,27 m) Ni on contact (0,51) (4,57) (8,89) .020 .180 .350 Sn over 50 (1,27 m) Ni EZ6P1 (1,32) Z on shell .052 DIA -TT Plating: Y Sn over 50 (1,27 m) Ni on contact Sn over 50 (1,27 m) Ni on shell X -ST Plating: Insertion Depth (SC-1P1, SC-6P1) = .95 to .145 (2,41 mm to 3,68 mm) DIA 10 (0,25 m) Au over Plating Available (SC-1P1) = GG, GT, TT, ST Plating Available (SC-6P1) = GG, GT 50 (1,27 m) Ni on contact Sn over 50 (1,27m) Ni on shell Current Rating: EZ2P3 SC1W1, EZ1W1 1A per contact Contact Resistance: 10 m Insertion Force (SC): (0,76) (1,83) 9oz (2,50 N) avg, (1,83) .030 .072 .072 16oz (4,45 N) max DIA DIA Withdrawal Force (SC): 2.5oz (0,70 N) avg, (1,52) .061 1.5oz (0,42 N) min DIA Insertion Force (EZ): (0,76) 2.5oz (0,70 N) avg, .030 (0,71) (0,71) 5.5oz (1,53N) max .028 (1,52) .028 Withdrawal Force (EZ): .061 DIA 2.0oz (0,56 N) avg, 0.35oz (0,10 N) min (1,32) (1,32) .052 Lead DIA Accepted: .052 DIA .015 to .022 Z DIA (0,38 mm to 0,56 mm) and (13,77) most IC leads (0,89) .542 .035 RECOMMENDED DIA (8,86) PC HOLE SIZE: Y .349 LEAD SIZE HOLE SIZE (0,46) .018 DIA (0,61) .024 DIA (0,51) .020 DIA (0,66) .026 DIA (0,64) .025 DIA (0,79) .031 DIA (4,32) (0,64) (0,76) .030 DIA (0,91) .036 DIA .170 .025 (0,89) .035 DIA (1,04) .041 DIA SQ (1,14) .045 DIA (1,30) .051 DIA (1,32) .052 DIA (1,47) .058 DIA (0,51) (0,46) .018 SQ (0,76) .030 DIA .020 (0,64) .025 SQ (1,02) .040 DIA DIA Y Z (1,14) .045 SQ (1,75) .069 DIA Part No010 .015 (0,20) .008 x (0,71) .028 (0,89) .035 DIA (0,25) .010 x (0,51) .020 (0,71) .028 DIA SC1W1XX1 (12,95) (17,86) .510 .703 (0,41) .016 x (0,51) .020 (0,79) .031 DIA EZ1W1XX1 (0,41) .016 x (0,61) .024 (0,89) .035 DIA SC1W1XX2 (9,14) (14,05) (0,41) .016 x (0,79) .031 (1,04) .041 DIA .360 .553 EZ1W1XX2 SC1W1XX3 (6,60) (11,51) .260 .453 EZ1W1XX3 Note: Some sizes, styles and Insertion Depth = .125 to .170 (3,18 mm to 4,32 mm) Insertion Depth = .125 to .157 (3,18 mm to 3,99 mm) options are non-standard, Plating Available = GG, GT Plating Available = GG, GT, TT non-returnable. WWW.SAMTEC.COMF-213 SUPPLEMENT SC8P1GT SC1P4GG SC, EZ SERIES STANDARD, LOW PROFILE & SMT SOCKETS Speci cations: SC5P1 SC3P1 SC-1P4 Contact: BeCu Shell: Brass -GG Plating: (1,83) 20 (0,51 m) Au over 50 (1,83) .072 (1,27 m) Ni on contact .072 DIA DIA -GT Plating: 20 (0,51 m) Au over 50 (2,41) (3,10) (1,27 m) Ni on contact (0,51) .095 .122 (0,76) Current Rating: .020 (4,83) .030 5A per contact .190 (1,32) (5,84) Contact Resistance: .052 .230 (1,32) DIA 10 m .052 Insertion Force: DIA (0,76) 6.5oz (1,81 N) avg, .030 13oz (3,62 N) max DIA (0,76) (.032 (0,81 mm) DIA probe) .030 Withdrawal Force: DIA 3oz (0,83 N) avg, 2oz (0,56 N) min (.032 (0,81 mm) DIA probe) Insertion Depth = .080 to .150 (2,03 mm to 3,81 mm) Lead DIA Accepted: .016 to .020 (0,41 mm to 0,51 mm) Plating Available = GG, GT, TT Insertion Depth = .105 to .170 (2,67 mm to 4,32 mm) SC4P1, EZ4P1 Lead DIA Accepted: .015 to .020 (0,38 mm to 0,51 mm) Plating Available = GG, GT, TT (1,83) SC1P4 .072 DIA (3,35) (0,51) .132 .020 (6,10) (1,32) .240 .052 (2,28) (0,76) DIA .090 .030 DIA (0,51) .020 DIA Insertion Depth = .080 to .105 (2,03 mm to 2,67 mm) (0,71) Lead DIA Accepted: .016 to .021 (0,41 mm to 0,53 mm) .028 Plating Available = GG, GT, TT (2,18) (9,53) .086 .375 DIA SC8P1 (1,98) .078 (3,18) (1,83) DIA .125 .072 DIA (2,11) (0,76) (0,25) .083 .030 .010 (4,19) DIA .165 (1,32) .052 DIA (0,74) .029 DIA Note: Insertion Depth = .085 to .140 (2,16 mm to 3,56 mm) Insertion Depth = .175 to .215 (4,45 mm to 5,46 mm) Some sizes, styles and Lead DIA Accepted = .032 to .038 (0,81 mm to 0,97 mm) Lead DIA Accepted: .016 to .020 (0,41 mm to 0,51 mm) options are non-standard, Plating Available = GG, GT, TT Plating Available = GG, GT non-returnable. WWW.SAMTEC.COM