NOTES: REVISION DQ ANY CHANGES MADE TO THIS PRINT MUST ALSO BE MADE TO THE SFC PRINT C 1. REPRESENTS A CRITICAL DIMENSION. 2. MINIMUM PUSHOUT FORCE: .5 LB. SFM-1XX-XX-XXX-D-XXX C 3. COPLANARITY: .004 0.10 = POS 05 THRU 26 DO NOT .006 0.15 = POS 27 THRU 50 SCALE FROM No OF POSITIONS OPTIONS 4. TUBE ALL POSITIONS. PARTS TO BE TUBED WITH THIS PRINT NOTCH GOING WITH ARROW. ALL POSITIONS AVAILABLE (LEAVE BLANK FOR STANDARD 5. PINS CAN BE ORIENTED IN ANY DIRECTION AND USE SFM-XX-D) -02 THRU -50 BOTH ROWS MUST FACE SAME WAY. -N: NO POLARIZATION NOTCH (USE BODY: SFM-XX-D-XX-X) 6. SEE NOTCH FOR PROPER ORIENTATION. (USE SFM-XX-D-XX-N) 7. MAXIMUM PIN HEIGHT VARIATION: .003 0.08 -A: ALIGNMENT PIN (USE SFM-XX-D-A-X) C FROM PIN TO PIN AND ROW TO ROW, MUST BE (SEE FIG 4, SHT 2) LEAD STYLE MEASURED BETWEEN ADJACENT PINS. -LC: LOCKING CLIP (SEE FIG 6, SHT 3 & NOTE 8) -01: THROUGH HOLE 8. DUE TO HIGH AMOUNT OF INSERTION FORCE (AVAILABLE ON ALL LEADS) (USE CONTACT: C-44-01-XXX) NEEDED, THE -LC OPTION IS NOT COMPATIBLE WITH -P: PICK AND PLACE PAD (SEE FIG 1, SHT 1) AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL (SEE FIG 5, SHT 2) -02: SURFACE MOUNT PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION. (AVAILABLE ON 5 THRU 50 POSITION ONLY) (USE CONTACT: C-44-02-XXX) 9. DIMENSION TO BE MEASURED AT BEND. -TR: TAPE & REEL (SEE SHT 4) (SEE FIG 2, SHT 2) (NOT AVAILABLE WITH -DS OPTION) -03: STRAIGHT MODIFIED -K: POLYIMIDE FILM PAD (.005 0.13 THICKNESS) *DIMENSIONS N/A FOR -N OPTION (USE CONTACT: C-44-03-XXX) (SEE FIG 3, SHT 2) (USE K-DOT-.157-.250-.005) (SEE FIG 1, SHT 1) -SN: SOLDER NAIL FOR .062 BOARD *.145 3.68 REF -L1: THROUGH HOLE (LOW INSERTION) (SFM-XX-D-SN AND WT-27-01-T) (USE CONTACT: C-61-01-XXX) (AVAILABLE WITH LEAD STYLE -02, -L2 & -T2) (SEE FIG 1, SHT 1) (NOT AVAILABLE WITH -A & -LC) *.020 0.51 REF -L2: SURFACE MOUNT (LOW INSERTION) -SN2: SOLDER NAIL FOR .093 BOARD (USE CONTACT: C-61-02-XXX) .120 3.05 REF (SFM-XX-D-SN AND WT-27-02-T) *.080 2.03 REF (SEE FIG 2, SHT 2) (AVAILABLE WITH LEAD STYLE -02, -L2 & -T2) .050 1.27 -L3: STRAIGHT MODIFIED (LOW INSERTION) (NOT AVAILABLE WITH -A & -LC) 02 REF (USE CONTACT: C-61-03-XXX) -DS: DUAL SCREW DOWN FOR .062 BOARD (SEE FIG 1, SHT 1) (SEE FIG 8, SHT 3) -T1: THROUGH HOLE (PHOS BRONZE) (ONLY AVAILABLE WITH -01, -02 AND -03 LEAD C L (USE CONTACT: C-119-01-XXX) STYLE)(NOT AVAILABLE WITH OPTIONS -N, -A, (SEE FIG 1, SHT 1) -LC, -P, -TR, -K, -SN AND SN2), (USES SFM-XX-D-DS, -T2: SURFACE MOUNT (PHOS BRONZE) CPS-RR-XX-XX-X, ACCRT-01 AND WT-27-XX-T 01 (USE CONTACT: C-119-02-XXX) ALWAYS FILLED) C L (SEE FIG 2, SHT 2) .050 1.27 REF BODY SPECIFICATION -D: DOUBLE ROW (No OF POS x .050 1.27 ) + .015 0.38 REF PLATING SPECIFICATION -S: 30 SELECTIVE GOLD IN CONTACT AREA, C SFM-XX-D-LC-X MATTE TIN ON TAIL L (No OF POS x .050 1.27 ) + .155 3.94 REF -F: 3 FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL C-XX-01-XXX -H: 30 HEAVY GOLD IN CONTACT AREA, (SEE NOTE 5) 3 GOLD ON TAIL -L: 10 LIGHT SELECTIVE GOLD IN CONTACT AREA, .180 4.57 REF MATTE TIN ON TAIL .015 0.38 REF .110 2.79 REF -STL: 30 SELECTIVE GOLD IN CONTACT AREA, TIN/LEAD (90/10+/-5%) TAIL C (ONLY AVAILABLE ON -02 OR -L2 LEADSTYLES) C -SM: 30 SELECTIVE GOLD IN CONTACT AREA, L (SEE TABLE 1) MATTE TIN ON TAIL MAX SWAY 2 -FM: 3 FLASH SELECTIVE GOLD IN CONTACT AREA, (EITHER DIRECTION) MATTE TIN ON TAIL REF -LM: 10 LIGHT SELECTIVE GOLD IN CONTACT AREA, .050 1.27 C MATTE TIN ON TAIL .005 0.13 REF (NO OF POS x .050 1.27 ) - .050 1.27 REF SECTION 1 MAX SWAY C (EITHER DIRECTION) PROPRIETARY NOTE * * FIG 1 UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, THROUGH HOLE/STRAIGHT MODIFIED MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR .XX: .01 0.3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 0.13 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS .XXXX: .0020 0.051 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 3:1 DESCRIPTION: .050 x .050 SOCKET STRIP DOUBLE ROW ASSEMBLY INSULATOR: LCP UL 94V-O, COLOR: BLACK CONTACT: TIGER EYE: BeCu DWG. NO. TIGER EYE LITE: PHOSPHOR BRONZE SFM-1XX-XX-XXX-D-XXX BY: JORDAN 12/11/89 SHEET OF1 4 F: DWG MISC MKTG SFM-1XX-XX-XXX-D-XXX-MKT.SLDDR REVISION DQ (SEE NOTE) C (SEE NOTE) (No OF POS x .050 1.27 ) - .050 1.27 REF (TOL ACCUM .005 0.13 OVER 50 POS) C-XX-02-XXX 02 C +.005 +0.13 .190 4.83 -.002 -0.05 (SEE NOTE 9) .190 4.83 .1575.0050 4.0000.127 .019.020 0.480.51 01 IN-PROCESS C -X2 FIG 3 2 MAX SWAY -K: POLYIMIDE FILM PAD (EITHER DIRECTION) (SAME AS FIG 1, DIFFERENT AS SHOWN) FOR HAND FILL ONLY NOTE: DIMENSION APPLIES PRIOR NOTE: = USED MEASURED DIMENSION REF TO RE-PRESS, SEE SECTION = - .1575 4.000 )/2 .020 0.51 FOR FINISHED DIMENSION SFM-XX-D-LC-X +.002 +0.051 C .185 4.70 -.005 -0.127 4 (SEE NOTES 7 & 9) SEE NOTE 3 SEE NOTE SEE NOTE 7 SEE NOTE 7 2 .161 4.09 REF FIG 2 -X2: SURFACE MOUNT SECTION (SAME AS FIG 1, DIFFERENT AS SHOWN) .394 10.01 PPP-02 REF .225 5.72.010 0.25 (SEE TABLE 2) REF (NO. OF POS x .050 1.27 ) + .125 3.18 REF .062 1.57 SFM-XX-D-A-X .050 1.27 FIG 5 REF -P: PICK AND PLACE PAD (PAD TO BE ORIENTED A SHOWN FOR 5-12 POSITION PARTS) (FOR 13-50 POSITION PARTS, PAD MAY BE ORIENTED IN EITHER DIRECTION) (SAME AS FIG 1, DIFFERENT AS SHOWN) .050 1.27 R REF REF PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, (NO. OF POS x .050 1.27 ) + .075 1.91 REF MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 FIG 4 DESCRIPTION: -A: ALIGNMENT PIN DO NOT SCALE DRAWING .050 x .050 SOCKET STRIP DOUBLE ROW ASSEMBLY (SAME AS FIG 1, DIFFERENT AS SHOWN) DWG. NO. SHEET SCALE: 3:1 SFM-1XX-XX-XXX-D-XXX F: DWG MISC MKTG SFM-1XX-XX-XXX-D-XXX-MKT.SLDDRW BY: JORDAN 12/11/89 SHEET OF2 4