REVISION AQ SFML-1XX-XX-XXX-D-XXX OPTIONS (LEAVE BLANK FOR STANDARD No OF POSITIONS AND USE SFML-XX-D) .020 0.51 DO NOT -05, -07, -08, -10 THRU -50 -A: ALIGNMENT PIN (USE SFML-XX-D-A) REF SCALE FROM (PER ROW) .060 1.52 (SEE FIG 5, SHT 3) THIS PRINT -LC: LOCKING CLIP (SEE FIG 7, SHT 3) REF LEAD STYLE DETAIL D (USE (2) LC-05-TM & SFML-XX-D) (SEE NOTE 9) -01: THROUGH HOLE FIG 1 -P: PICK & PLACE PAD (SEE FIG 6, SHT 3) (USE C-44-01-XXX, SEE FIG 1, SHT 1) ALTERNATE CONSTRUCTION (USE PPP-02) (NOT AVAILABLE IN 5 POS) THROUGH HOLE/STRAIGHT MODIFIED -02: SURFACE MOUNT -TR: TAPE & REEL PACKAGING (SHOWN: SFML-125-X1-XXX-D) (USE C-44-02-XXX, SEE FIG 3, SHT 2) (N/A with -X1 AND -X3 LEAD STYLE, -03: STRAIGHT MODIFIED SEE FIG 2, SHT 1) D (USE C-44-03-XXX, SEE FIG 1, SHT 1) -K: POLYIMIDE FILM PAD -L1: THROUGH HOLE (LOW INSERTION) 01 (USE K-DOT-.157-.250-.005)(SEE FIG 4, SHT 2) (USE C-61-01-XXX, SEE FIG 1, SHT 1) -SN: SOLDER NAIL (USE SFML-XX-D-SN & -L2: SURFACE MOUNT (LOW INSERTION) .145 3.68 REF WT-27-01-T) (SEE FIG 8, SHT 4) (USE C-61-02-XXX, SEE FIG 3, SHT 2) (AVAILABLE ON -X2 LEAD STYLES ONLY) 02 -L3: STRAIGHT MODIFIED (LOW INSERTION) -SN2: SOLDER NAIL FOR .093 BOARD (USE C-61-03-XXX, SEE FIG 1, SHT 1) (USE SFML-XX-D-SN & -T1: THROUGH HOLE (PHOS BRONZE) .120 3.05 REF WT-27-02-T) (SEE FIG 8, SHT 4) (USE C-119-01-XXX, SEE FIG 1, SHT 1) .080 2.03 (ONLY AVAILABLE WITH -02, L2, AND T2 LEAD -T2: SURFACE MOUNT (PHOS BRONZE) .050 1.27 REF REF STYLE. NOT AVAILABLE WITH -A, -LC OPTIONS) (USE C-119-02-XXX, SEE FIG 3, SHT 2) ROW SPECIFICATION .100 2.54 REF (TYP) -D: DOUBLE ROW (USE SFML-XX-D-X) REF (TYP) (SEE NOTE 5 PLATING SPECIFICATION C & TABLE 3) -S: 30 SELECTIVE GOLD IN CONTACT AREA, (No OF POS x .050 1.27 + .155 3.94 REF MATTE TIN ON TAIL -F: 3 FLASH SELECTIVE GOLD IN CONTACT AREA, SFML-XX-D MATTE TIN ON TAIL (No OF POS x .050 1.27 ) + .015 .38 REF .035 0.89 -H: 30 HEAVY GOLD IN CONTACT AREA, 3 GOLD ON TAIL -L: 10 LIGHT SELECTIVE GOLD IN CONTACT AREA, REF (TYP) MATTE TIN ON TAIL .065 1.65 REF .180 4.57 -STL: 30 SELECTIVE GOLD IN CONTACT AREA, REF TIN/LEAD (90/10+/-5%) TAIL (ONLY AVAILABLE ON -02 AND -L2 LEADSTYLES) C -SM: 30 SELECTIVE GOLD IN CONTACT AREA, (SEE TABLE 1) MATTE TIN ON TAIL -LM: 10 LIGHT SELECTIVE GOLD IN CONTACT AREA, .110 2.79 .005 0.13 REF MATTE TIN ON TAIL REF -FM: 3 FLASH SELECTIVE GOLD IN CONTACT AREA, REF 1 MAX SWAY MATTE TIN ON TAIL 2 MAX SWAY (SEE TABLE 1) (EITHER DIRECTION) (EITHER DIRECTION) C C .050 1.27 .050 1.27 NOTES: (No OF POS x .050 1.27 ) - .050 1.27 REF 1. REPRESENTS A CRITICAL DIMENSION.C 2. COPLANARITY: .004 .10 FOR POS. 04 THRU 26 C SECTION .006 .15 FOR POS. 27 THRU 50 3. MINIMUM PUSHOUT FORCE: .5 LB. 4. MAXIMUM ALLOWABLE BOW: .002 INCH/INCH MM/MM AFTER ASSEMBLY. 5. POSITIONS -05, 07 AND -08 WILL HAVE ONLY ONE LOCKING TAB AT DIMENSION SHOWN AND WILL NOT HAVE POLARIZATION NOTCH POSITIONS -10 THROUGH -24 WILL HAVE ONLY ONE LOCKING TAB AT DIMENSION SHOWN POSITIONS -25 THROUGH -34 WILL HAVE TWO LOCKING TABS AT DIMENSION SHOWN POSITIONS -35- THROUGH -50 WILL HAVE THREE LOCKING TABS: TWO AT DIMENSION SECTION SHOWN & ONE CENTERED ON INSULATOR. 6. SEE NOTCH FOR PROPER ORIENTATION. 7. PINS CAN BE ORIENTED IN ANY DIRECTION BOTH ROWS MUST FACE SAME WAY. 8. MAXIMUM PIN HEIGHT VARIATION: .003 0.08 FROM PIN TO PIN AND ROW TO ROW, MUST BE C MEASURED BETWEEN ADJACENT PINS. 9. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE LC OPTION 10. TUBE PARTS WITH NOTCH AND/OR LOCKING TAB TOWARD ARROW. NOTCH NOT AVAILABLE ON -05, -07 AND -08 POSITION PARTS. POS 1 UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE * * DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, TOLERANCES ARE: MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES USER DIRECTION OF UN-REELING INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE .XX: .01 0.3 2 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR POCKET NOT DETAILED 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 0.13 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS .XXXX: .0020 0.051 e-Mail: info SAMTEC.com code: 55322 WRITTEN CONSENT OF SAMTEC, INC. MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2:1 DESCRIPTION: INSULATOR: .050 1.27 x .050 1.27 LOCKING SOCKET ASSEMBLY SEE NOTE 6 VECTRA E130i, LCP UL 94 VO DWG. NO. FIG 2 COLOR: BLACK LOCKING TAB SFML-1XX-XX-XXX-D-XXX CONTACT: BeCu -TR: TAPE & REEL PACKAGING PHOS BRONZE (ALTERNATE KEYING OPTION SHOWN) F: DWG MISC MKTG SFML-1XX-XX-XXX-D-XXX-MKT.SLDDRW SHEET OF BY: BRATCHER 4/19/99 1 4REVISION AQ (No OF POS x .050 1.27 ) - .050 1.27 (TOL ACCUM .005 0.13 2 MAX SWAY C (EITHER DIRECTION) C-XX-X2-XXX +.002 +0.05 C .185 4.70 -.005 -0.13 4 SEE NOTE 2 SEE NOTE 8 2 .161 4.09 REF FIG 3 -X2: SURFACE MOUNT SECTION (SAME AS FIG 1, UNLESS OTHERWISE STATED) .190 4.83 C .019.010 0.470.25 .1575.0050 4.0000.127 NOTE: = USED MEASURED DIMENSION (REF) = - .1575 4.000 ) /2 .020 0.51 FIG 4 -K: POLYIMIDE FILM PAD OPTION (SHOWN: SFML-110-X2-X-D-K) (ALTERNATE CONSTRUCTION SHOWN) F: DWG MISC MKTG SFML-1XX-XX-XXX-D-XXX-MKT.SLDDRW PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND C PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS +.005 +0.13 AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, .190 4.83 -.002 -0.05 INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail: info SAMTEC.com code: 55322 WRITTEN CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING DIMENSION APPLIES PRIOR TO RE-PRESS, .050 1.27 x .050 1.27 LOCKING SOCKET ASSEMBLY SEE SECTION FOR FINISHED DIMENSION DWG. NO. SHEET SCALE: 4:1 SFML-1XX-XX-XXX-D-XXX IN-PROCESS SHEET OF BY: BRATCHER 4/19/99 2 4