REVISION AX SFSDX-XX-XXX-XX-XX.XX-XX-XXX (No OF POS x .050 1.27 ) FEP CABLE OPTION -NXX OPTION (END 2) + .015 0.38 REF (ONLY AVAILABLE WITH -D, -DL, -DR & -DS) -T: FEP (LEAVE BLANK FOR 01 STANDARD PVC INSULATION) -NUS: NOTCH UP, STRAIGHT C L DO NOT (PIN 1 TO PIN N-1) SCALE FROM -NDS: NOTCH DOWN, STRAIGHT THIS PRINT No OF POSITIONS (PIN 1 TO PIN 2) .250 6.35 -02 THRU -50 -NUX: NOTCH UP, CROSSED .120 3.05 REF .145 3.68 REF REF (PER ROW) (PIN 1 TO PIN N) -NDX: NOTCH DOWN, CROSSED (PIN 1 TO PIN 1) WIRE GAUGE (AWG) END OPTION -28, -30 02 (END OPTION COMBINATIONS NOT AVAILABLE) COLOR CODE: FIG 1 -S: SINGLE END .050 1.27 .080 2.03 REF -D: DOUBLE END -S: SINGLE END LEAVE BLANK FOR ALL BLACK WIRE REF (MUST CHOOSE FROM -NXX OPTIONS) C: COLOR CODED WIRE SFSD-10-28-XX-XX.XX-S SHOWN -SL: SINGLE ENDED WITH FRICTION LOCK (SEE TABLE 4, SHT 3) ISDF-XX-D (SEE SHEET 2, FIG 3)(ONLY AVAILABLE ON (NOT AVAILABLE WITH FEP OPTION) *5,*7, 10 THRU 50 POSITION) -DL: DOUBLE ENDED WITH FRICTION LOCK .050 1.27 REF PLATING SPECIFICATION (SEE SHEET 2, FIG 4) (ONLY AVAILABLE -H: 30 HEAVY GOLD IN CONTACT AREA, ON *5,*7, 10 THRU 50 POSITION) 3 GOLD ON TAIL (MUST CHOOSE FROM -NXX OPTIONS) -G: 10 LIGHT GOLD IN CONTACT AREA, -SR: SINGLE ENDED WITH RETENTION LATCH (SEE SHEET 3, FIG 5) 3 GOLD ON TAIL (ONLY AVAILABLE ON -02 THRU -50 POS) -F: 3 FLASH GOLD IN CONTACT AREA, -DR: DOUBLE ENDED WITH RETENTION LATCH C .440 11.18 3 GOLD ON TAIL (SEE SHEET 3, FIG 6) -GF: 3 FLASH SELECTIVE IN CONTACT AREA, REF (ONLY AVAILABLE ON -02 THRU -50 POS) .249 6.32 3 GOLD ON TAIL (MUST CHOOSE FROM -NXX OPTIONS) (ONLY AVAILABLE TO EXISTING -SS: DUAL SCREW DOWN, SINGLE ENDED CABLE REF CUSTOMERS SEE -F PLATING) (SEE SHT 4, FIG 7) (SEE NOTE 15) (NOT AVAILABLE WITH OPTIONS SL, DL, SR & DR (SEE TABLE 3, SHEET 1) USES ISDF-XX-D-DS, CPS-RR-XX-XX-X & ACCRT-01) ASSEMBLED LENGTH -DS: DUAL SCREW DOWN, DOUBLE ENDED CABLE SPECIFY IN INCHES (SEE SHT 4, FIG 8) (SEE NOTE 15) (SINGLE END: 03.00 INCH 76.2mm (NOT AVAILABLE WITH OPTIONS SL, DL, SR & DR USES ISDF-XX-D-DS, CPS-RR-XX-XX-X & ACCRT-01, MINIMUM, MUST CHOOSE FROM NXXX OPTIONS) DOUBLE END: 03.25 INCH 82.6mm C MINIMUM) ASSEMBLED LENGTH: (SEE NOTE 8) (* = NOT AVAILABLE WITH POLARIZATION KEY) DWCX-XX-XX-300 POLARIZATION KEY C ASSEMBLED LENGTH: XX.XX .125 3.18 SECTION NOTES: 1. REPRESENTS A CRITICAL DIMENSION. C 2. MINIMUM PULLOUT FORCE: 3.0 LBS 13.3 N . 3. CONTACT MUST BE INSERTED UNTIL RETENTION FEATURE LOCKS INTO PLACE. C FIG 2 4. ALL FINISHED GOODS ARE TO BE ELECTICAL TESTED INCLUDING HI-POT TEST C -D: DOUBLE END AT 1000 VOLTS DC. AFTER FINAL ELECTRICAL TEST, LABEL EACH ASSEMBLY SFSD-10-28-XX-XX.XX-D-NUS SHOWN WITH 1 LABEL-ET STAMP ON THE BODY. (SAME AS FIG 1, UNLESS OTHERWISE STATED) 5. TINNED COPPER WIRE IS RoHS COMPLIANT. 6. PARTS TO BE INDIVIDUALLY PACKAGED IN A ASBBLTXXXXX BUBBLE BAG. PROPRIETARY NOTE * * UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND 7. NOTE DELETED. DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, 8. FOR LENGTHS LESS THAN 12 in, TOLERANCE SHALL BE +/-.125. MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, FOR OTHER LENGTHS, TOLERANCE SHALL BE +/-2%. DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE 9. NOTE DELETED. OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR .XX: .01 .3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 10. REFER TO CRIMP SPECIFICATIONS PRINT FOR CRIMP AND STRIP REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS DIMENSIONS, TOLERANCES, TOOLING AND ITS REQUIREMENTSXXXX: .0020 .051 e-Mail info SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. 11. 3LB MIN WIRE CRIMP STRENGTH FOR -30 AWG AND 4.5LB MIN DO NOT SCALE DRAWING SHEET SCALE: 2:1 DESCRIPTION: MATERIAL: WIRE CRIMP STRENGTH FOR -28 AWG050 1.27 SOCKET DISCRETE CABLE ASSEMBLY INSULATOR: LCP UL 94V-0, COLOR: BLACK 12. NOTE DELETED. CONTACT: BeCu DWG. NO. 13. -TC TEFLON USE FOR DOUBLE ENDED ASSEMBLIES ONLY, CABLE INSULATION: PVC OR FEP ALL SINGLE ENDED ASSEMBLIES USE SILVER PLATED DWCT-XX-01. WIRE: DWC: TINNED COPPER. SFSDX-XX-XXX-XX-XX.XX-XX-XXX 14. CUT LENGTH IS ASSEMBLY LENGTH MINUS OVERALL LENGTH SUBTRACTOR. 15. THE PRODUCTS WITH OPTION -DS AND -SS SHOULD BE PACKAGED IN BUBBLE BAGS. BY: BRATCHER 5/5/2005 SHEET OF1 5 F: DWG MISC MKTG SFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRWREVISION AX N-1 N N-1 N 02 01 N-1 N 01 02 01 02 NOTCH END 1 01 02 N N-1 NOTCH END 1 NOTCH END 2 (SEE TABLE 2) -NUS NOTCH END 2 (END 2 NOTCH UP, CABLE STRAIGHT) -NDX (SEE TABLE 5 FOR PIN MAPPING) (END 2 NOTCH DOWN, CABLE CROSSED) (SEE TABLE 5 FOR PIN MAPPING) 02 01 N-1 N ISDF-XX-D-L ISDF-XX-D-L 01 02 N N-1 NOTCH END 1 NOTCH END 2 (SEE TABLE 2) -NUX (END 2 NOTCH UP, CABLE CROSSED) (SEE TABLE 5 FOR PIN MAPPING) N-1 N N-1 N FIG 3 -SL: SINGLE END FRICTION LOCK SFSDX-10-28-XX-XX.XX-SL SHOWN FIG 4 01 02 01 02 (SAME AS FIG 1, UNLESS OTHERWISE STATED) -DL: DOUBLE END FRICTION LOCK SFSDX-10-28-XX-XX.XX-DL-NUS SHOWN NOTCH END 1 (SAME AS FIG 1, UNLESS OTHERWISE STATED) PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. NOTCH END 2 DESCRIPTION: -NDS DO NOT SCALE DRAWING .050 1.27 SOCKET DISCRETE CABLE ASSEMBLY (END 2 NOTCH DOWN, CABLE STRAIGHT) (SEE TABLE 5 FOR PIN MAPPING) DWG. NO. SHEET SCALE: 1:0.571429 SFSDX-XX-XXX-XX-XX.XX-XX-XXX F: DWG MISC MKTG SFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW BY: BRATCHER 5/5/2005 SHEET OF2 5