F-215 (Rev 24AUG15) SSM120SDV SSM116SSV SSM115LSH (2.54 mm) .100 SSM SERIES TIGER CLAW SURFACE MOUNT SOCKET Mates with: NO. PINS PLAT ING OTHER TSW, MTSW, TST, ROW SSM 1 TSS, ZST, ZSS, DW, PER ROW OP TION OPTION OPTION EW, ZW, TSM, HMTSW, HTSW, TSSH, BST, HTSS, TLW, MTLW BE M 02 thru 36 = Bottom Entry = Metal Pick & SPECIFICATIONS (SV, SH, DH) Place Pad (DV & SV only) (5 positions min.) For complete speci cations F DV only and recommended PCB layouts = Gold ash 02 thru 40 LC see www.samtec.com SSM on contact, (DV) = Locking Clip (5.94) .234 Matte Tin on tail Insulator Material: x (DV & SV only) (5.72) .225 Black Liquid Crystal Polymer Contact Samtec for Contact Material: DH & SH Phosphor Bronze L Plating: = 10 (0.25 m) Au or Sn over K Gold on contact, 50 (1.27 m) Ni = (6.50 mm) .256 DIA Matte Tin on tail Current Rating (SSM/TSW): P Polyimide lm 5.2 A per pin = Plastic Pick Pick & Place Pad (1 pin powered per row) & Place Pad (2 positions min.) S Voltage Rating: (DV & SV only) DV & SV only 405 VAC / 572 VDC = 30 (0.76 m) (6 pos. minimum, Operating Temp Range: Gold on contact, contact Samtec -55C to +125C with Gold for availability on Matte Tin on tail XXX -55C to +105C with Tin smaller positions) = Polarized Position Contact Resistance: (BE not available) ALSO AVAILABLE 10 m APPLICATIONS (4.95) (MOQ Required) Insertion Depth: .195 x SV/DV is (4.34 mm) .171 to TR (10.03) TSM (1.27) Alignment pin (7.24 mm) .285 or pass-through .395 .050 = Tape & Reel Packaging SSM TSSH from top (5.56 mm) .219 plus Contact Samtec. (29 positions max.) board thickness minimum from bottom SH/DH is (4.34 mm) .171 to (6.35 mm) .250 Insertion Force: (Single contact only) HORIZONTAL 5 oz (1.39 N) average SV DV Normal Force: = Single Row Vertical Pin = Double Row Vertical Pin 125 grams (1.21 N) average Withdrawal Force: (2.54) .100 x No. of Positions (Single contact only) 72 02 2 oz (0.56 N) average (2.54) .100 x No. of Positions 36 RoHS Compliant: Yes (2.54) (5.08) (2.54) .200 .100 .100 (4.42) Processing: (7.04) .174 01 71 .277 LeadFree Solderable: 01 Yes DH Coplanarity: (7.37) (7.37) Less than 28 positions .290 .290 (0.15 mm) .006 max More than 27 positions (0.20 mm) .008 max (2.54) .100 (2.54) .100 (1.27) .050 (0.51) .020 (0.13) .005 (0.51) .020 SH, SV, DV Coplanarity: (1.42) .056 (0.15 mm) .006 max RECOGNITIONS SH DH = Single Row Horizontal Pin = Double Row Horizontal Pin For complete scope of recognitions see (2.54) .100 x No. of Positions www.samtec.com/quality 72 02 (2.54) .100 x No. of Positions (1.78) (11.00) .070 (0.89) .035 SQ TYP 01 36 .433 (5.72) (2.54) (3.18) .225 .100 .125 FILE NO: 090871 0 000 01 (1.78) 71 (11.18) (0.25) .070 .440 .010 (8.13) (8.13) .320 .320 Note: Some lengths, styles and options are non-standard, (0.51) .020 (2.54).100 (0.51) .020 non-returnable. WWW.SAMTEC.COM Due to technical progress, all designs, speci cations and components are subject to change without notice.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Headers & Wire Housings category: Click to view products by Samtec manufacturer: Other Similar products are found below : 95000-104TRLF 10135584-644402LF DF62W-EP2022PCA 95000-106TRLF DF62W-2022SCA DF62W-EP2022PC 2203348 DF62W- 2022SC 1084018 1029039 1084017 802-10-012-10-002000 1112640 1112639 000-34000 0009482033 0009507031 57102-S06-03LF 57202-S52-04LF PCN6-15S-2.5E 0039019024 58102-G61-06LF 582553-1 0009485154 0009508121 0022285053 0050291907 018731A LY20-4P-DT1-P1E-BR 02.125.8002.8 60101931 60598-1 (Cut Strip) M1625-3R/100 61062-3 61082-181009 636-1427 638009-1 641938-9 641991-4 644168-1 647662-1 65039-019ELF 65781-047 65817-002LF 65817-015LF 65863-015LF 66207-023LF 67016-026LF 67046- 001LF 67095-007LF