F-219 (Rev 24FEB21) TCSD TIGER TMM TCSD08D02.0001NR .26 (6.6 mm) EYE (2.00 mm) .0787 TCSD SERIES TIGER EYE IDC SOCKET CABLE Mates with: NO. PINS END TYPE PLATING OTHER TMM, TMMH, STMM, LENGTH 01 N PER ROW OPTION MMT, TW, MTMM, EHT, STRIP OPTION OPTION ETMM (-SR), ZSTMM SPECIFICATIONS For complete specifications see www.samtec.com TCSD N 04, 05, XX.XX = Notch Polarization Insulator Material: = Assembled Length 06, 07, Black Glass Filled Polyester Contact: Assembled Length 1 08, 10, 12, BeCu in INCHES ( /) 8 1 inch minimum Plating: = Gold flash on contact 13, 15, 17, Au or Sn over 50 (1.27 m) Ni F Wire: Leave blank for standard plating: 20, 22, 25 28 AWG 7/36 Stranded, 30 (0.76 m) Gold on contact area Tinned, Copper with (Standard sizes) Gray PVC Insulator Current Rating (TCSD/STMM): 2.8 A per pin (2 pins powered) Operating Temp Range: S D SR -40 C to +105 C P XX Lead Size Accepted: = Single End = Double End = Strain Relief = Position Polarization (0.48 mm) .019 to (0.53 mm) .021 No. of positions x Insertion Depth: (2.00) .0787 + (7.874) .3100 (2.87 mm) .113 to (3.17 mm) .125 01 RoHS Compliant: Yes 02 Not available with O, M, RECOGNITIONS R, DXX or BXX Specify XX as position TCSD For complete scope of number. Same position recognitions see = Socket Strip will be polarized on www.samtec.com/quality D XX (3.17) both ends. (1.02) .125 1 = Daisy Chain .040 FILE NO. E111594 01 XX 2 B XX 1/8 min. = Breakout Double (4.00) Row .158 ALSO AVAILABLE Connectors Specify XX as number of (MOQ Required) conductors to be broken out. Outer Most No. of positions x (2.00) .0787 + (4.00) .157 Other sizes (End of (1.00) .039 assembly) Other platings 4 minimum 4 (5.08) XX .200 R POLARIZING KEY 5 max. = Reversed 2 min. (2.00) (2.00) Specify PK-01-07 for polarizing key .0787 .0787 Breakout starts with Number 1 lead indicated by brown wire or (Available in wheels of six each). red stripe. Shown on top side. Also polarizes SMM 5 2 Series socket strips. EJECTOR HEADERS & M LOCKING CLIPS = Middle Reverse RW = Reverse Wiring See TMM Series. 5 Requires DXX 01 O = Outside Reverse 02 See EHT Series. Note: Blue or black wire TCSD Series assemblies are opposite position 1. 3 Requires DXX 5 non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. IDCX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Ribbon Cables / IDC Cables category: Click to view products by Samtec manufacturer: Other Similar products are found below : FSK-12A AWG28-10G EHJ3C EHJ4C cab-LVDV-PWR-10-15 FSP-25A 3365/15 (100FT) cab-LVDV-DAT-34-15 49635-C62-S2 1-3636- 600-5204 92315-1408 426171120-3 3625/08 (100M) 0044704 2-1589735-3 JSM015PP2DCC23N 92301-0283 ACL-eSSI-2 92301-0718 MMSDT-06-20-S-05.5-D-K-LDX IDD-04-G NM-2J2-051-PS1-JJAB 1700/14SF (100FT) 1700/26SF (100FT) 1700/34SF (100FT) 3801/09 (100FT) 119-885 DS1057-06A282R-30.5 DS1057-12A282R-30.5 DS1057-14A282R-76.5 DS1057-20A282R-76.5 DS1057-24A282R-76.5 DS1057-26A282R-76.5 DS1057-30A282R-76.5 DS1057-34A282R-76.5 DS1057-40A282R-76.5 DS1057-60A282R-76.5 DS1057-64A282R- 76.5 DS1058-08M28-30.5 DS1058-30M28-30.5 3750/10 (100FT) 0015712 0015905 S30109 11203 11223 11243 11262 0037147 0022512