F-219 TCSD TIGER TMM TCSD08D02.0001NR .26 (6.6 mm) EYE (2.00 mm) .0787 TCSD SERIES TIGER EYE IDC SOCKET CABLE Mates with: NO. PINS END TYPE PLATING OTHER TMM, TMMH, STMM, LENGTH 01 N PER ROW OPTION MMT, TW, MTMM, EHT, STRIP OPTION OPTION ETMM (-SR), ZSTMM SPECIFICATIONS For complete specifications see www.samtec.com TCSD N 04, 05, XX.XX = Notch Polarization Insulator Material: = Assembled Length 06, 07, Black Glass Filled Polyester Contact: Assembled Length 1 08, 10, 12, BeCu in INCHES ( /) 8 2 inches minimum Plating: = Gold flash on contact 13, 15, 17, Au or Sn over 50 (1.27 m) Ni F Wire: Leave blank for standard plating: 20, 22, 25 28 AWG 7/36 Stranded, 30 (0.76 m) Gold on contact area Tinned, Copper with (Standard sizes) Gray PVC Insulator Current Rating (TCSD/STMM): 2.8 A per pin (2 pins powered) Operating Temp Range: S D SR -40 C to +105 C P XX Lead Size Accepted: = Single End = Double End = Strain Relief = Position Polarization (0.48 mm) .019 to (0.53 mm) .021 No. of positions x Insertion Depth: (2.00) .0787 + (7.874) .3100 (2.87 mm) .113 to (3.17 mm) .125 01 RoHS Compliant: Yes 02 Not available with O, M, RECOGNITIONS R, DXX or BXX Specify XX as position TCSD For complete scope of number. Same position recognitions see = Socket Strip will be polarized on www.samtec.com/quality D XX (3.17) both ends. (1.02) .125 1 = Daisy Chain .040 FILE NO. E111594 01 XX 2 B XX 1/8 min. = Breakout Double (4.00) Row .158 Connectors Specify XX as number of conductors to be broken out. Outer Most No. of positions x (2.00) .0787 + (4.00) .157 (End of (1.00) .039 assembly) 4 minimum 4 ALSO AVAILABLE (5.08) XX .200 (MOQ Required) R Other sizes 5 max. = Reversed 2 min. (2.00) (2.00) Other platings .0787 .0787 Breakout starts with Number 1 lead indicated by brown wire or red stripe. Shown on top side. 5 2 EJECTOR HEADERS & POLARIZING KEY M LOCKING CLIPS = Middle Reverse RW Specify PK-01-07 for = Reverse Wiring polarizing key (Available See TMM Series. in wheels of six each). Also polarizes SMM 5 Requires DXX Series socket strips. Ejector headers 01 O Locking clips = Outside Reverse Strain relief option 02 Note: Blue or black wire See EHT Series. TCSD Series assemblies are opposite position 1. 3 Requires DXX 5 non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. IDCX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Ribbon Cables / IDC Cables category: Click to view products by Samtec manufacturer: Other Similar products are found below : FSK-12A Ribbon Cable, 6 Pin, 500mm AWG28-10G EHJ3C EHJ4C EHJ5C cab-LVDV-PWR-10-15 FSP-25A Ribbon Cable, 4 Pin, 350mm Ribbon Cable, 6 Pin, 300mm cab-LVDV-DAT-34-15 49635-C62-S2 1-3636-600-5204 92315-1408 100063-0094 100063-0106 100063-0102 100063-0104 MMSD-02-20C-F-15.00-S-K 100063-0099 100063-0105 100063-0095 100063-0103 100063-0093 100063-0091 2200000068 100063-0092 100063-0101 100063-0100 100063-0097 TFSDT-08-28-H-15.00-S S1SD-02-30-GF-09.00-L MMSD-02-22C-F-15.00-S-K S1SS-02-28C-GF-02.00-L S1SDT-02-28-GF-03.00-L 2-1589735-3 JSM015PP2DCC23N 92301-0283 TCSD-22-D-26.00-01 S1SST-07-30- GF-06.00-L T2SD-20-24-L-07.87-TR-NUS DS1057-01-44A282R-30.5 FFSD-06-S-17.00-01-N IDSS-03-D-20.00-T TCMD-17-S-36.00-01- SR 92301-0718 839023 490107670612S MMSDT-06-20-S-05.5-D-K-LDX IDD-04-G