TSM-1XX-XX-XXX-SV-XX-XXX-XX REVISION BS OPTION 3 No OF POSITIONS -P: PICK & PLACE PAD (SEE FIG. 3) -02 THRU -50 USE PPP-07 (4 POS MINIMUM DO NOT OR -02 & -03 POS WITH -TR) SCALE FROM LEAD STYLE (SEE NOTE 7) THIS PRINT SEE TABLE 1 -TR: TAPE & REEL (SEE NOTE 7) PLATING SPECIFICATION (-02 THRU -22 POS) -T: MATT TIN CONTACT AND TAIL C -S: SELECTIVE, 30 Au / 50 Ni MIN ON .000 .00 OPTION 2 (No OF POS x .100 2.54 ) CONTACT, MATTE TIN TAIL .015 .38 -G: GOLD, 10 Au / 50 Ni MIN ON CONTACT, POLARIZED POSITION: SPECIFY PIN OMITTED 3 Au / 50 Ni MIN ON TAIL (No OF POS -1) x .100 2.54 -L: LIGHT SELECTIVE, 10 Au / 50 Ni MIN ON OPTION 1 CONTACT, MATTE TIN ON TAIL -LC: LOCKING CLIP (SEE FIG. 1)(SEE NOTE 8) -F: FLASH SELECTIVE, 3 Au / 50 Ni MIN ON USE LC-08-TM-02 (-02 THRU -36 POS: 2 PER STRIP, CONTACT, MATTE TIN TAIL 02 -02 POS: 1 PER STRIP) -H: HEAVY GOLD, 30 Au / 50 Ni MIN ON -A: ALIGNMENT PIN (SEE FIG. 2) CONTACT, 3 Au / 50 Ni MIN ON TAIL -TL: TIN / LEAD (90/10+/-5%) CONTACT AND TAIL .100 2.54 REF ROW SPECIFICATION LEAD STYLE -01 & -02 ONLY -SV: SINGLE VERTICAL (USE TSM-XX-SV-XX) -STL: SELECTIVE, 30 Au / 50 Ni MIN ON CONTACT, TIN/LEAD (90/10+/-5%) TAIL 01 LEAD STYLE -01 & -02 ONLY -TM: MATTE TIN CONTACT AND TAIL 5 MAX SWAY -SM: SELECTIVE, 30 Au / 50 Ni MIN ON CONTACT, TSM-XX-SV (TYP) MATTE TIN TAIL -LM: LIGHT SELECTIVE, 10 Au / 50 Ni MIN ON CONTACT, MATTE TIN TAIL -FM: FLASH SELECTIVE, 3 Au / 50 Ni MIN ON CONTACT, MATTE TIN TAIL -SS: STRIPE SELECTIVE, 30 Au / 50 Ni MIN ON CONTACT, MATTE TIN TAIL (SEE NOTE 9) T-1S6-XX-X-2 2 MAX SWAY 2 MAX TOE (EITHER DIRECTION) .025 0.64 SQ REF (TYP) (TYP) C (CONTACT AREA) .008 .20 C (SEE TABLE 1 +5 90 (TYP) & NOTE 5) -0 IN-PROCESS .050.010 1.270.25 (TYP) C .100 2.54 REF .006 .000 .00 .099 2.51 .005 .13 (SEE TABLE 1 LC-08-TM-02 .010 0.25 REF NOTES: C & NOTE 5) MAX REF C C 1. REPRESENTS A CRITICAL DIMENSION. (No OF POS -2) x .100 2.54 2. COPLANARITY TO BE WITHIN .006 .15 056 1.42 REF 2 MAX SWAY 3. BURR ALLOWANCE: .0015 .038 MAX. (EITHER DIRECTION) 4. MAXIMUM CUT FLASH: .015 .38 MAXIMUM ON TOP & SIDES OF BODY AND .030 .76 MAXIMUM ON SURFACE MOUNT SIDE OF BODY. 5. POST HEIGHT VARIATION BETWEEN ANY TWO PINS: .005 .13 MAXIMUM. FIG 1 6. MAXIMUM ALLOWABLE BOW: .002 .05 INCH/INCH AFTER ASSEMBLY. TSM-112-02-XXX-SV-LC SHOWN 7. LEADS MAY NOT BE VISIBLE FOR CUSTOMER VISUAL INSPECTION WITH -P OPTION ON SMALLER POSITIONS PARTS. 8. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE LC OPTION PROPRIETARY NOTE * * UNLESS OTHERWISE SPECIFIED, IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN INCHES. MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE LC OPTION. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: 9. -01 LEAD STYLE ONLY, MATES WITH SSW, SSQ, BCS, SSM, ESW, ESQ. AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, 10. MINIMUM PUSHOUT FORCE: 2LB. 8.90 N DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR .XX: .01 .3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS .XXXX: .0020 .051 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2.5:1 DESCRIPTION: INSULATOR: SINGLE ROW .100 SMT ASSEMBLY LCP, UL 94 VO DWG. NO. COLOR: BLACK TSM-1XX-XX-XXX-SV-XX-XXX-XX TERMINAL: PHOS BRONZE BY: DEAN P 8/21/2002 SHEET OF1 2 F: DWG MISC MKTG TSM-1XX-XX-XXX-SV-XX-XXX-XX-MKT.SLDDRWFIG 3 REVISION BS -P: PICK & PLACE PAD OPTION FIG 4 4 POSITION MINIMUM TUBE PACKAGING PLACE PAD ON CENTERLINE AS SHOWN .400 10.16 REF (SEE TABLE 3) C L PPP-07 NOTES: 1. LOAD PARTS POSITION 1 FIRST IN SAME DIRECTION AS ARROW. 2. NOTE DELETED 3. PACKAGE POSITIONS -04 THRU -36270 6.86 4. POLARIZED 4 POSITION PARTS WITHOUT PADS ARE TO BE LAYER PACKAGED REF OR PACKAGED IN TAPE AND REEL010 .25 FIG 5 -TR: TAPE & REEL PACKAGNG OPTION POS 1 (TOWARD ROUND HOLE) = (No OF POSITIONS x .100 2.54 ) - .400 10.16 2 FIG 2 -A: ALIGNMENT PIN OPTION TSM-112-02-X-SV-A SHOWN USER DIRECTION OF UN-REELING DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1 POCKET NOT DETAILED SEE TABLE 2 F: DWG MISC MKTG TSM-1XX-XX-XXX-SV-XX-XXX-XX-MKT.SLDDRW .100 2.54 REF PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, .062 1.57 INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE (No OF POS -2) x .100 2.54 REF REF OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 DESCRIPTION: DO NOT SCALE DRAWING SINGLE ROW .100 SMT ASSEMBLY DWG. NO. SHEET SCALE: 2:1 TSM-1XX-XX-XXX-SV-XX-XXX-XX BY: DEAN P 8/21/2002 SHEET OF2 2