TSS-1XX-XX-XXX-X-XX-XX
REVISION AE
POLARIZE OPTION
NO OF POS X .100[2.54]
No OF POSITIONS
XX INDICATES POSITION OMITTED
+.150[3.81] REF
OPTION
-02 THRU -18 &
DO NOT
20, 21, 24, 25, 28, 30, 32, 36 BLANK: STRAIGHT (STYLE 04 & 05 N/A)
SCALE FROM
NO OF POS X .100[2.54]
-RA: RIGHT ANGLE (STYLE -01, -02 & -03 N/A)
(PER ROW)
THIS PRINT
+.050[1.27] REF
-LL: LOCKING LEAD
LEAD STYLE -LA: -RA OPTION WITH -LL OPTION
01 02
SEE TABLE 1
ROW SPECIFICATION
-D: DOUBLE
-S: SINGLE
PLATING SPECIFICATION
-G: GOLD, 10'' Au / 50'' Ni NICKEL MIN ON CONTACT, 3'' AU / 50'' NI MIN ON TAIL
.265 6.73 -T: MATTE TIN CONTACT AND TAIL
.150 3.81
-S: SELECTIVE, 30'' Au / 50'' Ni MIN ON CONTATCT, MATTE TIN TAIL
REF
REF
-L: LIGHT SELECTIVE, 10'' Au / 50'' Ni MIN ON CONTACT, MATTE TIN TAIL
-H: HEAVY GOLD, 30'' Au / 50'' Ni MIN ON CONTACT, 3'' Au / 50'' Ni MIN ON TAIL
-F: FLASH SELECTIVE, 3'' Au / 50'' Ni MIN ON CONTACT, MATTE TIN TAIL
-STL: SELECTIVE, 30'' Au / 50'' Ni MIN ON CONTACT, TIN/LEAD (90/10+/-5%) TAIL
(AVAILABLE IN -01 STYLE ONLY)
-SS: STRIPE SELECTIVE, 30'' Au / 50'' Ni MIN ON CONTACT, MATTE TIN TAIL (SEE NOTE 7)
02 04 .165 4.19 REF
(GOLD PLATE)
SEE NOTE 4
(SEE NOTE 3)
.165 4.19 REF
C
(GOLD PLATE)
(SEE NOTE 3)
.365 9.27
.250 6.35
.100 2.54 REF
REF
REF
.250 6.35
REF
01 03 +.010 +.010
C
C
-.000 -.000
C
.100 2.54 REF
.04 1.0
.04 1.0
(TYP)
(TYP)
TERMINAL 1
'CRIMP'
(SEE TABLE 1) TERMINAL 1
.16 [4.1] (-02 & -03 POSITIONS) REF
(SEE TABLE 1)
.20 [5.1] (-04 THRU -36) REF
STRAIGHT
FIRST POSITION
(N/A ON SINGLE ROW -02 THRU -05 POSITIONS)
(-LL IS SHOWN FOR DIMENSIONAL PURPOSES)
INDICATOR
.017 0.43 MIN
TSS-XX-X
.350 8.89 REF
.0080 0.203
DETAIL 'CRIMP'
.015 0.38 REF
SCALE 8 : 1
(TYP ALL CRIMPS)
UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE
NOTES: DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
TOLERANCES ARE:
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
C
1. REPRESENTS A CRITICAL DIMENSION.
DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR
2. MINIMUM PUSHOUT FORCE: 3 LB. DISCLOSED TO OTHERS OR USED FOR ANY
.XX: .01 [.3] 2
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PURPOSE OTHER THAN THAT WHICH IT WAS
3. ASSEMBLE GOLD PLATED END AS SHOWN.
.XXX: .005 [.13]
PHONE: 812-944-6733 FAX: 812-948-5047
OBTAINED WITHOUT THE EXPRESSED WRITTEN
4. TERMINALS TO BE FLUSH TO .010 [.25] BELOW TOP OF SHROUD. .XXXX: .0020 [.051]
CONSENT OF SAMTEC, INC.
e-Mail: [email protected] code: 55322
5. TSS-1XX-04-X-D-RA-XX ASSEMBLIES ARE TO BE PACKAGED IN A PT-1-24-01-40
MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2:1 DESCRIPTION:
TUBE WITH TWO TP-13 PLUGS PER TUBE (ALL POSITIONS).
INSULATOR: PBT, UL 94 VO, COLOR: BLACK SLIM TOP SHROUD TERMINAL STRIP
C 6. ORIENTATE PINS TO REDUCE THE NUMBER OF BANDOLIER MARKS
TERMINAL: PHOSPHOR BRONZE
IN THE POST AREA (SEE TABLE 2). DWG. NO.
7. AVAILABLE ON STRAIGHT LEAD STYLES -01, -02, -03 AND ON RA LEAD STYLE
TSS-1XX-XX-XXX-X-XX-XX
-04. MATES WITH SSW, SSQ, SSM, BCS, ESW & ESQ ONLY.
BY: JORDAN 01/23/1990 SHEET OF1 2
F:\DWG\MISC\MKTG\TSS-1XX-XX-XXX-X-XX-XX-MKT.SLDDRWREVISION AE SINGLE -LL/-LA
SEE NOTE 4
C SEE NOTE 4
C REF REF
C
C L
90
C
90
C
.035.010 0.890.25 .100 2.54
.035.010 0.890.25
.04 1.0 (TYP)
ODD POS
TERMINAL 2
EVEN POS
(SEE TABLE 1)
TERMINAL 1
DOUBLE -LL/-LA
(SEE TABLE 1)
.04 1.0 (TYP)
RIGHT ANGLE
(-LA IS SHOWN FOR DIMENSIONAL PURPOSES)
C
L
SEE NOTE 4 C
(2ND ROW ONLY)
.075 1.91 REF
.130 3.30 REF
ODD POS
EVEN POS
= CRIMP LOCATION
+.010
FIG 1
C
-.000
+.010
-.000
+.010
-.000
POST AREA
* PINS TO BE FLIPPED OPPOSITE OF SELECTIVE
TERMINAL 1
(SEE TABLE 1)
PLATING BEFORE BEING INSERTED
BANDOLIER REF
TERMINAL 2 TERMINAL 1
(SEE TABLE 1) (SEE TABLE 1)
.150 3.81 REF
-RA IN-PROCESS VIEW
(BEFORE RIGHT ANGLE)
(SEE NOTE 6)
C
(SEE TABLE 2)
TAIL AREA
IN-PROCESS VIEW
(-T PLATING ONLY)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PURPOSE OTHER THAN THAT WHICH IT WAS
PHONE: 812-944-6733 FAX: 812-948-5047
OBTAINED WITHOUT THE EXPRESSED WRITTEN
e-Mail: [email protected] code: 55322
CONSENT OF SAMTEC, INC.
DESCRIPTION:
DO NOT SCALE DRAWING
SLIM TOP SHROUD TERMINAL STRIP
DWG. NO.
SHEET SCALE: 2:1
TSS-1XX-XX-XXX-X-XX-XX
F:\DWG\MISC\MKTG\TSS-1XX-XX-XXX-X-XX-XX-MKT.SLDDRW BY: JORDAN 01/23/1990 SHEET OF2 2