9S1212H4D01 Sanyo Denki

DC Fan 120 120 25 mm San Ace 120 9S type Silent Fan General Specifications Material Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 547. Dielectric strength 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 10 M or more with a 500 VDC megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -30 to +70C (Non-condensing) Sensor Lead wire Red Black Yellow Mass 140 g Specifications The models listed below have ribs and pulse sensors. For models without ribs, append1 to the end of model numbers. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. -1 V V A W min m/min CFM Pa inchH O dB (A) C h 9S1212H401 5.0 to 13.2 0.39 4.68 2700 2.45 86.5 45.2 0.18 36 -10 to +60 9S1212F401 5.0 to 13.8 0.19 2.28 2200 2.0 70.6 30.0 0.12 30 12 9S1212M401 6.0 to 13.8 0.13 1.56 1850 1.66 58.6 22.7 0.09 24 40000/60C -10 to +70 9S1212L401 7.0 to 13.8 0.08 0.96 1500 1.36 48.1 14.9 0.06 17 9S1224M401 24 14 to 26.4 0.06 1.44 1850 1.66 58.6 22.7 0.09 24 The following sensor and control options are available for selection. Available for all models. Without sensor Differs according to the model. Refer to the table on p. 578. Lock sensor PWM control Airflow - Static Pressure Characteristics 9S1212H401 With pulse sensor 9S1212F401 With pulse sensor 9S1212M401 With pulse sensor Operating voltage range Operating voltage range Operating voltage range (inch H2O) (Pa) (inch H2O) (Pa) 2 (inch H O) (Pa) 0.25 60 0.20 50 40 0.15 13.8 V 0.20 50 40 13.2 V 0.15 30 12 V 13.8 V 40 0.15 0.10 30 12 V 12 V 5 V 30 0.10 20 6 V 0.10 20 20 0.05 5 V 0.05 10 0.05 10 10 0 0 0 0 0 0 3 3 3 0.5 1.0 1.5 2.0 2.5 3.0 (m /min) (m /min) (m /min) 0.5 1.0 1.5 2.0 2.5 0.5 1.0 1.5 2.0 (CFM) 20 40 60 80 100 (CFM) 0 0 10 20 30 40 50 60 70 80 0 10 20 30 40 50 60 70 (CFM) Airflow Airflow Airflow 177 Static pressure Static pressure Static pressure DC Fan 120 mm sq. DC Airflow - Static Pressure Characteristics 9S1212L401 With pulse sensor 9S1224M401 With pulse sensor Operating voltage range Operating voltage range (inch H2O) (Pa) (inch H2O) (Pa) 40 40 0.15 0.15 30 30 13.8 V 0.10 0.10 26.4 V 12 V 20 20 24 V 7 V 0.05 0.05 14 V 10 10 0 0 0 3 3 0.5 1.0 1.5 2.0 (m /min) 0 0.5 1.0 1.5 2.0 (m /min) 0 10 20 30 40 50 60 70 (CFM) 0 10 20 30 40 50 60 70 (CFM) Airflow Airflow (unit: mm) Dimensions (With ribs) 4-4.30.3 Mounting hole Lead wire AWG24 UL 1007 (10) +30 300 0 (5) (5) 104.80.3 +1 25 0 1190.5 Rotating direction Airflow direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Outlet side Inlet side 4-4.5 104.80.3 4-4.5 104.80.3 117 117 Options page: p. 533 page: p. 539 Finger guards Resin finger guards Model no.: 109-019E, 109-019K, 109-019C, 109-019H Model no.: 109-1000G page: p. 540 Resin filter kits Model no.: 109-1000F13 (13PPI), 109-1000F20 (20PPI), 109-1000F30 (30PPI), 109-1000F40 (40PPI) 178 126 134 117 Static pressure 1190.5 104.80.3 104.80.3 Static pressure 117 104.80.3