9WP0824H402

Splash Proof Fan IP68 80 80 25 mm San Ace 80W 9WP type General Specifications Material Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-1) Expected life See the table below. (L10 life: 90% survival rate for continuous operation in indoor free air at 60C, rated voltage) Motor protection function Locked rotor burnout protection, Reverse polarity protection For details, please refer to p. 547. Dielectric strength 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame) Insulation resistance 10 M or more with a 500 VDC megger (between lead wire conductors and frame) Sound pressure level (SPL) At 1 m away from the air inlet Storage temperature -30 to +70C (Non-condensing) Sensor Lead wire Red Black Yellow Mass 130 g Ingress protection IP68 Specifications The models listed below have ribs and pulse sensors. For models without ribs, append1 to the end of model numbers. Rated voltage Operating voltage range Rated current Rated input Rated speed Max. airflow Max. static pressure SPL Operating temperature Expected life Model no. -1 V V A W min m/min CFM Pa inchH O dB (A) C h 9WP0812G401 10.8 to 13.2 0.38 4.56 4500 1.5 53 80.4 0.323 40 -20 to +60 40000/60C 12 9WP0812H401 10.2 to 13.8 0.13 1.56 2900 1.03 36.4 35.3 0.142 29 60000/60C 9WP0824S401 0.1 2.4 3400 1.2 42.4 48.0 0.193 34 40000/60C 24 20.4 to 27.6 -20 to +70 9WP0824H401 0.07 1.68 2900 1.03 36.4 35.3 0.142 29 60000/60C 9WP0848S401 48 40.8 to 55.2 0.06 2.88 3400 1.2 42.4 48.0 0.193 34 40000/60C The following sensor and control options are available for selection. Available for all models. Without sensor Differs according to the model. Refer to the table on p. 580. Lock sensor PWM control Airflow - Static Pressure Characteristics 9WP0812G401 With pulse sensor 9WP0812H401 With pulse sensor 9WP0824S401 With pulse sensor Operating voltage range Operating voltage range Operating voltage range (inch H2O) (Pa) 2 (inch H O) (Pa) (inch H2O) (Pa) 0.40 100 50 0.20 70 90 0.18 0.25 0.35 60 40 80 0.16 27.6 V 0.30 13.8 V 13.2 V 0.20 50 70 0.14 12 V 0.25 60 0.12 30 12 V 24 V 40 10.2 V 0.15 0.20 50 0.10 30 20.4 V 20 40 10.8 V 0.08 0.15 0.10 30 0.06 20 0.10 20 0.04 10 0.05 10 0.05 10 0.02 0 0 0 0 0 0 3 3 3 (m /min) 0.5 1.0 1.5 (m /min) 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 (m /min) 0.5 1.0 1.5 (CFM) 0 10 20 30 40 50 0 10 20 30 40 50 60 (CFM) 0 10 20 30 40 50 (CFM) Airflow Airflow Airflow 283 Static pressure Static pressure Static pressure Splash Proof Fan 80 mm sq. DC Airflow - Static Pressure Characteristics 9WP0824H401 With pulse sensor 9WP0848S401 With pulse sensor Operating voltage range Operating voltage range 2 (inch H O) (Pa) 2 (inch H O) (Pa) 0.30 50 0.20 70 55.2 V 0.18 0.25 60 0.16 40 48 V 27.6 V 0.20 0.14 50 24 V 40.8 V 30 0.12 20.4 V 40 0.15 0.10 30 0.08 20 0.10 0.06 20 0.04 10 0.05 10 0.02 0 0 0 0 3 3 0.5 1.0 1.5 (m /min) 0.5 1.0 1.5 (m /min) 0 10 20 30 40 50 (CFM) 0 10 20 30 40 50 (CFM) Airflow Airflow (unit: mm) Dimensions (With ribs) 250.5 800.5 4-4.30.3 (3) (3) 71.50.3 Mounting hole +30 300 0 (10) Lead wire AWG24 UL 1007 Rotating direction Airflow direction Reference Dimensions of Mounting Holes and Vent Opening (unit: mm) Inlet side, Outlet side 71.50.3 4-4.5 78.5 Options page: p. 532 page: p. 539 Finger guards Resin finger guards Model no.: 109-049E, 109-049H, 109-049C Model no.: 109-1002G 284 90 78.5 800.5 Static pressure 71.50.3 71.50.3 Static pressure