Product data sheet SSM3A325BD Characteristics Harmony, Solid state modular relay, 25 A, DIN rail mount, zero voltage switching, input 432 V DC, output 48600 V AC Main Range of Product Harmony Solid State Relays Product or Component Solid state relay up to 30 A Type Device short name SSM3 Number of Channels 3 Number of phases 3 phase Output switching mode Zero voltage switching Complementary Mounting Support Symmetrical DIN rail Line Rated Current 25A Output voltage 48...600 V AC Uc control circuit voltage 4...32 V DC Tightening torque 0.6...0.7 N.m for input 1.36...1.7 N.m for output Connections - terminals Screw terminals 0.2...1.3 mm, AWG 24...AWG 16) input Screw terminals 1.3...5.3 mm, AWG 16...AWG 10) output Maximum capacitance 8pF for input/output Insulation resistance 1000 MOhm Local signalling For input status LED (green) Switching voltage 4V DC turn-on 1V DC turn-off Input current 2228mA Solid state output type Zero voltage switching Load current 0.125A Transient overvoltage 1100 V Surge current 286A 20 ms 50 Hz 300A 16.6 ms 60 Hz Maximum voltage drop <1.35V on-state Maximum Horse Power Rating 1Hp 104F (40C) 240 V AC 2Hp 104F (40C) 380 V AC 3hp 104F (40C) 480 V AC Maximum It for fusing 410A.S for 10 ms at 50 Hz 374A.s for 8.3 ms at 60 Hz Maximum leakage current 0.25mA off-state DV/dt 500 V/s off-state at maximum voltage Response time 0.5 cycle (turn-on) 0.5 cycle (turn-off) Power factor 0.5 (with maximum load) Overvoltage category III Net Weight 1.63lb(US) (0.74kg) Jan 20, 2022 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Environment Dielectric strength 4KV AC for input/output 4kV AC for input or output to case Pollution degree 2 Standards CSA C22.2 No 14 IEC 60950-1 UL 508 Product Certifications CSA UL EAC Marking EAC CSA UL CE IP degree of protection IP20 Ambient air temperature for operation -4176F (-2080C) Ambient Air Temperature for Storage -40212F (-40100C) Ordering and shipping details Category 22375 - INTERFACE MODULE(ABA,R,S) Discount Schedule CP2 GTIN 3606485441719 Nbr. of units in pkg. 1 Package weight(Lbs) 28.32oz (803g) Returnability Yes Country of origin MX Packing Units Unit Type of Package 1 PCE Package 1 Height 5.51in (14cm) Package 1 width 4.33in (11cm) Package 1 Length 4.33in (11cm) Unit Type of Package 2 S02 Number of Units in Package 2 5 Package 2 Weight 9.50lb(US) (4.311kg) Package 2 Height 5.91in (15cm) Package 2 width 11.81in (30cm) Package 2 Length 15.75in (40cm) Offer Sustainability Sustainable offer status Green Premium product California proposition 65 WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov REACh Regulation REACh Declaration EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration Mercury free Yes RoHS exemption information Yes China RoHS Regulation China RoHS Declaration Environmental Disclosure Product Environmental Profile Circularity Profile End Of Life Information 2