TM241CE24R

Product datasheet TM241CE24R Characteristics Main Range of product Modicon M241 Product or component type Logic controller [Us] rated supply voltage 100...240 V AC Discrete input number 14 discrete input including 8 fast input conforming to IEC 61131-2 Type 1 Discrete output type Relay Transistor Discrete output number 6 relay 4 transistor including 4 fast output Discrete output voltage 24 V DC transistor output 5...125 V DC relay output 5...250 V AC relay output Discrete output current 2 A with Q4...Q9 terminal(s) relay output 0.1 A with TR0...TR3 terminal(s) fast output (PTO mode) 0.5 A with TR0...TR3 terminal(s) transistor output Complementary Discrete I/O number 24 Number of I/O expansion module 7 (local I/O architecture) 14 (remote I/O architecture) Supply voltage limits 85...264 V Network frequency 50/60 Hz Discrete input logic Sink or source Discrete input voltage 24 V Discrete input voltage type DC Voltage state 1 guaranteed >= 15 V input Voltage state 0 guaranteed <= 5 V input Discrete input current 5 mA input Input impedance 4.7 kOhm input Response time 50 s turn-on operation with I0...I13 terminal(s) input Configurable filtering time 1 s fast input Discrete output logic Positive logic (source) Output voltage limits 125 V DC relay output 30 V DC transistor output 277 V AC relay output Output frequency <= 1 kHz transistor output <= 20 kHz fast output (PWM mode) <= 100 kHz fast output (PLS mode) Accuracy +/- 0.1 % at 0.02...0.1 kHz for fast output +/- 1 % at 0.1...1 kHz for fast output Protection type Short-circuit protection transistor output Short-circuit and overload protection with automatic reset transistor output Reverse polarity protection transistor output Without protection relay output Reset time 10 ms automatic reset output 12 s automatic reset fast output Memory capacity 8 MB program 64 MB system memory RAM Data backed up 128 MB built-in flash memory backup of user programs Data storage equipment <= 16 GB SD card optional Battery type BR2032 lithium non-rechargeable, battery life: 4 yr 1 / 7 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Backup time 2 years at 77 F (25 C) Execution time for 1 KInstruction 0.3 ms event and periodic task 0.7 ms other instruction Application structure 8 event tasks 4 cyclic master tasks 3 cyclic master tasks + 1 freewheeling task 8 external event tasks Realtime clock With Clock drift <= 60 s/month at 77 F (25 C) Positioning functions PTO function 4 channel(s) (positioning frequency: 100 kHz) Counting input number 4 fast input (HSC mode) at 200 kHz 14 standard input at 1 kHz Control signal type A/B signal at 100 kHz fast input (HSC mode) Pulse/direction signal at 200 kHz fast input (HSC mode) Single phase signal at 200 kHz fast input (HSC mode) Integrated connection type USB port with connector mini B USB 2.0 Ethernet with connector RJ45 Non isolated serial linkserial 1" with connector RJ45 and interface RS232/RS485 Non isolated serial linkserial 2" with connector removable screw terminal block and interface RS485 Supply Serial link supplyserial 1" at 5 V, <= 200 mA Transmission rate 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m - communication protocol: RS485 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 9.84 ft (3 m) - communication protocol: RS232 480 Mbit/s for bus length of 9.84 ft (3 m) - communication protocol: USB 10/100 Mbit/s - communication protocol: Ethernet Communication port protocol Modbus non isolated serial link with master/slave method Port Ethernet 1 - 10BASE-T/100BASE-TX port with copper cable support Communication service FDR Downloading IEC VAR ACCESS Monitoring NGVL Programming Updating firmware SMS notifications DHCP server (via TM4 Ethernet switch network module) DHCP client (embedded Ethernet port) SNMP client/server FTP client/server SQL client Modbus TCP client I/O scanner Ethernet/IP originator I/O scanner (embedded Ethernet port) Ethernet/IP target, Modbus TCP server and Modbus TCP slave Send and receive email from the controller based on TCP/UDP library Web server (WebVisu & XWeb system) OPC UA server DNS client Local signalling 1 LED red module error (ERR) 1 LED green PWR 1 LED green RUN 1 LED green SD card access (SD) 1 LED red BAT 1 LED green SL1 1 LED green SL2 1 LED per channel green I/O state 1 LED red I/O error (I/O) 1 LED red bus fault on TM4 (TM4) 1 LED green Ethernet port activity Electrical connection Removable screw terminal block for inputs and outputs (pitch 5.08 mm) Removable screw terminal block for connecting the 24 V DC power supply (pitch 5.08 mm) Cable distance between devices Unshielded cable: <= 50 m for input Shielded cable: <= 10 m for fast input Unshielded cable: <= 50 m for output Shielded cable: <= 3 m for fast output Insulation 500 V AC between supply and internal logic Non-insulated between supply and ground Marking CE Sensor power supply 24 V DC at 400 mA supplied by the controller 2 / 7