XALD328

Product data sheet XALD328 Characteristics dark grey station - white flush/red mushroom 30 /black flush pushbuttons 22 Price* : 108.00 USD Main Range of product Harmony XALD Product or component type Complete control station Device short name XALD Product destination For XB5 22 mm control and signalling units Control station application Three functions Colour of base of enclosure Light grey RAL 7035 Colour of cover Dark grey RAL 7016 Material Polycarbonate Operator profile 1 flush - 1 latching mushroom head - 1 flush push-buttons Operators description White up arrow 1 NO - red O 1 NC - black down arrow 1 NO Control station composition 1 flush push-button white 1 NO black up arrow marking 1 flush push-button black 1 NO white down arrow marking 1 mushroom head 30 mm push-button red 1 NC O marking Marking location Marking on push-button Contact operation Slow-break Complementary Cable entry 2 knock-outs for cable entry, clamping capacity: <= 0.55 in (14 mm) 2 knock-outs for Pg 13 cable gland and ISO M20, clamping capacity: <= 0.47 in (12 mm) Product weight 0.7 lb(US) (0.317 kg) Resistance to high pressure washer 1015.26 psi (7000000 Pa) at 131 F (55 C), distance: 0.1 m Colour of marking White marking when green, red or black caps Black marking when white caps Positive opening With conforming to EN/IEC 60947-5-1: appendix K Operating travel 0.06 in (1.5 mm) (NC changing electrical state) 0.1 in (2.6 mm) (NO changing electrical state) 0.17 in (4.3 mm) (total travel) Operating force 3.5 N (NC changing electrical state) 3.8 N (NO changing electrical state) Nov 06, 2017 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applicationsMechanical durability 5000000 cycles Connections - terminals Screw clamp terminals: <= 2 x 1.5 mm with cable end conforming to EN/IEC 60947-1 Screw clamp terminals: >= 1 x 0.22 mm without cable end conforming to EN/IEC 60947-1 Tightening torque 7.08...10.62 lbf.in (0.8...1.2 N.m) conforming to EN/IEC 60947-1 Shape of screw head Cross, Philips no 1 Cross, pozidriv No 1 Slotted, flat 4 mm Slotted, flat 5.5 mm Contacts material Silver alloy (Ag/Ni) Short-circuit protection 10 A by gG cartridge fuse conforming to EN/IEC 60947-5-1 Ith conventional free air thermal 10 A conforming to EN/IEC 60947-5-1 current Ui rated insulation voltage 600 V (degree of pollution: 3) conforming to EN/IEC 60947-1 Uimp rated impulse withstand voltage 6 kV conforming to EN/IEC 60947-1 Ie rated operational current AC-15, A600: Ue = 120 V Ie = 6 A conforming to EN/IEC 60947-5-1 AC-15, A600: Ue = 240 V Ie = 3 A conforming to EN/IEC 60947-5-1 AC-15, A600: Ue = 600 V Ie = 1.2 A conforming to EN/IEC 60947-5-1 DC-13, Q600: Ue = 125 V Ie = 0.55 A conforming to EN/IEC 60947-5-1 DC-13, Q600: Ue = 250 V Ie = 0.27 A conforming to EN/IEC 60947-5-1 DC-13, Q600: Ue = 600 V Ie = 0.1 A conforming to EN/IEC 60947-5-1 Electrical durability 1000000 cycles AC-15, 2 A at 230 V, operating rate: 3600 cyc/h, load factor: 0.5 conforming to EN/ IEC 60947-5-1 appendix C 1000000 cycles AC-15, 3 A at 120 V, operating rate: 3600 cyc/h, load factor: 0.5 conforming to EN/ IEC 60947-5-1 appendix C 1000000 cycles AC-15, 4 A at 24 V, operating rate: 3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C 1000000 cycles DC-13, 0.2 A at 110 V, operating rate: 3600 cyc/h, load factor: 0.5 conforming to EN/ IEC 60947-5-1 appendix C 1000000 cycles DC-13, 0.5 A at 24 V, operating rate: 3600 cyc/h, load factor: 0.5 conforming to EN/ IEC 60947-5-1 appendix C Electrical reliability < 10exp(-6) at 5 V, 1 mA conforming to EN/IEC 60947-5-4 < 10exp(-8) at 17 V, 5 mA conforming to EN/IEC 60947-5-4 Environment Protective treatment TH Ambient air temperature for storage -40...158 F (-40...70 C) Ambient air temperature for operation -40...158 F (-40...70 C) Electrical shock protection class Class II conforming to IEC 60536 IP degree of protection IP69 IP66 conforming to IEC 60529 IP69K NEMA degree of protection NEMA 13 NEMA 4X IK degree of protection IK03 conforming to EN 50102 Standards EN/IEC 60947-5-5 EN/IEC 60947-5-4 EN/IEC 60947-1 CSA C22.2 No 14 JIS C 4520 UL 508 EN/IEC 60947-5-1 Product certifications UL listed CSA Vibration resistance 5 gn (12...500 Hz) conforming to IEC 60068-2-6 Shock resistance 30 gn (duration = 18 ms) half sine wave acceleration conforming to IEC 60068-2-27 50 gn (duration = 11 ms) half sine wave acceleration conforming to IEC 60068-2-27 Ordering and shipping details Category 22475 - WALL STATIONS Discount Schedule CS2 Nbr. of units in pkg. 1 2