XPSAK361144

Product data sheet XPSAK361144 Characteristics module XPSAK - Emergency stop - 110 V AC Main Range of product Preventa Safety automation Product or component type Preventa safety module Safety module name XPSAK Safety module application For emergency stop, switch, sensing mat/edges or safety light curtain monitoring Function of module Monitoring of electro-sensitive protection equipment (ESPE) Multiple emergency stop monitoring 2-channel wiring Emergency stop monitoring 1-channel wiring Monitoring of a movable guard associated with 2 switches and automatic start Sensing mat and edges monitoring Emergency stop with 2 NC contacts monitoring 2-channel wiring Proximity sensor monitoring Monitoring of a movable guard Safety level Can reach PL e/category 4 conforming to EN/ISO 13849-1 Can reach SILCL 3 conforming to EN/IEC 62061 Safety reliability data DC > 99 % conforming to EN/ISO 13849-1 MTTFd = 154.5 years conforming to EN/ISO 13849-1 PFHd = 7.39E-9 1/h conforming to EN/IEC 62061 Type of start Configurable Connections - terminals Captive screw clamp terminals, clamping capacity: 2 x 0.5...2 x 1.5 mm flexible cable with cable end, with double bezel Captive screw clamp terminals, clamping capacity: 1 x 0.14...1 x 2.5 mm flexible cable with cable end, with double bezel Captive screw clamp terminals, clamping capacity: 1 x 0.14...1 x 2.5 mm solid cable with cable end, with double bezel Captive screw clamp terminals, clamping capacity: 1 x 0.25...1 x 1.5 mm flexible cable with cable end, with double bezel Captive screw clamp terminals, clamping capacity: 1 x 0.25...1 x 2.5 mm flexible cable with cable end, with double bezel Captive screw clamp terminals, clamping capacity: 2 x 0.14...2 x 0.75 mm flexible cable with cable end, with double bezel Captive screw clamp terminals, clamping capacity: 2 x 0.14...2 x 0.75 mm solid cable with cable end, with double bezel Captive screw clamp terminals, clamping capacity: 2 x 0.25...2 x 1 mm flexible cable with cable end, with double bezel Output type Relay instantaneous opening 3 NO, volt-free Number of additional circuits 1 NC + 4 solid state outputs Us rated supply voltage 110 V AC (- 15...10 %) 24 V DC (- 15...10 %) Dec 28, 2017 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applicationsComplementary Synchronisation time between inputs Unlimited (manual start) 2 or 4 s depending of wiring (automatic start) Supply frequency 50/60 Hz Power consumption in VA <= 6 VA AC Input protection type Internal, electronic Uc control circuit voltage 24 V DC Line resistance 28 Ohm Breaking capacity C300 : 180 VA, AC-15 (holding) for relay output C300 : 1800 VA, AC-15 (inrush) for relay output Breaking capacity 1.5 A at 24 V (DC-13) time constant: 50 ms for relay output Output thermal current 6 A per relay for relay output Ith conventional free air thermal 18 A current Associated fuse rating 4 A fuse type gG or gL for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200 6 A fuse type fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200 Minimum output current 10 mA for relay output Minimum output voltage 17 V for relay output Response time on input open <= 40 ms Ui rated insulation voltage 300 V (degree of pollution: 2) conforming to DIN VDE 0110 part 1 300 V (degree of pollution: 2) conforming to IEC 60947-5-1 Uimp rated impulse withstand voltage 4 kV overvoltage category III conforming to IEC 60947-5-1 4 kV overvoltage category III conforming to DIN VDE 0110 part 1 Local signalling 4 LEDs Current consumption 30 mA at 24 V AC (on power supply) Mounting support 35 mm symmetrical DIN rail Product weight 0.4 kg Environment Standards EN/IEC 60947-5-1 EN/IEC 60204-1 EN 1088/ISO 14119 EN/ISO 13850 Product certifications UL CSA TV IP degree of protection IP20 (terminals) conforming to EN/IEC 60529 IP40 (enclosure) conforming to EN/IEC 60529 Ambient air temperature for operation -10...55 C Ambient air temperature for storage -25...85 C Contractual warranty Warranty period 18 months 2