Power Entry Modules with Line Filter DC22 www.schurter.com/pg06 IEC Appliance Inlet C14 with Filter, Line Switch 1- or 2-pole, PCB Mounting Standard- or Medical-Filter C14 70 C Description Characteristics - PanelMount: - Ultra-compactdesign Screw-onmounting on PCB fromr ear-side - All single elements are already wired - Lineswitch non-illuminated orilluminated - 3Functions: - With EMC-shield Appliance Inlet Protection class I,Line Switch 1 - or 2-pole, Line filter in - Especially suitablefor use in switching powersupplies standard and medical version Idealfor application with high transient loads - For PCB mounting - Qualifiedfor use in equipment according IEC/EN 60950 Approvals Other versions on request - VDECertificate Number: 40001522 - Fixing onPCB with self-tapping scr ews 3 mm or pre-inserted nuts M3 - ULFile Number: E72928 - Otherr ocker marking - Illuminatedgr een - Medicalversion M80 - Capacitance CX1 References Alternative: versionwithout line filter DC21 Weblinks pdf, html, General Product Informatio n, Approvals, RoHS, CHINA-RoHS, MatingConnector s, e-Store, SCHURTER-Stock-Check, Distributor- Stock-Check, Accessories Newly available variants correspondingto V-Lock mating cordset. The connectoris equipped with a notchintended for use with the latching cordset. The cord latching systempr events againstaccidental removalof the cordset. Technical Data Ratings IEC 1 - 10 A Ta 40 C /250 VAC 50 Hz Appliance-Inlet/-Outlet C14acc. to IEC/EN 60320-1, UL 498CSA C22.2 no. 42 (forcold Ratings UL/CSA 1- 10 A Ta 40C / 125 VAC 60 Hz conditions) pin-temperature 70 C, 10 A, LeakageCurr ent standard< 0.5 mA(250 V / 60 Hz) ProtectionClass 1 medical< 5A (250V / 60 Hz) Line Switch Rocker switch 1 or 2pole, non-illumi - Dielectric Strength > 1.7 kVDCbetween L-N natedor illuminated r ed,acc. to IEC > 2.7 kVDC between L/N-PE 61058-1 Testvoltage (2 sec) Technicaldetail s Allowable OperationT emp. -25 Cto 85 C Line Filter Standard and MedicalV ersion, IEC Climatic Category 25/085/21acc. to IEC 60068-1 60939,IEC 60601-1,UL 1283, UL 544, Degreeof Protection from frontside IP 40 acc. to IEC 60529 EN133 200, CSAC22.2 no. 8 ProtectionClass Suitablefor appliances with pr otection Technical detail s class 1acc. to IEC 61140 MTBF >2 100 000 hacc. to MIL-HB-217 F Terminal For PCB mounting Ground terminal: Quick connect terminals6.3 x 0.8 mm angled to pinaxis PanelThickness s Screw: max 4 mm Mounting screw torquemax 0.5 Nm Material: Housing Thermoplastic, black, UL 94V-0 EMC Products R4.4 Power Entry Modules with Line Filter DC22 www.schurter.com/pg06 Dimensions 57.6 mm Screw on PCB mounting 46.8 57.6 39 5.8 47.6 4.2 2.2 R 4 30 R 5.1 0.05 R4.2 N PE L 1) 0.10 1.25 32.7 0.85 30.4 4.3 0.15 8.1 47.05 39 16.2 1) all pins 0.10 6.05 38 2) L 0.20 32.7 3.4 PE N 28.4 1.6 1.6 3.6 2) PE additionally as quick-connect terminal 6.3 x 0.8 Technical Data of Filter-Components Rated Current Filter-Type Inductances Capacitance Capacitance R M A L mH CX nF CY nF 1 Standard Version 2 x 10 100 2.2 1 2 Standard Version 2 x 4 100 2.2 1 4 Standard Version 2 x 1.5 100 2.2 1 6 Standard Version 2 x 0.8 100 2.2 1 10 Standard Version 2 x 0.3 100 2.2 1 1 Medical Version (M5) 2 x 10 100 - 1 2 Medical Version (M5) 2 x 4 100 - 1 4 Medical Version (M5) 2 x 1.5 100 - 1 6 Medical Version (M5) 2 x 0.8 100 - 1 10 Medical Version (M5) 2 x 0.3 100 - 1 EMC Products 2 +0.10 0 +0.10 0 19.5 6.05 2.5 34 4.5 37.6 3.95 10.5 41 6.6 0.20 38 2.8 0.15 16.2 32.5 3.6 0.10 34.4