ArchMixGroveBreakout
SKU 103030315
ArchMixGroveBreakoutisashielddesignedfor .ItincludesmanyGroveinterfaceswhichare
Arch Mix
compatiblewithGroveproducts.
This Grove Breakout is a shield designed for Arch Mix. With the help of this breakout shield,
you neednt worry about the jump wires overspread your Arch Mix Development Board. All
you need is a bundle of Grove cables cause there are Grove interfaces on the shield for you
to connect the Grove modules. It is much more convenient for you to use the Grove
products.
There are 11 Grove interfaces and an SWD-DEBUG interface on the Arch Mix Grove
Breakout. As a matter of fact, you can use an SWD adapter to debug the Arch Mix from this
interface. Interface details are shown in the table below.
Quantity
Interface Type Name
2
Analog A1, A2
2
Digital D0, D1
I2C I2C 2
PWM PWM1,PWM2 2
UART UART1, UART2, DEBUG-UART 3
SWD DEBUG-SWD 1
This Breakout shield does not have a power supply, and all the power is provided by the
Arch Mix Dev. Board.
Specification
Compatible board: Arch Mix
Power supply: Provided by Arch Mix
Interface Mode: Grove interface
Digital interface: 2
Analog interface: 2
PWM interface: 2
I2C interface: 2
UART Interface : 3 (including a Debug-UART)
Part List
1xArch Mix Grove Breakout