TClamp0602N Low Capacitance TVS for Ethernet and Telecom Interfaces PROTECTION PRODUCTS - TransClamp Features Description Transient protection for high-speed data lines to A TransClamp is a low capacitance TVS array de- signed to protect high speed data interfaces. This Bellcore 1089 (Intra-Building) 100A (2/10 s) series has been specifically designed to protect sensi- IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) tive components which are connected to data and transmission lines from overvoltage caused by ESD IEC 61000-4-5 (Lightning) L5, 95A (8/20 s) (electrostatic discharge), CDE (Cable Discharge Protects two lines in common and differential mode Events), and Lightning. Low capacitance (12pF line-to-line) These devices integrate low capacitance, surge-rated Low operating voltages (6V) compensation diodes with a high power transient Low clamping voltage voltage suppressor (TVS). The compensation diodes Small SLP Package saves board space are arranged in a bridge pattern allowing the device to Solid-state technology be connected in common mode and/or differential mode. This allows the designer maximum flexibility and Mechanical Characteristics reduces parts count. The capacitance of the device is SLP2626P10 10L package limited to 12pF maximum from line-to-line to ensure RoHS/WEEE Compliant correct signal transmission on high-speed lines. Nominal Dimensions: 2.6 x 2.6 x 0.60 mm These devices may be used to meet Bellcore GR-1089- Lead Pitch: 0.5mm CORE short-haul (intra-building) surge requirements and will withstand a minimum 100 A surge for a 2/10s Molding compound flammability rating: UL 94V-0 pulse. Marking: Marking Code TM The TClamp 0602N is in a 10-pin, RoHS/WEEE Packaging: Tape and Reel compliant, SLP2626P10 package. It measures 2.6 x Applications 2.6 x 0.60mm. The leads are spaced at a pitch of 0.5mm and are finished with lead-free NiPdAu. They T1/E1 are particularly well suited for applications where board T3/E3 space is at a premium such as integrated connectors/ 10/100 Ethernet magnetics and T1/E1 equipment. Integrated Magnetics Carrier Class Equipment ISDN Interfaces Circuit Diagram Package Configuration 2.60 C L 12 LINE 1 (1, 2, 3) 2.60 C L Center Tab 0.50 BSC 0.60 LINE 2 (8, 9, 10) 10 Pin SLP package (Bottom Side View) Nominal Dimensions in mm www.semtech.com Revision 5/23/2007 1TClamp0602N PROTECTION PRODUCTS Absolute Maximum Rating Rlating Seymbo Vsalu Unit PPeak Pulse Power (tp = 8/20 s) 2s500 Watt pk PIeak Pulse Current (tp = 2/10 s) 1A20 PP PIeak Pulse Current (tp = 8/20 s) 9A5 PP ESD per IEC 61000-4-2 (Air) V 30 kV ESD ESD per IEC 61000-4-2 (Contact) 30 OTperating Temperature -C55 to +125 J STtorage Temperature -C55 to +150 STG o Electrical Characteristics (T=25 C) TClamp0602N Plarameter SsymboCmondition MlinimuTmypicaMsaximu Unit RVeverse Stand-Off Voltage 6V RWM RVeverse Breakdown Voltage I=81mA6V. BR t RIeverse Leakage Current V=56V, T=25C A R RWM CVlamping Voltage I = 100A, tp = 2/10s 2V5 C PP Line-to-Ground CVlamping Voltage I = 100A, tp = 2/10s 2V9 C PP Line-to-Line JCunction Capacitance Line-to-Gnd 2F5 p j V = 0V, f = 1MHz R Line-to-Line 1F2 p V = 0V, f = 1MHz R www.semtech.com 2007 Semtech Corp. 2