CONVERTERS AND INTERFACES K-LINE K109PT PT100 Converter INPUT: PT100 at 2,3,4 wires with zero and span configurable by dip-switch OUTPUT: N.1 channel current 0/4..20, 20..4/0 mA or voltage 0..5/10, 10..0, 1..5 Vdc Galvanic isolation at 3-way. Spring-cage terminal block and/or DIN bus connection system Power bridging terminal - DIN rail bus connector Tiny dimensions (102,5 x 93,1 x 6,2 mm) Resolution 14 bit Precision class 0.1% K-LINE Temperature convertersTECHNICAL DATA KK110099PPT T PTP10T01 0C0o ncvoenrtveer rter ORDER CODES PT100 converter K109PT Accessories Expandable power supply connector K-BUS K-SUPPLY Power Supply module with surge protection GENERAL FEATURES Power supply 19,230 Vdc Design Terminal housing for mounting on 35 mm DIN 46277 Channels N.1 Filter rejection 50-60 Hz (settable) -Inputs signal setup Accuracy Error: 0,1% (max range) or DIP Switch -Output signal setup (40 K / temp + 0.05) % (Measurement range) Setting error Status indicators Processing Floating point 32 bit Wrong connection Dimensions 6,2 x 93,1 x 102,5 mm (w x h x d) Internal improper functioning Galvanic Isolation Power supply // input // output at 1500 Vac, digital Weight 50 g Hot swapping Yes Operating temperature -20..+65 C 2 Power consumption 500 mW Connections Plug-in screw clamp terminal blocks, wires up to 2.5 mm A/D Converter 14 bit IP Protection IP 20 EN50081-2 Approximately 25 mA Current output protection Standards EN50082-2 - 102.5% of full scale value, in case of over-range EN61010-1 Security output - 105% of full scale value in case of improper functioning EN60742 Humidity Approvals CE 30..90% a +40C (not condensing) INPUT OUTPUT PT100 probe, EN 60751/A2 (ITS90) Current: 0..20 mA, 4..20 mA, 20..0 mA e 20..4 mA Connection by 2, 3 or 4 wires Higher load resistance: 500 Ohm Current on sensor: < 900 uA Voltage: 0..5 Vdc, 1..5 Vdc, 0..10 Vdc and 10..0 Vdc Cable resistance: Max. 20 Ohm per wire Lower load resistance: 2 KOhm Measurement Range: -150..650 C Min span : 50C DIMENSIONS AND INSTALLATION Inserting / Extracting module on DIN guide Expandable connector K-BUS Cage clamp connection Power supply Output Input